The YG series gloss meters have been specially developed for precise gloss measurements in the printing, paper, film, plastics and coatings industries. The instruments combine high measurement accuracy, a compact design and professional quality control functions for use in laboratories, production and incoming goods inspection. Depending on the model, single, dual or multi-angle measurements, micro-aperture technology, statistical analysis functions and the professional GQC6 quality management software are available. The instruments comply with international standards such as JJG696 and are suitable for precise industrial surface analysis. Model overview YG45 High Precision Gloss Meter 45° gloss measurement Ideal for the film, paper and plastics industries Four measurement modes Button operation GQC6 Quality Management Software Professional specialist instrument for surfaces with medium to high gloss levels YG47 Dual-Angle Gloss Meter 45° and 75° dual-angle measurement For the film, printing and paper industries Four measurement modes Simultaneous multi-angle measurement GQC6 quality management software Ideal for precise print and film analysis YG75 High Precision Gloss Meter 75° gloss measurement Optimised for the printing industry and matt surfaces Four measurement modes GQC6 Quality Control Software Professional gloss meter for printing and paper applications YG60M Micro-aperture Gloss Meter 60° gloss measurement Micro-aperture technology For small or hard-to-reach measurement surfaces Precise detailed measurements YG268 Tri-angle Gloss Meter 20° / 60° / 85° multi-angle measurement Four measurement modes Button operation GQC6 quality management software Universal professional gloss meter for a wide range of gloss levels YG60 Gloss Meter 60° standard gloss measurement Four measurement modes Button operation GQC6 quality management software Compact solution for standard industrial measurements YG60S Economic Gloss Meter 60° standard gloss measurement Basic measurement mode Without software Particularly cost-effective entry-level solution for simple gloss control Measurement angles and applications The YG series offers different measurement angles for specific industrial applications: 20° For high-gloss surfaces 45° Specially designed for the film, paper and printing industries 60° Universal standard angle for medium gloss levels 75° For matt surfaces and printing applications 85 For low-gloss and matt surfaces The YG45, YG47 and YG75 models in particular have been specially designed for: Printing industry Paper industry Film production Packaging industry Plastics industry Ceramics industry Measurement modes and quality control The professional YG models support four intelligent measurement modes: Basic Measurement Statistical Measurement Continuous Measurement Quality Control Measurement The QC mode enables: PASS/FAIL evaluation Limit monitoring Incoming goods inspection Batch testing Quality analysis Continuous measurement mode is ideal for: Production monitoring Surface homogeneity Process control In-line quality inspection Dual-angle technology YG47 The YG47 model features two measurement angles: 45° 75° Both angles can be measured simultaneously. This makes the device particularly suitable for: Print quality control Paper surfaces Film materials Packaging printing Plastic surfaces Ceramic surfaces Simultaneous multi-angle measurement enables a particularly precise assessment of complex surface structures and varying degrees of gloss. Micro-aperture technology YG60M The YG60M was developed for precise measurements on small surfaces. Micro-aperture technology is ideal for: small components narrow measurement ranges textured surfaces precise detailed measurements hard-to-reach areas Precision and measurement performance The devices meet the requirements of: JJG696 international industrial gloss measurement standards Typical performance data: Measurement speed approx. 0.5 seconds Resolution up to 0.1 GU Repeatability up to ±0.2 GU Measurement ranges up to 800 GU The optimised optical design ensures: high reproducibility stable measurement results precise quality control low instrument deviation Software and data management The YG45, YG47, YG75, YG268 and YG60 models support the professional GQC6 quality management software. Software functions: Measurement data management QC reports Data export PC connection Online measurement Statistical analysis Documentation Reporting The YG60S model is supplied without software and is suitable for simple standalone measurements. Ergonomics and portability The YG series instruments feature an ergonomic handheld design and are suitable for both laboratory applications and mobile use in production. Technical features: Compact design Weight approx. 300 g AA battery or rechargeable battery Over 10,000 measurements per charge USB interface Multilingual user interface The ergonomic design ensures comfortable use even during extended measurement sessions. Professional gloss measurement for print, film and industry We are happy to assist you in selecting the right gloss meter for quality control, surface analysis and industrial gloss measurement. Get advice now

The portable gloss meters in the HG and NHG series have been developed for precise gloss measurements and professional surface analysis in industry, laboratories and quality control. The instruments enable fast and reproducible gloss measurements on a wide variety of materials and surfaces – from high-gloss coatings to matt or textured materials. Depending on the model, single-angle or multi-angle measurements, touchscreen operation, statistical analysis functions and professional GQC6 quality management software are available. The instruments comply with international standards such as ISO 2813, ASTM D523, ASTM D2457 and JJG696. Model overview NHG268 Multi-angle Precise Gloss Meter 20° / 60° / 85° multi-angle measurement Touchscreen operation Three measurement modes + QC mode Measuring range up to 2000 GU GQC6 Quality Management Software Professional high-end gloss meter for precise surface analysis HG268 Tri-angle Gloss Meter 20° / 60° / 85° multi-angle measurement Basic measurement mode Measuring range up to 1000 GU GQC6 quality management software Cost-effective multi-angle solution for industrial gloss measurement NHG60 Precise Gloss Meter 60° gloss measurement Touchscreen operation Statistical measurement and QC mode Measurement range up to 1000 GU GQC6 Quality Management Software Professional precision gloss meter for industrial quality control NHG60M Micro-aperture Gloss Meter 60° gloss measurement Micro-aperture 1.5 × 2 mm Touchscreen operation Continuous measurement and QC mode GQC6 quality management software Ideal for small or hard-to-reach measurement surfaces HG60 Economic Gloss Meter 60° gloss measurement Basic measurement mode Measuring range up to 300 GU GQC6 Quality Control Software Compact and economical standard gloss meter HG60S Economic Gloss Meter 60° gloss measurement Basic measurement mode Measuring range up to 200 GU No touchscreen No software Particularly cost-effective entry-level solution for simple gloss measurement Measurement angles and gloss ranges The devices support various measurement angles for different gloss ranges: 20° For high-gloss surfaces 60° Universal standard angle for medium gloss levels 85° For matt or low-gloss surfaces The multi-angle models NHG268 and HG268 enable the precise analysis of a wide variety of surfaces using just one instrument. This makes them ideal for: High-gloss lacquers Matt finishes Plastics Metal surfaces Wood coatings Ceramics Stone materials Applications The HG and NHG series gloss meters are suitable for: Automotive industry Paint and coatings industry Printing industry Plastics industry Paper industry Wood and furniture industry Ceramics industry Stone and building materials industry Metal and hardware industry Packaging industry Typical applications: Determination of gloss level Quality control Production monitoring Surface analysis Incoming goods inspection Comparative measurements Homogeneity testing Batch control Measurement modes and quality control The NHG series offers several professional measurement modes: Basic Measurement Statistical Measurement Continuous Measurement QC Measurement The continuous measurement mode is particularly suitable for: Homogeneity testing of large areas Process control Surface analysis Production monitoring The QC functions enable: PASS/FAIL evaluation Statistical analysis Calculation of mean values Deviation analysis Quality reports NHG60M micro-aperture technology The NHG60M features a micro-aperture measuring just 1.5 × 2 mm and is particularly suitable for: small components narrow measurement ranges textured surfaces precise detailed measurements hard-to-reach areas This enables reliable gloss measurement even on very small surfaces. Precision and measurement performance The instruments comply with the requirements of: ISO 2813 GB/T 9754 ASTM D523 ASTM D2457 JJG696 Measurement accuracy: Repeatability up to ±0.1 GU Reproducibility up to ±0.2 GU Resolution up to 0.1 GU Measurement speed: HG268: approx. 0.1 seconds NHG268: approx. 1.0 seconds NHG60 / HG60 / HG60S: approx. 0.5 seconds Software and data management The NHG268, NHG60, NHG60M, HG268 and HG60 models support the professional GQC6 quality management software. Software functions: Gloss data management Measurement data export QC reports Statistical analysis Documentation Data archiving PC connection The HG60S model is supplied without software and is suitable for simple standalone measurements. Ergonomics and portability All models feature an ergonomic handheld design with a robust industrial build. Technical specifications: 3200 mAh lithium-ion battery Over 10,000 measurements per charge Weight approx. 350 g USB and RS232 interfaces 3.5" TFT display Multilingual user interface The touchscreen models in the NHG series offer particularly user-friendly operation and quick navigation through measurement and analysis functions. Professional gloss measurement for industry and quality control We are happy to assist you in selecting the right gloss meter for surface analysis, quality management and industrial gloss measurement. Get advice now

The YT6200, YT6300 and YT6500 three-angle gloss meters with touchscreens are professional dual-purpose instruments designed for fast and accurate non-destructive coating thickness measurement on metallic substrates. The instruments combine magnetic induction and eddy current measurement in an integrated sensor system, thereby enabling reliable measurements on both magnetic and non-magnetic materials. Thanks to automatic substrate detection, the instruments are ideal for measuring paints, powder coatings, electroplated layers, galvanised coatings, chrome layers, as well as protective and insulating coatings on steel, aluminium, stainless steel, copper and other metals. The models differ mainly in their maximum measurement range: YT6200: 0–2000 µm YT6300: 0–3000 µm YT6500: 0–5000 µm Dual-use measurement method The integrated Fe/NFe probe automatically detects the respective substrate and independently selects the appropriate measurement method: Magnetic induction for magnetic substrates such as steel Eddy current method for non-magnetic metals such as aluminium or stainless steel This enables fast, convenient and precise measurement without the need for manual switching. Precise coating thickness control The YT series enables highly accurate measurements of a wide variety of coatings: Paints Powder coatings Galvanised coatings Electroplated layers Chrome and copper layers Protective coatings Insulating coatings High repeatability and multiple calibration methods ensure stable and reproducible measurement results, even in demanding industrial applications. Functions and features The devices feature advanced functions for professional quality control: Automatic material recognition Non-destructive measurement Wide measuring range up to 5000 µm IPS colour display Multiple measurement and statistical modes Zero-point, single-point and multi-point calibration Fast measurement speed Internal data memory Compact and robust design Depending on the model, the devices also support USB and Bluetooth communication for convenient data transfer and documentation. Typical applications The YT series three-angle gloss meters with touchscreens are suitable for: Automotive industry Mechanical engineering Surface technology Electroplating plants Metalworking Corrosion protection Quality assurance Incoming goods inspection Industrial coating processes Paint and powder coating systems The devices are suitable for both mobile on-site measurements and continuous quality control in industrial manufacturing processes. Assistance with selection We are happy to assist you in selecting the right three-angle gloss meter with touchscreens for your application and your required measurement range. Get advice now

The portable spectrodensitometers in the YD5000 Plus series combine high-precision colour measurement with professional density measurement for modern printing and colour management applications. The YD5010 Plus and YD5050 Plus models utilise advanced 45/0 geometry, grating spectroscopy and high-resolution CMOS sensors for the precise analysis of colour values, print densities and print parameters. The devices have been specially developed for applications in offset printing, packaging printing, textile printing, the plastics industry and quality control. Thanks to ISO 13655-compliant measurement conditions, UV support and comprehensive print parameter analysis, the YD5000 Plus models are ideally suited for professional process control and colour management in industrial printing environments. Applications The spectrodensitometers of the YD5000 Plus series are particularly suitable for: Offset printing Packaging printing Flexographic printing Digital printing Textile printing and dyeing Sheet and film processing Plastics industry Electronics manufacturing Paper and packaging production Print quality control Colour management and process control The devices were specially designed for measuring: CMYK densities Dot gain Overprint behaviour Print contrast Tonal errors Grey balance Printing characteristics Colour deviations and offer professional support for modern printing processes. Model overview YD5050 Plus Portable Spectrodensitometer – Advanced Edition 45/0 geometry with ring illumination CMYK density measurement Bluetooth 5.0 + USB communication Integrated UV light source Measurement conditions M0 / M1 / M2 / M3 in accordance with ISO 13655 Selectable apertures: Ø2 mm / Ø4 mm / Ø8 mm Repeatability: ΔE*ab ≤ 0.03 Inter-instrument deviation: ΔE*ab ≤ 0.18 Data memory: 20,000 measured values Integrated density scanning Advanced print parameter analysis YD5010 Plus Portable Spectrodensitometer – Basic Edition 45/0 geometry with ring illumination CMYK density measurement USB communication Integrated UV light source Measurement conditions M0 / M1 / M2 / M3 in accordance with ISO 13655 Selectable apertures: Ø2 mm / Ø4 mm / Ø8 mm Repeatability: ΔE*ab ≤ 0.04 Inter-instrument deviation: ΔE*ab ≤ 0.20 Data memory: 10,000 measurements Professional entry-level solution for print and colour control Optical technology and measurement system The YD5000 Plus series devices operate using modern 45/0 geometry in accordance with ISO 5-4 and CIE No. 15. The annular 45° illumination with 0° observation ensures reproducible and standard-compliant print measurements. Technical features: 45/0 geometry Concave grating spectroscopy 256-pixel dual-array CMOS sensor Combined LED and UV light source Wavelength range: 400–700 nm Wavelength interval: 10 nm Half-width: 10 nm Measurement time approx. 1.5 seconds Capacitive 3.5" TFT colour display The instruments support the ISO 13655 measurement conditions: M0 – Light source A M1 – D50 M2 – UV excluded M3 – Polarisation + UV excluded This makes the devices ideal for standardised print measurements and international colour communication. Densitometric functions The YD5000 Plus series offers comprehensive densitometric analysis functions for professional print control: Supported density standards: ISO Status A ISO Status E ISO Status I ISO Status T Measurement functions: CMYK density Density difference Dot area Dot gain Overprint rate Print contrast Printing characteristics Tonal error Grey balance The YD5050 Plus model also supports: Density scanning advanced print parameter analysis Comprehensive quality assessments Colorimetric analysis In addition to density measurement, both models enable comprehensive spectrophotometric colour analysis. Supported colour spaces: CIE LAB XYZ Yxy LCh Also available on the YD5050 Plus: CIE LUV HunterLAB Colour difference formulas: ΔE*ab ΔE94 ΔE00 Also available on the YD5050 Plus: ΔE*uv ΔEcmc(2:1) ΔEcmc(1:1) ΔE(Hunter) Other features of the YD5050 Plus: Whiteness Index (WI) Yellowness Index (YI) Metamerism Index (MI) Opacity Flexible apertures Both models support individually selectable apertures: Ø2 mm Ø4 mm Ø8 mm This makes the devices suitable for: fine print elements screen areas small measurement fields packaging printing textile printing textured surfaces Large-scale print samples Software and data management The devices support professional print and colour control via PC software as well as modern data transfer. Functions: Print quality control CMYK analysis Printing characteristics Colour difference analysis Process control Measurement data management Quality reports Colour comparison Communication: YD5010 Plus: USB YD5050 Plus: USB + Bluetooth 5.0 Data storage: YD5010 Plus: 10,000 readings YD5050 Plus: 20,000 readings Ergonomics and portability The YD5000 Plus series spectrodensitometers combine an ergonomic handheld design with professional-grade industrial hardware. Features: Capacitive touchscreen Robust housing Lithium-ion battery Up to 5,000 measurements per charge Over 3 million measurements Light source lifetime Compact design Weight approx. 600 g The devices are therefore suitable for both mobile production monitoring and for laboratory and quality management applications. Professional print and colour control We are happy to assist you in selecting the right spectrodensitometer for the printing industry, packaging, colour management and quality control. Get advice now

The YS4500 series of portable spectrophotometers has been developed for high-precision colour and spectral measurements in industry, laboratories and quality management. The YS4580, YS4560 and YS4510 models combine modern 45/0 geometry, planar grating spectroscopy and high-performance CMOS sensors to deliver accurate and reproducible measurement results. With various aperture sizes, UV support and modern colour management functions, the instruments are ideally suited for applications in the paint, plastics, printing, textile, coating and road signage industries. The combination of high measurement accuracy, ergonomic handheld design and powerful software makes the YS4500 series a professional solution for mobile and stationary colour control. Areas of application The YS4500 series is suitable for: Paints, varnishes and coatings Plastics and injection moulding industry Printing and packaging Textile and clothing industry Ceramics industry Road signs and reflective films Automotive industry Cosmetics and consumer goods Laboratory and research applications Colour matching and quality control Models with a UV light source also enable precise measurements of fluorescent materials, optical brighteners and reflective surfaces. In particular, the YS4560 and YS4580 models have been specially optimised for the analysis of traffic signs, road markings and reflective films. Model overview YS4580 Portable Spectrophotometer 45/0 geometry with ring illumination Large single aperture: Ø20 mm Integrated UV light source Bluetooth 4.0 + USB communication Spectral range: 400–700 nm Repeatability: ΔE*ab ≤ 0.04 Inter-instrument deviation: ΔE*ab ≤ 0.20 Specialised instrument for road signs, reflective materials and large or uneven surfaces YS4560 Portable Spectrophotometer 45/0 geometry with ring illumination Dual aperture: Ø8 mm / Ø10 mm and Ø4 mm / Ø5 mm Integrated UV light source Bluetooth 4.0 + USB communication Spectral range: 400–700 nm Repeatability: ΔE*ab ≤ 0.03 Inter-instrument deviation: ΔE*ab ≤ 0.15 Professional high-precision instrument for laboratory use, colour transfer and fluorescent materials YS4510 Portable Spectrophotometer 45/0 geometry with ring illumination Selectable individual apertures: Ø8 mm / Ø4 mm / Ø2 mm USB communication Spectral range: 400–700 nm Repeatability: ΔE*ab ≤ 0.05 Inter-instrument deviation: ΔE*ab ≤ 0.20 Flexible solution for small measurement ranges and industrial colour control Optical technology and sensor technology The YS4500 series instruments operate using modern 45/0 geometry in accordance with international standards such as CIE No. 15, ISO 7724-1, ASTM E1164 and DIN 5033 Part 7. Stable and true-to-life colour measurements are achieved through annular 45° illumination and vertical observation. Technical features: 45/0 geometry with ring illumination Concave grating spectroscopy 256-element dual-array CMOS sensor Full-spectrum LED light source Partial additional UV light source Integration system Ø48 mm Reflectance measurement range: 0–200% Wavelength range: 400–700 nm Wavelength interval: 10 nm Half-width: 10 nm Measurement time approx. 1.5 seconds Capacitive 3.5" TFT colour display Apertures and flexible measurement The various aperture sizes allow flexible adaptation to a wide variety of surfaces and sample sizes. This enables both large areas and small or structured measurement areas to be analysed precisely. The small apertures are particularly suitable for: narrow printed elements textiles small plastic parts textured surfaces edge areas Laboratory samples with a limited measurement area The YS4580’s large 20 mm aperture has been specially designed for: traffic signs Road markings reflective films uneven or coarse-grained materials Large-area samples Colorimetric functions The instruments support comprehensive colour and quality analyses: CIE LAB XYZ Yxy LCh CIE LUV HunterLAB βxy Supported colour difference formulas: ΔE*ab ΔE*uv ΔE94 ΔEcmc ΔE00 ΔE(Hunter) Additional analysis functions: Whiteness Index (WI) Yellowness Index (YI) Tint Index (TI) Metamerism Index (MI) Colour Strength Opacity Colour Fastness Staining Fastness Polygon tolerance assessment for road signs 8° Glossiness Traffic sign and reflection analysis The YS4560 and YS4580 models feature built-in functions for analysing road signs, road markings and reflective films. The instruments already include standard colour spaces in accordance with: GB 2893 GB/T 18833 In addition, polygonal tolerance ranges can be defined individually. This allows for: Luminance factor Chromaticity coordinates Reflectance values PASS/FAIL assessments for road signs and reflective materials to be checked quickly and in accordance with standards. Software and data management The YS4500 series supports professional colour management and quality control via PC software as well as Bluetooth and USB communication. Functions: Colour difference analysis PASS/FAIL evaluation Spectral diagrams Colour matching support Measurement reports Quality reports Colour comparison and archiving Data storage: YS4510: 500 standards + 20,000 measurement data points YS4560 / YS4580: 1,000 standards + 30,000 measurement data Special features The instruments feature an ergonomic handheld design with a capacitive touchscreen and stable white reference calibration. Automatic calibration improves measurement reliability and reduces operator error. The long-lasting full-spectrum LED light sources can perform more than 3 million measurements or last for approximately 5 years. The lithium-ion batteries allow for up to 5,000 measurements within 8 hours. The YS4560 and YS4580 models also support Bluetooth communication for modern mobile colour management and wireless data transfer. Help with selection We are happy to assist you in selecting the right portable spectrophotometer for your application in the laboratory, production, road sign analysis or quality control. Get advice now

The ST series spectrophotometers from 3nh combine high-precision colour measurement with state-of-the-art spectral technology for industrial quality control, laboratory applications and production monitoring. The ST10, ST1818, ST2020, ST2222, ST700D and ST700D Plus models have been specially developed for professional colour control in plastics technology, the paint industry, printing, textiles, ceramics, packaging, electronics and many other industrial sectors. Thanks to the combination of D/8 geometry, SCI/SCE technology, high-resolution CMOS sensors and multiple aperture options, the devices enable extremely precise and reproducible colour analysis, even on difficult surfaces, small measurement areas or fluorescent materials. Depending on the model, additional functions such as UV measurement, Bluetooth data transfer, camera positioning, automatic white calibration and cloud-based colour management are available. Applications The ST series is suitable for precise colour control and colour difference analysis in: The plastics and injection moulding industry Paints, varnishes and coatings Textile and clothing industry Printing and packaging Ceramics and building materials Electronics and consumer goods Cosmetics and food industry Laboratory and research applications Thanks to various aperture sizes, both large areas and small, curved or textured surfaces can be analysed with precision. The UV models are also suitable for fluorescent materials and optical brighteners. Model overview ST10 Spectrophotometer D/8 geometry with SCI measurement Two apertures: Ø8 mm / Ø10 mm flat and pointed Repeatability: ΔE*ab ≤ 0.05 Ideal for general industrial colour control and mobile applications ST1818 Spectrophotometer D/8 geometry with SCI measurement Two apertures: Ø8 mm / Ø10 mm flat and pointed Repeatability: ΔE*ab ≤ 0.038 Improved measurement accuracy for more demanding quality control ST2020 Spectrophotometer D/8 geometry with SCI/SCE measurement Three apertures: Ø8 mm / Ø10 mm flat Ø4 mm / Ø5 mm flat 1 × 3 mm Repeatability: ΔE*ab ≤ 0.028 Ideal for small or complex measurement areas ST2222 Spectrophotometer D/8 geometry with SCI/SCE measurement Five apertures: Ø8 mm / Ø10 mm flat Ø8 mm / Ø10 mm pointed Ø4 mm / Ø5 mm flat Ø4 mm / Ø5 mm pointed 1 × 3 mm Repeatability: ΔE*ab ≤ 0.018 Includes UV measurement and Bluetooth data transfer ST700D Spectrophotometer D/8 SCI/SCE Three apertures: Ø8 mm / Ø10 mm flat Ø4 mm / Ø5 mm flat 1 × 3 mm Repeatability: ΔE*ab ≤ 0.022 Inter-instrument deviation: ΔE*ab ≤ 0.22 Camera positioning and automatic white calibration ST700D Plus Spectrophotometer D/8 SCI/SCE Five apertures: Ø8 mm / Ø10 mm flat Ø8 mm / Ø10 mm pointed Ø4 mm / Ø5 mm flat Ø4 mm / Ø5 mm pointed 1 × 3 mm Advanced multi-aperture version with UV measurement, Bluetooth and maximum flexibility for complex surfaces Optical and technical technologies The ST series instruments utilise modern planar grating spectroscopy with high-resolution CMOS or silicon photodiode array sensors. This ensures particularly stable and reproducible colour measurement – even under changing environmental conditions. Technical features: D/8 diffuse illumination with an 8° viewing angle SCI/SCE synchronous measurement depending on the model Full-spectrum LED light source Partial UV light source for fluorescent materials Planar grating spectroscopy Dual optical path system for increased stability Large-area dual-array sensors Wavelength range 400–700 nm Wavelength interval 10 nm Reflection range 0–200 % Measurement time approx. 1–1.5 seconds Measurement resolution 0.01 3.5" TFT colour touchscreen USB and Bluetooth interfaces depending on model Multiple apertures and flexible measurement The higher-end models in the ST series feature multiple aperture sizes to accommodate different sample sizes and surface structures. This allows for the precise analysis of both flat and curved surfaces, small printed elements, textiles, powders or textured materials. The combination of flat and pointed apertures enables flexible measurements directly on hard-to-reach areas or curved components. The 1 × 3 mm LAV aperture is particularly suitable for narrow lines, small print areas or special industrial applications. Colourimetric functions The ST series supports comprehensive colour analysis and quality functions: CIE LAB XYZ Yxy LCh HunterLab CIE LUV sRGB DIN Lab99 Munsell CMYK Colour density Supported colour difference formulas: ΔE*ab ΔE94 ΔE00 ΔEcmc DINΔE99 Hunter ΔE Additional analysis functions: Whiteness Index (WI) Yellowness Index (YI) Colour Strength Opacity Staining Fastness Metamerism Index 8° Gloss Colour Density Tinting Strength Intelligent calibration and camera positioning The ST series models feature intelligent calibration stations with automatic white reference calibration. This ensures consistently high measurement accuracy and reduces operator errors. The integrated camera positioning allows for precise control of the measurement area directly on the display. This improves repeatability and process reliability, particularly for small or textured measurement surfaces. Software, cloud and data management The devices support modern colour management and analysis functions via: Windows PC software SQCX Android iOS HarmonyOS WeChat applet Bluetooth printer Possible functions: Colour comparison and PASS/FAIL assessment Generation of test reports Cloud-based data storage Colour formula management Colour matching support Spectral analysis Data export and quality documentation Special features The ST series combines high measurement precision with mobile flexibility and ease of use. Thanks to their ergonomic design and powerful lithium-ion battery, the instruments are suitable for both laboratory environments and mobile use in production and incoming goods inspection. The models with SCI/SCE synchronous measurement enable particularly reliable measurement results on glossy or textured surfaces. The integrated UV technology in the higher-end models further improves the analysis of fluorescent materials and optical brighteners. Help with selection We are happy to assist you in selecting the right spectrophotometer for your application in the laboratory, production, quality control or colour management. Get advice now

The YD5000 series of portable spectrodensitometers combine high-precision colour measurement with professional density measurement for the printing and packaging industries. The YD5010 and YD5050 models utilise modern 45/0 geometry, grating spectroscopy and high-resolution CMOS sensors for the precise analysis of colour values, print densities and print parameters. The devices have been specially developed for applications in offset printing, packaging printing, textile printing, the plastics industry and quality control. Thanks to ISO 13655-compliant measurement conditions, UV support and comprehensive print parameter analysis, the YD5000 models are ideally suited for professional process control and colour management in industrial printing environments. Applications The spectrodensitometers of the YD5000 series are particularly suitable for: Offset printing Packaging printing Flexographic printing Digital printing Textile printing and dyeing Sheet and film processing Plastics industry Electronics manufacturing Paper and packaging production Print quality control Colour management and process control The devices were specially designed for measuring: CMYK densities Dot gain Overprint behaviour Print contrast Tonal errors Grey balance Printing characteristics Colour deviations and offer professional support for modern printing processes. Model overview YD5050 Portable Spectrodensitometer – Advanced Edition 45/0 geometry with ring illumination CMYK density measurement Bluetooth 5.0 + USB communication Integrated UV light source Measurement conditions M0 / M1 / M2 / M3 in accordance with ISO 13655 Selectable apertures: Ø2 mm / Ø4 mm / Ø8 mm Repeatability: ΔE*ab ≤ 0.03 Inter-instrument deviation: ΔE*ab ≤ 0.18 Data memory: 20,000 measurements Advanced print parameter analysis including density scanning YD5010 Portable Spectrodensitometer – Basic Edition 45/0 geometry with ring illumination CMYK density measurement USB communication Integrated UV light source Measurement conditions M0 / M1 / M2 / M3 in accordance with ISO 13655 Selectable apertures: Ø2 mm / Ø4 mm / Ø8 mm Repeatability: ΔE*ab ≤ 0.04 Inter-instrument deviation: ΔE*ab ≤ 0.20 Data memory: 10,000 measurements Professional entry-level solution for print and colour control Optical technology and measurement system The YD5000 series instruments operate using modern 45/0 geometry in accordance with ISO 5-4 and CIE No. 15. The annular 45° illumination with 0° observation ensures reproducible and standard-compliant print measurements. Technical features: 45/0 geometry Concave grating spectroscopy 256-pixel dual-array CMOS sensor Combined LED and UV light source Wavelength range: 400–700 nm Wavelength interval: 10 nm Half-width: 10 nm Measurement time approx. 1.5 seconds Capacitive 3.5" TFT colour display The instruments support the ISO 13655 measurement conditions: M0 – Light source A M1 – D50 M2 – UV excluded M3 – Polarisation + UV excluded This makes the devices ideal for standardised print measurements and international colour communication. Densitometric functions The YD5000 series offers comprehensive densitometric analysis functions for professional print control: Supported density standards: ISO Status A ISO Status E ISO Status I ISO Status T Measurement functions: CMYK density Density difference Dot area Dot gain Overprint rate Print contrast Printing characteristics Tonal error Grey balance The YD5050 model also supports: Density scanning advanced print parameter analysis Comprehensive quality assessments Colorimetric analysis In addition to density measurement, both models enable comprehensive spectrophotometric colour analysis. Supported colour spaces: CIE LAB XYZ Yxy LCh Also available on the YD5050: CIE LUV HunterLAB Colour difference formulas: ΔE*ab ΔE94 ΔE00 Additionally for the YD5050: ΔE*uv ΔEcmc(2:1) ΔEcmc(1:1) ΔE(Hunter) Other features of the YD5050: Whiteness Index (WI) Yellowness Index (YI) Metamerism Index (MI) Opacity Flexible apertures Both models support individually selectable apertures: Ø2 mm Ø4 mm Ø8 mm This makes the devices suitable for: fine print elements screen areas small measurement fields packaging printing textile printing textured surfaces Large-scale print samples Software and data management The devices support professional print and colour control via PC software as well as modern data transfer. Functions: Print quality control CMYK analysis Printing characteristics Colour difference analysis Process control Measurement data management Quality reports Colour comparison Communication: YD5010: USB YD5050: USB + Bluetooth 5.0 Data storage: YD5010: 10,000 readings YD5050: 20,000 readings Ergonomics and portability The YD5000 series spectrodensitometers combine an ergonomic handheld design with professional-grade industrial hardware. Features: Capacitive touchscreen Robust housing Lithium-ion battery Up to 5,000 measurements per charge Over 3 million measurements Light source lifetime Compact design Weight approx. 600 g The devices are therefore suitable for both mobile production monitoring and for laboratory and quality management applications. Professional print and colour control We are happy to assist you in selecting the right spectrodensitometer for the printing industry, packaging, colour management and quality control. Get advice now

The ST Series handheld spectrophotometers have been developed for high-precision mobile colour and spectral measurements. The ST70, ST60 and ST50 models combine modern D/8 spectrophotometry, SCI/SCE technology and high-performance sensors for professional colour control and quality management. With different spectral ranges, multiple aperture sizes, UV support and modern data communication, the instruments are ideal for laboratory, production, quality control and industrial colour communication. The ST series is based on the core technology of the TS series and offers particularly high measurement precision combined with an ergonomic and portable design. Areas of application The ST series is suitable for: Plastics and injection moulding industry Paints, varnishes and coatings Textile and clothing industry Printing and packaging Ceramics and building materials Electronics industry Cosmetics and consumer goods Laboratory and research applications Colour approval and production control The ST70 and ST60 UV models also enable precise measurements of fluorescent materials, optical brighteners and special effect surfaces. Model overview ST70 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement Spectral range: 360–780 nm Integrated UV light source Bluetooth and USB data transfer Measurement apertures: Ø8 mm / Ø4 mm / Ø1×3 mm Repeatability: ΔE*ab ≤ 0.02 Inter-instrument deviation: ΔE*ab ≤ 0.15 High-precision premium instrument for complex and small measurement ranges as well as fluorescent materials ST60 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement Spectral range: 360–700 nm Integrated UV light source Bluetooth and USB data transfer Measurement apertures: Ø8 mm / Ø4 mm Repeatability: ΔE*ab ≤ 0.025 Inter-instrument deviation: ΔE*ab ≤ 0.15 Professional multi-aperture device for precise colour control in the laboratory and production ST50 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement Spectral range: 400–700 nm Bluetooth and USB data transfer Selectable single aperture: Ø8 mm or Ø4 mm Compact and cost-effective solution for mobile colour control and quality management Optical technologies and measurement system The ST series devices utilise modern planar grating spectroscopy and high-performance silicon photodiode arrays. The combination of full-spectrum LED technology and high-resolution sensors ensures stable and reproducible measurement results. Technical features: D/8 diffuse illumination with an 8° viewing angle SCI/SCE synchronous measurement Full-spectrum LED light source Some models feature an additional UV light source Planar grating spectroscopy Dual optical path system Large-area dual-row sensors Measurement range (reflection): 0–200% Measurement time approx. 1.5 seconds 3.5" TFT colour touchscreen Camera positioning and stabiliser cross-positioning Multiple apertures and flexible measurement The ST70 and ST60 models feature multiple aperture sizes for maximum flexibility with different surfaces and sample sizes. This allows both large areas and small or textured areas to be measured precisely. The ST70’s 1×3 mm aperture is particularly suitable for: small printed elements narrow lines edge areas miniature components textured surfaces Colorimetric functions The ST series supports comprehensive colour and quality analysis: CIE LAB XYZ Yxy LCh CIE LUV HunterLab DIN Lab99 sRGB Munsell CMYK colour density Supported colour difference formulas: ΔE*ab ΔE94 ΔE00 ΔEcmc DINΔE99 ΔE(Hunter) Additional analysis functions: Whiteness Index (WI) Yellowness Index (YI) Metamerism Index Colour Strength Opacity Colour Fastness Staining Fastness 8° Gloss 555 Tone Classification Data management and software The devices support professional colour management and quality documentation via: Windows PC software Bluetooth data transfer USB interface Android and iOS support Harmony OS WeChat mini-programs Features: Colour comparison and PASS/FAIL assessment Spectral analysis Colour deviation charts Cloud and data storage Colour matching support Quality documentation and data export Special features The ST series has been specially developed for mobile and industrial use. Thanks to their ergonomic design, robust housing and powerful lithium-ion batteries, the devices are ideal for use in laboratories, production environments and in the field. Automatic white calibration ensures stable measurement results and reduces operator errors. The integrated camera positioning further improves accuracy on small or complex measurement surfaces. SCI/SCE technology also allows glossy surfaces and textured materials to be reliably assessed. Help with selection We are happy to assist you in selecting the right handheld spectrophotometer for your application in the laboratory, production, quality control or colour management. Get advice now

The MS series multi-angle spectrophotometers have been specially developed for high-precision colour and effect measurement of metallic, pearlescent and effect coatings. Thanks to their multi-angle technology, the MS series models enable precise analysis of complex surfaces from different viewing angles and under various lighting conditions. This makes them ideal for applications in the automotive industry, the paint and coatings industry, plastics technology, and in the quality management of sophisticated effect surfaces. Areas of application The MS series instruments enable precise colour difference and effect analysis of metallic, pearlescent and special effect coatings. They are used in particular in the automotive industry, for effect paints, plastic surfaces, industrial coatings, consumer goods and high-quality design surfaces. Thanks to their high measurement stability, the instruments deliver reliable results even on curved surfaces. Model variants MS3003 Multi-Angle Spectrophotometer 45° (25° / 45° / 110°) 3 measurement angles for reliable colour and effect measurement MS3005 Multi-Angle Spectrophotometer 45° (15° / 25° / 45° / 75° / 110°) 5 measurement angles for advanced effect analysis MS3006 Multi-Angle Spectrophotometer 45° (-15° / 15° / 25° / 45° / 75° / 110°) 6 measurement angles including effect parameter analysis MS3008 Multi-Angle Spectrophotometer 45° (-15° / 15° / 25° / 45° / 75° / 110°) 15° (-15° / 15°) 8 measurement angles with additional effect characterisation MS3012 Multi-Angle Spectrophotometer 45° (-15° / 15° / 25° / 45° / 75° / 110°) 15° (-45° / -30° / -15° / 15° / 45° / 80°) 12 measurement angles for maximum precision with special effects Technical highlights Measurement geometry: 3 to 12 multi-angle measurements depending on the model Light source: Full-spectrum LED with Blue Enhancement technology Sensor technology: 256-pixel CMOS dual-array image sensor Wavelength range: 400–700 nm Reflectance measurement range: 0–600% Measurement aperture: Ø12 mm Measurement time: approx. 1 second per angle Display: 3.5" TFT colour touchscreen Interfaces: USB, Bluetooth 5.0 (depending on model) Data storage: 1000 standards / 4000 samples Integrated software control and camera preview Effect measurement and special parameters From the MS3006 model onwards, the devices also support the analysis of special effect parameters such as: Sparkle Grade (SG) Diffuse Coarseness (DC) Colour Variation (CV) Flop Index This allows metallic and effect surfaces to be characterised precisely not only in terms of colourimetry, but also with regard to gloss, flop and effect behaviour. This is particularly important for automotive paints, effect pigments and high-quality design coatings. Special features The MS series combines the highest measurement precision with portable flexibility. The industrial MCU platform and the high-quality optical system ensure excellent repeatability and reproducibility even under demanding production conditions. The integrated colour camera preview supports precise positioning of the measurement surface and improves process reliability. Professional multi-angle colour measurement for the most demanding requirements We would be happy to advise you on selecting the right multi-angle spectrophotometer for your application in the laboratory, production or quality control. Get advice now

The YS series of benchtop spectrophotometers from 3nh enable high-precision colour and transmittance measurements in laboratory and quality control settings. The YS6060, YS6010 and YS6003 models operate using reflective D/8 and transmissive D/0 geometries and are suitable for demanding colour testing in industry, research and development. The YS6002 Colour Haze Meter has been specially developed for transmission and haze measurements. System & Application The YS series instruments are used for precise colour analysis, quality control and material evaluation. Thanks to the combination of high-resolution spectral technology, a large 7" touchscreen and modern CMOS sensor technology, the systems are ideally suited for applications in the plastics, coatings, printing, textile, packaging and glass industries. Measurements can be taken in either reflection or transmission mode with SCI/SCE support. Model variants YS6060: Benchtop spectrophotometer with reflective D/8 and transmissive D/0 geometry, four measurement apertures: Ø25.4 mm + Ø15 mm + Ø8 mm + Ø4 mm YS6010: Benchtop spectrophotometer with reflective D/8 and transmissive D/0 geometry, three measurement apertures: Ø25.4 mm + Ø8 mm + Ø4 mm YS6003: Benchtop spectrophotometer with reflective D/8 and transmissive D/0 geometry, three measurement apertures: Ø25.4 mm + Ø8 mm + Ø4 mm YS6002: Benchtop colour haze meter for transmission and haze measurements with D/0 geometry and single measuring aperture Ø25.4 mm Technical specifications Measurement geometry: Reflective D/8, Transmissive D/0 Measurement modes: SCI / SCE Wavelength range: 360–780 nm Light source: Combined LED and UV light source Sensor: Dual-array CMOS image sensor Screen: 7" TFT touchscreen Data interfaces: USB, some models Bluetooth Colour models: CIE Lab, XYZ, Yxy, LCh, HunterLab, sRGB and many more Measuring apertures: depending on model Ø25.4 mm / Ø15 mm / Ø8 mm / Ø4 mm Applications: Laboratory, research, quality assurance and industrial colour measurement Assistance with selection We are happy to assist you in selecting the right spectrophotometer or colour haze meter for your application and your colour and quality control requirements. Get advice now

The YH series colour haze meters have been developed for high-precision measurements of haze, transmittance and colour in transparent and translucent materials. The YH1810, YH1610 and YH1210 models enable reliable measurements in accordance with ASTM and ISO standards and are ideal for laboratory, quality control and industrial production environments. Thanks to the open measuring chamber, a wide variety of sample formats can be measured flexibly in either a horizontal or vertical orientation. Applications The YH series instruments are used to analyse haze, light transmission and colour data in glass, plastics, films, packaging materials, displays, liquids and transparent materials. They are particularly suitable for quality control, material development, research and production monitoring in the plastics, packaging, glass and electronics industries. Model variants Color Haze Meter YH1810 Geometry: 0/D Measurement apertures: Ø20 mm / Ø15 mm / Ø8 mm / Ø4 mm With Bluetooth connectivity Additional clarity/definition measurement for high-precision transparency analysis Colour Haze Meter YH1610 Geometry: 0/D Measurement apertures: Ø20 mm / Ø15 mm / Ø8 mm / Ø4 mm With Bluetooth connectivity Advanced colour and transmittance analysis with spectral data output Haze Meter YH1210 Geometry: 0/D Measurement apertures: Ø20 mm / Ø15 mm / Ø8 mm / Ø4 mm Precise haze and transmittance measurement in accordance with ASTM and ISO standards Technical highlights Measurement geometry: 0/D (parallel illumination, diffuse detection) Standards: ASTM D1003/1044, ISO 13468, ISO 14782, JIS K7105 and many more Transmission measurement range: 0–100% Measurement apertures: Ø20 mm / Ø15 mm / Ø8 mm / Ø4 mm Integrating sphere: Ø154 mm Light source: 400–700 nm full-spectrum LED light source Sensor technology: PD array or 256-pixel CMOS dual-array sensor depending on model Display: 7" TFT colour touchscreen Measurement time: approx. 1.5 seconds Interfaces: USB, print serial, Bluetooth (depending on model) Data storage: up to 30,000 measurement values Quality and data management software included Colour and transparency analysis The YH1610 and YH1810 models also enable comprehensive colour measurements and spectral analyses of transparent materials. The following colour models and evaluations are supported, amongst others: CIE LAB, XYZ, Yxy, LCh, sRGB, βxy ΔE*ab, ΔE94, ΔE00, CMC Whiteness Index (WI) Yellowness Index (YI) Gardner Index Cobalt-Platinum Index Absorbance and clarity measurement Special features The YH series combines precise turbidity and colour measurement with ease of use and high measurement stability. Dynamic light source and temperature sensors continuously monitor ambient conditions and ensure reliable measurement results. The open measurement chamber allows for flexible testing of a wide variety of sample sizes and material forms. Selection assistance We are happy to assist you in selecting the right colour or haze meter for your application in quality control, material testing or laboratory analysis. Get advice now

The 45° tilting table for colour inspection booths has been specially developed as an accessory for professional colour light tables and colour inspection booths. The precise 45° tilt ensures standard-compliant viewing conditions for colour comparisons, proofing and quality control. System & Application The 45° tilting table supports ergonomic and standardised viewing of colour samples, print proofs and materials under controlled lighting conditions. The precise viewing angle enables consistent visual colour assessment. The accessory is ideal for applications in the printing, packaging, graphic design, textile, plastics and quality control industries, as well as for professional colour management processes. Technical specifications Model: 45° standard tilting table for colour inspection booths Standard dimensions (L × W × H): 400 × 250 × 248 mm Weight: 2 kg Installation: Flexible positioning and easy removal Compatibility: Suitable for standard colour light boxes Special features Precise 45° viewing angle for standard-compliant colour assessment Optimised viewing conditions for proofs and colour comparisons Flexible positioning within the colour inspection booth Easy to dismantle for transport and storage Lightweight and robust construction Custom colour and size adjustments possible Ideal for professional colour management and quality control processes Professional colour assessment under standardised conditions We are happy to assist you in selecting the right accessories for your colour inspection booth and your colour management application. Get advice now

The YS6020 and YS6080 benchtop spectrophotometers with xenon flash lamps have been developed for high-precision colour and transmittance measurements in laboratory, research and quality control environments. Thanks to the combination of reflective and transmissive measurement technology, the systems are ideal for professional colour analysis, quality control and colour management processes. System & Application The YS series enables high-precision colour and spectral measurements using reflective and transmissive measurement geometries. Both instruments support SCI and SCE measurements including or excluding UV components and are ideally suited for professional laboratory, development and quality management processes. The benchtop spectrophotometers are used in numerous industries, including plastics, coatings, paints, printing, textiles, leather, paper, automotive, electronics, cosmetics, food, as well as research and testing laboratories. Measurement geometry & lighting technology Reflection: d/8° SCI/SCE Transmission: d/0° SCI/SCE Integrating sphere: Φ154 mm Light source: Xenon flash lamp 360–780 nm Spectrophotometric system: Concave grating Sensor: 256-element dual-array CMOS image sensor Technical specifications Models: YS6020 / YS6080 Wavelength range: 360–780 nm Wavelength interval: 10 nm Half-width: 5 nm Reflectance range: 0–200% Display: 7" TFT touchscreen Measurement time: approx. 2.4 seconds Dimensions: 370 × 300 × 200 mm Weight: approx. 9.6 kg Power supply: DC 24 V / 3 A YS6020: UV filter: 400 nm cut-off Data interfaces: USB Data storage: 20,000 samples YS6080: UV filter: 400 nm / 420 nm / 460 nm cut-off Data interfaces: USB, Bluetooth, printer interface Data storage: 40,000 samples Colorimetric functions Supported colour spaces: CIE Lab, XYZ, Yxy, LCh, LUV, HunterLab, Munsell, sRGB, DIN Colour deviations: ΔE*ab, ΔE*94, ΔE*00, CMC, DIN ΔE99 Colorimetric indices: Whiteness, yellowness, metamerism index, colour strength, opacity, haze, Gardner index, APHA/Pt-Co, Saybolt Special features Reflectance and transmittance measurement in a single instrument SCI and SCE measurements including or excluding UV 7" capacitive TFT touchscreen Automatic detection of measurement apertures Temperature sensor for measurement compensation Powerful PC software for colour analysis Large internal data memory High repeatability for precise laboratory applications Ideal for laboratories, research and professional quality control Precise colour measurement technology for laboratories and quality control We are happy to assist you in selecting the right spectrophotometer and the optimal measurement configuration for your application. Get advice now

The TS series of portable benchtop spectrophotometers combine the precision of stationary laboratory instruments with the flexibility of portable measurement systems. The TS8450, TS8280 and TS8210 models have been developed for high-precision colour and quality control in laboratories, production and quality management. Thanks to state-of-the-art CMOS sensor technology, Bluetooth connectivity and a UV light source, the instruments are ideally suited for industrial applications with the highest demands on colour accuracy and repeatability. Areas of application The TS series is suitable for precise colour control and colour communication in numerous industrial sectors such as plastics technology, the printing industry, textile and garment dyeing, ceramics, paints & coatings, electronics, and quality control of fluorescent materials. In addition, certain models can be used for measuring road signs, markings and reflective films. Model variants TS8450 Portable Benchtop Spectrophotometer Geometry: 45/0 Measurement apertures: Ø18 mm / Ø8 mm / Ø4 mm With UV light source and Bluetooth connectivity TS8280 Portable Benchtop Spectrophotometer Geometry: D/8 SCI/SCE Measurement apertures: Ø30 mm / Ø25.4 mm With UV light source and Bluetooth connectivity TS8210 Portable Benchtop Spectrophotometer Geometry: D/8 Measurement apertures: Ø8 mm / Ø4 mm Technical highlights Measurement geometry: 45/0 or D/8 SCI/SCE depending on model Sensors: High-resolution CMOS dual-array sensors Light source: Full-spectrum LED with additional UV light source Wavelength range: 400–700 nm Reflectance measurement range: 0–200% Colour models: CIE Lab, XYZ, Yxy, LCh, HunterLab, DIN Lab99 and many more Colour deviations: ΔE*ab, ΔE00, ΔE94, CMC, etc. Display: 7" TFT touchscreen Interfaces: USB, Bluetooth 5.0 Measurement modes: Single measurement and average measurement Software: SQCX quality management software for colour management and analysis Special features The TS series instruments offer the highest measurement accuracy for laboratory and production environments. The integrated UV light source enables reliable measurements of fluorescent materials. Thanks to Bluetooth and USB connectivity, measurement data can be conveniently transferred and documented. The robust construction and industrial touchscreen ensure comfortable operation in daily use. Personalised advice for your application We are happy to assist you in selecting the right portable benchtop spectrophotometer for your laboratory, production or quality management needs. Get advice now

The YS3000 series of portable spectrophotometers combine precise spectral colour measurement with state-of-the-art optical technology and an ergonomic handheld design. The YS3060, YS3020 and YS3010 models have been developed for professional colour control, colour difference analysis and quality management in industry, laboratories and production. Thanks to D/8 geometry, SCI/SCE technology, planar grating spectroscopy and high-performance CMOS dual sensors, the instruments deliver stable and reproducible measurement results on a wide variety of materials and surfaces. Depending on the model, UV support, Bluetooth communication and various aperture sizes are available for flexible measurement tasks. Applications The YS3000 series is suitable for: The plastics and electronics industries Paints, varnishes and coatings Textile and clothing industry Printing and packaging Ceramics industry Automotive industry Cosmetics and consumer goods Laboratory and research applications Colour matching and quality control Models with a UV light source also enable precise measurements of fluorescent materials, optical brighteners and special effect surfaces. Thanks to various aperture sizes, both large areas and small or textured areas can be analysed with precision. Model overview YS3060 Portable Spectrophotometer D/8 geometry with SCI/SCE technology Integrated UV light source Bluetooth 4.0 + USB communication Dual aperture: Ø8 mm / Ø10 mm and Ø4 mm / Ø5 mm Spectral range: 400–700 nm Repeatability: ΔE* ≤ 0.03 Inter-instrument deviation: ΔE* ≤ 0.15 Professional premium instrument for high-precision industrial colour control and fluorescent materials YS3020 Portable Spectrophotometer D/8 geometry with SCI/SCE technology Bluetooth 4.0 + USB communication Customisable apertures: Ø8 mm / Ø4 mm / 1×3 mm Spectral range: 400–700 nm Repeatability: ΔE* ≤ 0.04 Inter-instrument deviation: ΔE* ≤ 0.20 Flexible spectrophotometer for small, structured or complex measurement areas YS3010 Portable Spectrophotometer D/8 geometry with SCI/SCE technology USB communication Single aperture: Ø8 mm / Ø10 mm Spectral range: 400–700 nm Repeatability: ΔE* ≤ 0.06 Inter-instrument deviation: ΔE* ≤ 0.40 Compact and cost-effective solution for professional colour difference control Optical technology and sensor technology The YS3000 series utilises modern planar grating spectroscopy combined with high-performance 256-element dual-array CMOS sensors. This ensures stable and reproducible measurement results with high accuracy and long-term stability. Technical features: D/8 diffuse illumination with 8° viewing angle SCI/SCE synchronous measurement Full-spectrum LED light source Optional additional UV light source Concave grating spectroscopy 256-element dual-array CMOS sensor Integrating sphere Ø48 mm Measurement range (reflectance): 0–200% Measurement time approx. 2.6 seconds Capacitive 3.5" TFT colour display Camera positioning system ETC real-time calibration Multiple apertures and flexible measurement The different aperture variants allow flexible adaptation to various sample sizes and surface structures. This enables precise analysis of both large areas and small or textured measurement areas. The models with small apertures are particularly suitable for: narrow printed elements textiles small plastic parts textured surfaces edge areas Laboratory samples with a limited measurement area Colorimetric functions The instruments support comprehensive colour and quality analyses: CIE LAB XYZ Yxy LCh CIE LUV Hunter LAB CIE RGB Supported colour difference formulas: ΔE*ab ΔE*uv ΔE94 ΔEcmc ΔE00 ΔE(Hunter) Additional analysis functions: Whiteness Index (WI) Yellowness Index (YI) Tint Index (TI) Metamerism Index (MI) Colour Strength Opacity Colour Fastness Staining Fastness 8° Gloss Software and Data Management The YS3000 series supports professional colour management and quality control via PC software, as well as Bluetooth and USB communication. Functions: Colour difference analysis PASS/FAIL evaluation Spectral diagrams Colour matching support Measurement reports Quality reports Colour comparison and archiving Data storage: Up to 2,000 standard data points Up to 20,000 measurement data points Special features The devices feature an ergonomic handheld design with a capacitive touchscreen and integrated camera positioning. Automatic real-time calibration ensures stable measurement results and reduces operator error. The long-lasting full-spectrum LED light sources can perform more than 3 million measurements or last for approximately 5 years. The lithium-ion batteries allow for up to 5,000 measurements within 8 hours. The YS3060 and YS3020 models also support Bluetooth communication for modern mobile colour management and wireless data transfer. Selection assistance We are happy to assist you in selecting the right portable spectrophotometer for your application in the laboratory, production, quality control or colour management. Get advice now

The TS8500 series benchtop grating spectrophotometers have been developed for high-precision colour, reflectance, transmittance and haze measurements in the laboratory and in industrial quality control processes. The TS8500, TS8510, TS8520 and TS8560 combine state-of-the-art CMOS sensor technology, SCI/SCE synchronous measurement and a powerful colour management system to ensure maximum measurement accuracy and repeatability. Thanks to the combination of D/8 reflection geometry and D/0 transmission measurement, the systems are ideally suited for demanding applications in research, production and quality management. Applications The TS8500 series is used for colour and quality control of paints, varnishes, plastics, textiles, printed materials, packaging, films, liquids and transparent materials. Thanks to SCI/SCE technology and UV support, the instruments are particularly suitable for fluorescent materials, effect paints and high-precision laboratory analyses. Model variants TS8500 Benchtop Spectrophotometer Pulsed Xenon Lamp + LED light source Reflection: D/8 | Transmission: D/0 Chromatic repeatability: ΔE*ab ≤ 0.015 Inter-instrument deviation: ΔE*ab ≤ 0.20 TS8510 Benchtop Spectrophotometer LED light source Reflection: D/8 | Transmission: D/0 Chromatic repeatability: ΔE*ab ≤ 0.015 Inter-instrument deviation: ΔE*ab ≤ 0.15 TS8520 Benchtop Spectrophotometer LED light source Reflection: D/8 | Transmission: D/0 Chromatic repeatability: ΔE*ab ≤ 0.014 Inter-instrument deviation: ΔE*ab ≤ 0.14 TS8560 Benchtop Spectrophotometer Pulsed Xenon Lamp + LED light source Reflection: D/8 | Transmission: D/0 Chromatic repeatability: ΔE*ab ≤ 0.010 Inter-instrument deviation: ΔE*ab ≤ 0.10 Technical Highlights Measurement geometry: D/8 reflection and D/0 transmission SCI/SCE simultaneous measurement with UV support Wavelength range: 360–780 nm Sensor technology: 256-pixel CMOS dual-array sensor Spectral resolution: 10 nm Half-width: 5 nm Reflectance measurement range: 0–200 % Measurement apertures: Ø25.4 mm / Ø15 mm / Ø8 mm / Ø4 mm Integrating sphere: Ø154 mm Display: 10.5" rotatable touchscreen Data storage: over 100,000 measurements Interfaces: USB & Bluetooth 5.0 Measurement modes: SCI/SCE, haze, transmission and liquid analysis Colour and analysis functions The TS8500 series supports comprehensive colour and quality analysis with over 40 measurement indices and numerous light types. Supported formats include: CIE LAB, XYZ, Yxy, LCh, HunterLab, DIN Lab99 ΔE*ab, ΔE94, ΔE00, DINΔE99, Hunter ΔE Whiteness Index (WI) Yellowness Index (YI) Gardner Index APHA/Hazen/Pt-Co Index Haze and transmission measurement Colour Density CMYK Opacity, Gloss and Metamerism Index Special features The instruments feature automatic temperature and humidity compensation to ensure highly accurate measurement results. The integrated camera enables precise positioning of the measurement surface in real time. The open transmission chamber allows even larger or thicker samples to be analysed flexibly. The combination of xenon and LED light sources in the TS8500 and TS8560 models further improves the detection of fluorescent materials. Selection guidance We are happy to assist you in selecting the right benchtop spectrophotometer for your application in laboratories, research, production or quality control. Get advice now

The YT8200, YT8300 and YT8500 three-angle glossmeters with touchscreens are professional split-type dual-use instruments designed for fast and precise non-destructive coating thickness measurement on metallic substrates. Thanks to their external probe, these instruments are particularly suitable for hard-to-reach measurement points and flexible industrial applications. The instruments combine magnetic induction and eddy current measurement in a compact testing system, enabling reliable measurements on both magnetic and non-magnetic metals. This makes the instruments ideal for measuring paints, powder coatings, electroplated layers, galvanised coatings, chrome layers, as well as protective and insulating coatings. The models differ mainly in their maximum measurement range: YT8200: 0–2000 µm YT8300: 0–3000 µm YT8500: 0–5000 µm Split-type dual-use measuring system The external probe enables convenient and precise measurements even in hard-to-reach places, on small components or complex geometries. Thanks to automatic substrate detection, the appropriate measurement method is selected automatically: Magnetic induction for ferromagnetic substrates such as steel Eddy current method for non-magnetic metals such as aluminium or stainless steel The non-destructive measurement does not damage either the coating or the workpiece and is ideal for quality control and production measurements. Precise coating thickness measurement The YT8 series instruments enable precise measurements of a wide variety of coatings: Paints Powder coatings Galvanised coatings Electroplated coatings Chrome and copper layers Protective and insulating coatings Ceramic and porcelain coatings Various calibration methods, such as zero-point, single-point and multi-point calibration, ensure high repeatability and stable measurement results, even in demanding applications. Modern features and functions The YT8 series offers numerous functions for professional industrial measurement tasks: Wide measuring range up to 5000 µm External, highly sensitive precision probe Automatic material recognition Non-destructive measurement IPS colour display Multiple measurement modes Continuous measurement Statistical and quality control functions Internal data storage USB and, in some cases, Bluetooth interface Compact and robust design The devices support rapid serial measurements and are suitable for both mobile applications and industrial quality control. Typical applications The YT8 series split-type goniometer glossmeters with touchscreens are suitable for: Automotive industry Mechanical engineering Metalworking Corrosion protection Electroplating plants Surface technology Paint and powder coating systems Incoming goods inspection Industrial quality control Production monitoring Thanks to the flexible external probe, the devices are particularly suitable for measurements on complex workpieces, pipes, small components and hard-to-reach surfaces. Assistance with selection We are happy to assist you in selecting the right split-type triangular gloss meter with touchscreens for your application and your required measurement range. Get advice now

The YG60L online gloss meter has been specially developed for non-contact gloss measurement in automated production lines. Thanks to its innovative non-contact technology, the device is ideal for sensitive, liquid or fragile materials and enables precise, real-time quality control directly within the production process. The system combines fast measurement speed, high repeatability and professional quality management functions with an open interface architecture for integration into industrial automation systems. Product overview YG60L Online Non-contact Gloss Meter 60° online gloss measurement Non-contact measurement Basic Measuring Mode GQC6 Quality Management Software For automated production lines and in-line quality control Non-contact measurement technology The YG60L utilises innovative non-contact measurement technology. Measurements are taken at a distance of: 10 mm ±0.1 mm This makes the device ideal for: Liquids Pastes and sauces Powders delicate surfaces Fragile materials Freshly coated products automated production processes Non-contact measurement prevents damage to the surface whilst delivering stable and highly accurate measurement results. Inline and real-time quality control The device has been specially developed for use in automated production lines. Thanks to the compact sensor design, the measuring head can be flexibly integrated into existing systems. Typical applications: Paints and coatings Printing industry Paper industry Plastics industry Electronic surfaces Furniture industry Ceramics Electroplating Metal surfaces Marble and natural stone The open data interface enables: System integration Automation integration Production monitoring Online quality control Data exchange with external systems Measurement performance and precision The YG60L operates with a standardised: 60° measurement angle Supported standards: ISO 2813 ASTM D523 GB/T 9754 Technical specifications: Measuring range 0–1000 GU Resolution 0.1 GU Measurement speed up to 0.2 seconds Measurement spot 9 × 15 mm Repeatability: 0–100 GU: ±0.5 GU 100–1000 GU: ±0.5% of the measured value The high measurement stability ensures reliable results even during continuous production. Measurement modes and quality management The device supports several intelligent measurement modes: Basic Mode Statistical Mode Continuous Mode Quality Control Mode QC mode enables: Limit value monitoring PASS/FAIL evaluation Incoming goods inspection Automatic quality assessment Continuous Mode is ideal for: continuous production monitoring Inline measurements automated process control Software and system integration The YG60L is supplied with the professional GQC6 quality management software. Software functions: Measurement data management Test reports Data analysis Quality documentation PC connection Production analysis Report generation The device also supports: USB communication Bluetooth 5.0 Custom software adaptations custom interface integration The open communication interfaces enable flexible integration into existing industrial and automation systems. Compact industrial design The compact sensor design allows for easy installation in production environments. Technical specifications: Dimensions 140 × 83 × 38 mm Weight approx. 500 g USB power supply 2.3-inch display Multilingual user interface The robust design is suitable for both laboratory environments and continuous industrial operation. In-line gloss measurement for modern production lines We would be happy to advise you on selecting the right solution for automated gloss measurement, inline quality control and industrial surface analysis. Get advice now

The CR-series portable SpectroColorReaders combine a spectrophotometer and intelligent smartphone colour management in a compact, mobile measuring device. The CR7, CR8 and CR9 models combine modern grating spectroscopy, D/8 geometry and high-performance silicon photodiode arrays for precise and reproducible colour measurements in industry, laboratories and quality management. The devices have been specially developed for professional colour control, colour difference analysis and colour management. With Bluetooth connectivity, touchscreen operation and app integration, the CR models enable modern mobile colour communication and cloud-based colour management directly on site. Model overview CR7 SpectroColorReader – Basic Edition D/8 geometry with SCI measurement Single aperture Ø8 mm Dual 24-sensor array Repeatability ΔE*ab ≤ 0.1 Fixed focus positioning Bluetooth app support Ideal for mobile colour control and basic quality checks CR8 SpectroColorReader – Professional Edition D/8 geometry with SCI measurement Selectable apertures Ø8 mm or Ø4 mm Dual 32-sensor array Repeatability ΔE*ab ≤ 0.04 Bluetooth 5.0 + USB Mass storage and cloud colour management Professional colour difference control and industrial colour management CR9 SpectroColorReader – Advanced Edition D/8 geometry with SCI/SCE technology Dual apertures Ø8 mm + Ø4 mm Dual 32-sensor array Repeatability ΔE*ab ≤ 0.03 Integrated camera positioning Integrated UV light source Bluetooth 5.0 + USB High-end solution for professional colorimetry and demanding industrial applications Optical technology and sensor technology All devices in the CR series utilise modern planar grating spectroscopy and diffuse D/8 geometry in accordance with international standards: CIE No. 15 GB/T 3978 ISO 7724-1 ASTM E1164 DIN 5033 Part 7 Technical characteristics: D/8 diffuse illumination with 8° viewing angle Full-spectrum LED light source Planar grating spectroscopy Silicon photodiode arrays Integrating sphere Ø40 mm Capacitive 3.5" TFT touchscreen Measurement time approx. 1.5 seconds The high-performance sensor arrays ensure: high measurement accuracy consistent reproducibility improved light sensitivity high long-term stability precise colour difference analysis SCI/SCE technology The CR7 and CR8 models operate using SCI (Specular Component Included) measurement. The CR9 model also supports SCI/SCE technology. This allows the CR9 to: Include or exclude specular components reduce surface effects enable more objective colour assessments analyse textured materials more precisely This technology is particularly suitable for: Plastics Paints Coatings Textiles Printed products Special effect surfaces Flexible measurement apertures The various aperture options enable flexible measurements on a wide variety of samples and surfaces. CR7 Ø8 mm aperture CR8 Choice of Ø8 mm or Ø4 mm CR9 Dual aperture Ø8 mm + Ø4 mm The small apertures are particularly suitable for: small components textured surfaces textiles edge areas narrow print elements Camera positioning and focus The CR9 model features integrated camera positioning for precise target acquisition. The camera enables the measurement area to be aligned accurately in real time. This reduces: measurement errors are reduced Small measurement areas are captured precisely Increased measurement speed improved repeatability of results The CR7 and CR8 feature stabilised focus positioning for reliable routine applications. Colour spaces and colour metrics Supported colour spaces: CIE LAB XYZ Yxy LCh CIE LUV sRGB DIN Lab99 Munsell Supported colour difference formulas: ΔE*ab ΔE*uv ΔE94 ΔE00 ΔEcmc DINΔE99 Additional colour metrics for CR8 and CR9: Whiteness Index Yellowness Index Metamerism Index Colour Fastness Staining Fastness Opacity Colour Card Search Bluetooth app and cloud colour management All models support modern mobile colour management via Bluetooth and a smartphone app. APP features: Colour card search Cloud colour management Colour difference analysis PASS/FAIL evaluation Colour comparison Measurement data analysis Creation of custom colour databases With the app, users can: Save colour inspirations Archive colour data Find similar colour charts Communicate colour information on the go Data storage and communication CR7 500 standards 10,000 measured values USB charging function CR8 500 standards 10,000 readings Bluetooth 5.0 + USB APP mass storage CR9 1,000 standards 30,000 readings Bluetooth 5.0 + USB APP mass storage Applications The CR series is suitable for: Plastics industry Electronics industry Paints and coatings Printing industry Textiles and dyeing Ceramics industry Paper industry Automotive industry Cosmetics industry Food industry Typical applications: Mobile quality control Colour difference analysis Incoming goods inspection Production monitoring Design and colour development Colour management Colour communication Ergonomics and mobility The devices have been specially developed for mobile industrial applications and offer: ergonomic handheld design capacitive touchscreen low weight of approx. 460 g lithium-ion battery up to 6,000 measurements per charge The full-spectrum LED light source enables: over 3 million measurements long service life high long-term stability Mobile spectral colour measurement and intelligent colour management We are happy to assist you in selecting the right SpectroColorReader model for quality control, colour management and professional mobile colour analysis. Get advice now

The PS2000 series of spectrocolorimeters from 3nh has been developed for precise colour measurement, colour difference analysis and industrial quality control. The instruments combine the portability of a handheld colorimeter with spectral measurement technology and are suitable for reproducible measurements in laboratories, production environments and incoming goods inspection. All models operate with D/8 measurement geometry and support SCI/SCE measurements. This allows colours to be evaluated both with and without the gloss component included. Depending on the model, different apertures are available, enabling reliable measurement of both larger standard surfaces and small, textured or hard-to-access samples. Applications The PS2000 series is suitable for colour difference control in plastics processing, the paint and coatings industry, printing, the textile and clothing industry, ceramics, packaging, electronics, powder materials, and general production and laboratory processes. The models with UV functionality are particularly suitable for fluorescent materials, optical brighteners, textiles, paper, plastics and samples where UV components influence the measurement result. Model overview PS2010: D/8, SCI/SCE, single aperture Ø8 mm, repeatability ΔE*ab ≤ 0.04 PS2020: D/8, SCI/SCE, single aperture Ø4 mm, repeatability ΔE*ab ≤ 0.04 PS2030: D/8, SCI/SCE, MAV Ø8 mm / Ø10 mm, repeatability ΔE*ab ≤ 0.035 PS2040: D/8, SCI/SCE, SAV Ø4 mm / Ø5 mm, repeatability ΔE*ab ≤ 0.035 PS2050: D/8, SCI/SCE, UV switchable on/off, MAV Ø8 mm / Ø10 mm and SAV Ø4 mm / Ø5 mm, repeatability ΔE*ab ≤ 0.03 PS2060: D/8, SCI/SCE, UV on/off, MAV Ø8 mm, SAV Ø4 mm and LAV 1 × 3 mm, repeatability ΔE*ab ≤ 0.03 PS2070: D/8, SCI/SCE, switchable UV, MAV Ø8 mm / Ø10 mm and SAV Ø4 mm / Ø5 mm, repeatability ΔE*ab ≤ 0.02 PS2080: D/8, SCI/SCE, UV on/off, MAV Ø8 mm / Ø10 mm, SAV Ø4 mm / Ø5 mm and LAV 1 × 3 mm, repeatability ΔE*ab ≤ 0.02 Technical specifications Measurement geometry: D/8, diffuse illumination with 8° viewing angle Measurement modes: SCI, SCE and simultaneous SCI/SCE measurement Light source: combined full-spectrum LED light source Sensors: dual-path spectral sensor / CMOS sensor technology Apertures: depending on model, Ø8 mm, Ø10 mm, Ø4 mm, Ø5 mm and 1 × 3 mm Repeatability: up to ΔE*ab ≤ 0.02 depending on model Observer angle: 2° / 10° Operation: colour display with touch control Data transfer: USB connection, with advanced data management depending on model Accessories: optional micro-printer, powder measurement box and calibration accessories Colorimetric functions The devices support numerous colour spaces and colour difference formulas for professional quality control. These include, amongst others, CIE LAB, XYZ, Yxy, LCh, sRGB, Munsell and CMYK. Common formulas such as ΔE*ab, ΔE94, ΔE00 and other industrial evaluations are available for assessing colour differences. In addition, parameters such as whiteness, yellowness, colour strength, opacity and colour simulation can be used for quality decisions. Advantages in daily use The PS2000 series is designed for fast measurement sequences, simple operation and stable measurement results. The instruments are suitable for both horizontal and vertical measurements and can be used directly in production on components, surfaces, textiles, powders or print samples. Thanks to the different aperture variants, the appropriate model can be precisely adapted to the sample size and surface structure. Models with small apertures are particularly suitable for narrow, small or complex-shaped samples. Models with multiple apertures offer greater flexibility for varying materials. The UV models in the higher-end series also enable reliable measurements on fluorescent samples and optically brightened materials. Selection guidance We are happy to assist you in selecting the right spectrocolorimeter for your application in the laboratory, production or quality control. Get advice now

The TS7000 series of handheld spectrophotometers has been developed for high-precision mobile colour measurement and professional quality control. The TS7708, TS7700 and TS7600 models combine state-of-the-art spectral technology, D/8 geometry, SCI/SCE measurement and powerful colour management functions in an ergonomic handheld device. With various aperture sizes, UV support and integrated camera positioning, the devices are ideal for use in laboratories, production, goods receipt and industrial colour communication. The TS series enables reproducible colour and spectral measurements on a wide variety of materials and surfaces. Thanks to the combination of full-spectrum LED technology, planar grating spectroscopy and high-resolution CMOS sensors, the devices deliver stable and precise measurement results even under demanding production conditions. Applications The TS7000 series handheld spectrophotometers are suitable for: Plastics and injection moulding industry Paints, varnishes and coatings Textile and clothing industry Printing and packaging Ceramics and building materials Electronics and consumer goods Cosmetics and food industry Laboratory and research applications Colour approval and production control The UV models also enable precise measurements of fluorescent materials, optical brighteners and special effect surfaces. Thanks to multiple aperture sizes, both large areas and small, narrow or textured areas can be analysed with precision. Model overview TS7708 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement UV light source included Bluetooth and USB data transfer Measurement apertures: Ø8 mm / Ø4 mm / Ø1×3 mm Repeatability: ΔE*ab ≤ 0.03 Inter-instrument deviation: ΔE*ab ≤ 0.15 Particularly suitable for small or complex measurement areas and fluorescent materials TS7700 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement UV light source included Bluetooth and USB data transfer Measurement apertures: Ø8 mm / Ø4 mm Repeatability: ΔE*ab ≤ 0.02 Inter-instrument deviation: ΔE*ab ≤ 0.15 Professional multi-aperture device for precise colour control in the laboratory and production TS7600 Handheld Spectrophotometer D/8 geometry with SCI/SCE measurement Full-spectrum LED light source without UV USB data transfer Selectable single aperture: Ø8 mm or Ø4 mm Repeatability: ΔE*ab ≤ 0.04 Inter-instrument deviation: ΔE*ab ≤ 0.20 Compact and cost-effective solution for mobile colour control Optical technologies and measurement system The TS7000 series instruments utilise modern planar grating spectroscopy and large-area silicon photodiode arrays. This generates high-precision spectral and colour data with excellent repeatability. Technical features: D/8 diffuse illumination with an 8° viewing angle SCI/SCE synchronous measurement Full-spectrum LED light source Some models feature an additional UV light source Planar grating spectroscopy Dual optical path system Large-area dual-row sensors with 40 groups Wavelength range 400–700 nm Wavelength interval 10 nm Reflection measurement range 0–200% Measurement time approx. 1.5 seconds 3.5" TFT colour touchscreen Camera positioning and cross-stabiliser positioning Multiple apertures and flexible measurement The TS7700 and TS7708 models feature multiple aperture sizes for maximum flexibility with different surfaces and sample sizes. Flat and pointed apertures enable precise measurements on: flat surfaces curved components small printed elements textiles powders textured materials narrow lines or edges The TS7708’s 1×3 mm aperture is particularly suitable for narrow print areas, small components or special applications with a limited measurement area. Colorimetric functions The instruments support comprehensive colour and quality analyses: CIE LAB XYZ Yxy LCh CIE LUV HunterLab DIN Lab99 sRGB Munsell CMYK colour density Supported colour difference formulas: ΔE*ab ΔE94 ΔE00 ΔEcmc DINΔE99 ΔE(Hunter) Additional analysis functions: Whiteness Index (WI) Yellowness Index (YI) Metamerism Index Colour Strength Opacity Colour Fastness Staining Fastness 8° Gloss 555 Tone Classification Data Management and Software The TS7000 series supports professional colour management and quality documentation via: Windows PC software Bluetooth data transfer USB interface App and cloud functions depending on the model Features: Colour comparison and PASS/FAIL assessment Spectral analysis Generation of test reports Cloud-based data storage Colour matching support Colour formula management Data export and quality documentation Special features The devices have been specially developed for mobile and industrial use. Thanks to their ergonomic design, robust housing and high-performance lithium-ion batteries, the devices are ideal for use in laboratories, production environments and in the field. Automatic white calibration ensures stable measurement results and reduces operator errors. The integrated camera positioning further improves accuracy on small or complex measurement surfaces. SCI/SCE technology also allows glossy surfaces and textured materials to be reliably assessed. Help with selection We are happy to assist you in selecting the right handheld spectrophotometer for your application in the laboratory, production, quality control or colour management. Get advice now

The P60+ colour inspection booth has been developed for professional colour assessment under standardised lighting conditions. With a total of six integrated standard illuminants, the system enables precise and reproducible assessment of colours, surfaces and materials, as well as reliable detection of metamerism effects. The colour inspection booth is ideally suited for applications in the textile, printing, plastics, coatings, leather, packaging, ceramics and automotive industries, as well as for laboratory and quality control environments. Light sources & application D65 – International standard for artificial daylight for general colour evaluation, 6500 K, 18 W TL84 – Retail lighting for Europe, Japan and China, 4000 K, 18 W CWF – Cool white fluorescent light according to American standard, 4150 K, 18 W F – Warm incandescent light for simulating indoor and evening light, 2700 K, 40 W UV – Ultraviolet light for detecting fluorescent materials and optical brighteners, 365 nm, 20 W TL83 – Warm white fluorescent light according to European standard, 3000 K, 18 W Features The P60+ colour inspection booth provides constant and standard-compliant lighting conditions for reliable colour comparisons. The neutral grey interior minimises distracting reflections and facilitates objective colour assessment. The individual light sources can be conveniently activated via separate switches. Additionally, the system features an operating hours counter to monitor lamp life and supports rapid light changes without flickering or warm-up time. Technical data Model: P60+ Colour Inspection Booth Light sources: D65, TL84, F, UV, CWF, TL83 External dimensions: 695 × 552 × 502 mm Internal dimensions: 665 × 490 × 360 mm Voltage: 220 V Standards: ASTM D1729, ISO 3664, DIN, ANSI, BSI Interior colour: Neutral grey Applications: Colour testing, quality control, material comparison, metamerism testing Product selection support We are happy to assist you in selecting the right colour testing booth and lighting configuration for your application and testing requirements. Get advice now

The T60(4) colour inspection booth with 4 light sources enables precise visual colour assessment under standardised lighting conditions. It is ideally suited for applications in the printing, textile, plastics, automotive and packaging industries. System & Application The colour inspection booth simulates various standardised light types for the reliable assessment of colour deviations and metamerism effects. The uniform illumination enables reproducible results in visual quality control. Light sources D65 – Standard daylight TL84 – Retail lighting (Europe/Asia) F – Warm light / Sunset light UV – UV light for testing fluorescent materials Technical specifications Model: T60(4) Number of light sources: 4 Dimensions (W × D × H): 710 × 405 × 570 mm Internal dimensions: 680 × 385 × 355 mm Voltage: 220 V Weight: 28 kg Special features Precise colour assessment under standardised conditions Detection of metamerism using multiple light sources Separate switches for each light type Automatic switching between light sources No warm-up time required Low heat generation and energy-efficient operation Operating hours counter for lamp monitoring Assistance with selection We are happy to assist you in selecting the right colour inspection booth and light source configuration for your application. Get advice now

The YL series of non-contact benchtop spectrophotometers enable high-precision colour and reflectance measurements without direct contact with the sample. The YL4668, YL4660, YL4560 and YL4520 models have been specially developed for automated production lines, laboratory applications and sensitive or liquid samples. Contactless measurement prevents cross-contamination and reliably protects sensitive materials. System & Application The YL series is ideal for the precise colour analysis of liquids, pastes, powders, plastics, paints, printing materials, ceramics, as well as food and cosmetic products. The instruments utilise high-resolution CMOS sensor technology and a state-of-the-art grating spectrometer system for reliable quality control in laboratories, research and automated production. Thanks to non-contact measurement, even sensitive or hygiene-critical materials can be analysed safely. Model variants YL4668 (Integration Edition): Non-contact benchtop spectrophotometer with D/8 geometry, measurement aperture Ø20 mm (adjustable), measurement distance 7.5 mm, manual and automatic height adjustment YL4660 (Integration Edition): Non-contact benchtop spectrophotometer with D/8 geometry, measurement aperture Ø20 mm, measurement distance 7.5 mm, manual height adjustment YL4560: Non-contact benchtop spectrophotometer with 45/0 geometry, measurement aperture Ø20 mm (adjustable), measurement distance 7.5 mm, manual and automatic height adjustment YL4520: Non-contact benchtop spectrophotometer with 45/0 geometry, measurement aperture Ø20 mm, measurement distance 7.5 mm, manual height adjustment Technical specifications Measurement geometry: D/8 or 45/0 depending on model Measurement principle: Non-contact colour measurement Measurement distance: 7.5 mm Measurement aperture: Ø20 mm, partially customisable Sensor: Dual-array CMOS image sensor with 256 pixels Light source: Full-spectrum LED, some models with UV light source Wavelength range: 400–700 nm Reflectance measurement range: 0–200% Colour models: CIE Lab, XYZ, Yxy, LCh, HunterLab and many more Display: 7" TFT touchscreen Interfaces: USB, RS-232, some models with Bluetooth Applications: Laboratory, quality control, production lines and research Assistance with selection We are happy to assist you in selecting the right non-contact spectrophotometer for your application, production line or laboratory environment. Get advice now

The P120 colour inspection booth with 6 light sources is designed for professional visual colour assessment under standardised lighting conditions. With its spacious inspection chamber, it is particularly suitable for larger samples and applications in the printing, textile, plastics, coatings, automotive and packaging industries. System & Application The P120 colour inspection booth enables reliable inspection of colour deviations and metamerism effects under consistent lighting conditions. It supports reproducible visual quality control and is suitable for colour-critical decisions in production, laboratories and goods-in departments. Light sources D65 – Standard daylight, 6500 K TL84 – European/Asian retail lighting, 4000 K CWF – Cool white fluorescent light, 4150 K TL83 – European retail lighting, 3000 K F – Warm light / sunset light, 2700 K UV – UV light for testing optical brighteners and fluorescent pigments, 365 nm Technical specifications Model: P120 Light sources: D65, TL84, UV, F, CWF, TL83 Dimensions (W × D × H): 1310 × 600 × 800 mm Internal dimensions (W × D × H): 1280 × 590 × 590 mm Voltage: 220 V Weight: 60 kg Special features 6 different light sources for detecting metamerism Separate switches for each light type Automatic switching between light sources Operating hours counter for monitoring lamp replacement No warm-up time and no flickering Low heat generation and energy-efficient operation Suitable for standard-compliant visual colour assessment Assistance with selection We are happy to assist you in selecting the right colour inspection booth and light source configuration for your application. Get advice now