Mirka - Home | Brands | Mirka® FBS-B | Mirka® FBS-B Cordless Belt Sander 10 mm x 330 mm, max. 12V, boxed
Price excl. VAT
Mirka PBS file belt sander 10NV 10x330mm
Price excl. VAT
Mirka - Home | Brands | Mirka® FBS-B | Mirka® FBS-B Cordless belt sander 13 mm x 457 mm max 12V Box
Price excl. VAT
Mirka PBS file belt sander 13NV 13x457mm
Price excl. VAT
Belt & belt file sanders – continuous removal and targeted detail work
Belt sanders and belt file sanders guide an endless sanding belt over a defined contact area. Wider belt machines and compact belt file sanders differ significantly in access, working width and application focus. Surface work, edges or reworking spot welds therefore require a design suited to the task. Belt dimensions, drive and a suitable abrasive belt range form the basis of selection.
Working width and access to the component
A broad contact area suits different tasks from a narrow sanding arm. On belt file sanders, arm shape, contact roller and adjustment options determine which areas can be reached. Compare the actual available space with machine geometry. A narrower belt is not automatically better when a broad, flat contact surface is needed.
Select belt dimensions and sanding arm together
The machine specifies suitable belt dimensions. Different sanding arms may have their own approvals, so belt length and width must be matched precisely. Check tension, tracking and contact rollers according to the instructions. Observe the belt's direction of travel and do not use damaged belts or belts with unsuitable joints.
Compressed-air or electric drive
For pneumatic versions, the required air delivery, operating pressure and supply quality are decisive. A compressor's tank capacity alone says little about these. Electric and battery-powered versions have different supply requirements. Plan connections and supply lines so the machine can operate according to its technical specifications.
Consider contact area, heat and sparks
A file belt's small contact area enables targeted removal but requires controlled guidance. Belt speed, pressure and dwell time influence processing and heating. For metal work, consider possible sparks and the necessary protective measures. Standard dust extraction cannot be used for hot particles without explicit suitability.
Manufacturers & system selection
- Mirka – Mirka belt file sanders are designed for defined processing tasks with narrow belts. Check belt dimensions and supply specifications for the specific model.
Guides & resources
Frequently asked questions: belt & belt file sanders
Is a belt file sander useful for large surfaces?
It is primarily designed for narrow contact areas and difficult-to-access zones. For large, flat surfaces, machines designed for that purpose are usually more suitable.
What compressor size do I need?
The decisive factors are the air delivery and operating pressure required by the machine manufacturer for the intended use. A general tank volume in litres is insufficient for selection.
Can I swap sanding arms freely?
No. Interchangeable arms must be approved for the exact machine model. Also observe the associated belt dimensions and adjustment instructions.
Customer feedback
Enquire about belt & belt file sanders now
Tell us the material, accessibility and available compressed-air or electrical supply. We will help you choose a suitable belt machine.
Enquire now