Aktionsware

Two paths to perfect results: HVLP and RP®The "extra-economical" SATAjet X 5500 HVLP achieves particularly high transfer rates with its low-pressure technology.The "extra-fast" SATAjet X 5500 RP for maximum working speed with optimised high-pressure technology and low overspray.Both versions are highly flexible, meet the highest standards for painting results and significantly exceed the transfer rates of 65% required by the VOC guideline.Top in all areas of application – SATAjet X 5500SATAjet X 5500 allows you to achieve the highest surface quality: when painting cars, commercial vehicles, furniture, yachts or high-quality industrial parts, for example – with all types of paint.Your SATA dealer or our website will be happy to help you select the right nozzle, whether for base, clear or uni coats: www.sata.com/SATAjetX5500Revolutionary. Economical. Quiet. Logical.The revolutionary nozzle systemSophisticated paint systems and new application recommendations create new possibilities, but also present the user with challenges. With its new X-nozzle system, the SATAjet X 5500 sets a new standard for the future.The nozzle system is simple and logical: the two proven technologies – namely HVLP and RP – remain.For each of them, there are "I" and "O" nozzle sets.With increasing nozzle size in the respective technology (HVLP/RP) and spray pattern ("I" or "O"), the material ejection also increases constantly – this means that the respective spray height and width remain the same over the entire spectrum. This provides the user with a transparent and logical system that gives them clear and structured decision-making options.The "I" nozzles have an elongated spray pattern with a short run-out zone and a drier spray core, which is ideal for lower application speeds and offers maximum control when painting. The layer thickness per spray pass is slightly lower for the same nozzle size compared to an "O" nozzle.Stretched fan shape with little run-out zoneImproved control during applicationReduced layer application per spray pass compared to the previous or "O" nozzle The "O" nozzles have an oval spray pattern with a larger run-out zone and a wet spray core, which is suitable for higher application speeds but offers slightly less control when painting. The layer thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.Oval fan shape with larger run-out zoneWet spray core for a higher working speedSlightly higher layer application per spray pass than with the "I" nozzleAdvantagesRevolutionary: the atomisation of the X-nozzles sets new standardsNoticeably quieter: optimised flow geometry of the Whisper Nozzle™ reduces noise in the relevant frequency rangesIndividual: Suitable for every application requirement, such as the properties of the paint system, climatic conditions or painting habits (working speed/control)Precise: Optimised material distribution for a more even and finer atomisation in both spray variantsLow maintenance: No air distribution ring required, thus enabling easier and faster cleaningLogical: constant spray dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughputEfficient: A considerable amount of material can be saved with the same application methodWhat are the advantages of the X-nozzle system?Depending on the properties of the paint system, the climatic conditions and the painting habits, the painter can select the spray gun with the appropriate nozzle set for his individual requirements. The logical structure of the system makes it easy to make the right decisions to achieve an optimal painting result.What else is new? Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can now be dispensed with. In addition, the noise level of this whisper nozzle has been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting. And best of all: the X-nozzle gun uses less paint!Spray patternsTo achieve an optimal spray pattern without any compromises, many more factors than just ambient temperature and humidity must be considered.The selected paint material with the corresponding additives, the size of the object, the recommended layer thickness, the individual painting habits, such as working speed or control, also play an important role in the selection of a nozzle.SATAjet X 5500, perfect in every detailTo determine the appropriate nozzle, the painter has the following tools at his disposal:SATA website: www.sata.com/SATAjetX5500SATA Spray Finder App: www.sata.com/nozzlefinderSuitable areas of applicationindustrial applicationsCarpentryPainting tradeYacht and boat buildingTechnical Information - RP DownloadsPaint data sheet

SAGOLA 3300 GTO Spray Gun – Professional paint spray gun with high transfer technology for body shops, industry, wood and decor (TECH/HVLP/EVO/EPA/64S/62S)The SAGOLA 3300 GTO is a high-quality, versatile spray gun in the mid-high segment and was developed as a fusion of two proven product lines: the 3300 PRO (industry) and the 4100 GTO (body shop). The result is a spray gun that combines robustness, ergonomics and finish performance in one system – ideal for users who require consistent surface quality and high process reliability in their everyday work.The new forged, anodised aluminium body is deliberately designed to be lightweight yet maximally stable. In combination with the ergonomic handle and stainless steel trigger, the 3300 GTO enables comfortable, fatigue-free working – even during long shifts.At the heart of the system are the high-transfer nozzle sets and the new aluminium air caps (TECH/HVLP/EVO/EPA), which ensure ultra-fine atomisation, large spray patterns and highly controlled spraying behaviour. This reduces overspray, improves material utilisation and ensures a clean, even surface. Depending on the system, the spray gun achieves a product transfer efficiency of at least 65% to 75%.The different systems allow the 3300 GTO to be adapted very precisely to the application: TECH (maximum speed & performance in the body shop), HVLP (maximum savings & minimum mist), EVO (speed & efficiency in industry/wood), EPA (minimum air consumption with very good finishes), and 64S/62S for high-viscosity materials with large nozzle sizes.For many users, the 3300 GTO is also an attractive professional alternative to SATA (and comparable premium spray guns) if they are looking for a spray gun that offers excellent atomisation, high transfer and practical robustness – at a very convincing price-performance ratio and with the option of specifically adjusting the spray behaviour to the material and process using different air cap systems.Particularly practical: the Bodyshop-TECH/HVLP variants feature the RC2 air flow regulator with analogue pressure gauge as a useful setup for setting the working pressure safely and reproducibly (ideal for consistent results).Forged, anodised aluminium body – lightweight, robust, corrosion-protectedHigh transfer system (min. 65–75%) – less overspray, efficient use of materialNew aluminium air caps – ultra-fine atomisation & large spray patterns for high-quality surfacesLow maintenance & durable – simplified design, fewer parts, quick cleaningDetails & information Product features The 3300 GTO was developed for users who want a gun that runs smoothly, can be adjusted quickly and is easy to clean in daily use – without compromising on surface quality.Forged anodised aluminium body – high resistance, corrosion-protected, easy to cleanStainless steel needle & stainless steel nozzle – durable, consistent material flow, stable with changing materialsNew aluminium air caps (TECH/HVLP/EVO/EPA) – optimised aerodynamics for finer atomisation and large spray patternsHigh transfer technology – efficient application, reduced overspray, clean edges and better material utilisationErgonomic design – excellent balance, comfortable handling, reduces fatigue during daily useLow-maintenance design – fewer components and service-friendly construction for quick cleaningSingle-shaft system – simplified mechanics, synchronous behaviour, less maintenanceAutomatic packing / packing gland – precise fit, reduces risk of needle damage, supports clean disassemblyColour identification – quick assignment within the team (e.g. per painter/process/nozzle set)RC2 air flow regulator (Bodyshop TECH/HVLP) – precise pressure control & reproducible results thanks to analogue pressure gaugeAir consumption / fan / spray distance (system comparison):TECH: 290 L/min | 290–300 mm | 18–20 cm (fast, performance-oriented)HVLP: 360 L/min | 290–300 mm | 12–15 cm (max. savings, min. mist)EPA: 240 L/min | 250 mm | max. 18 cm (min. air consumption, very good finishes)EVO: 320 L/min | 280 mm | max. 18 cm (speed & efficiency in industry/wood)Standards & approvals (excerpt): CE, EN 1953, ATEX II 2 GX, SQMDA 1151, SQMDA 1136. Variant overview The SAGOLA 3300 GTO has a modular design: you select the system (air cap) and the appropriate nozzle size (mm) according to the material, desired finish and working style. As a general rule, smaller nozzles are used for finer finishes (clear coat/top coat) and larger nozzles for fillers/primers or high-viscosity products. The following variants correspond exactly to the typical system areas: bodyshop (TECH/HVLP), industry/wood/decor (EVO/EPA/HVLP) and high viscosity (64S/62S). Variant / DesignationDesignSuitable for TECH Air cap & 1.20 mmGTO TECH (body shop – high speed & maximum spray quality)For very fine finishes and controlled application (e.g. clear coat with high quality requirements). TECH air cap & 1.30 mmGTO TECH (body shop)Universal in the bodyshop: clear coat/HS-MS and top coat when a good mix of speed and control is required. TECH air cap & 1.40 mmGTO TECH (body shop)For users who want more material throughput with topcoats/single stage or slightly higher application. HVLP air cap & 1.20 mmGTO HVLP (body shop – max. saving/min. mist)For very fine surfaces with maximum savings and minimal mist – particularly pleasant when working close to the booth. HVLP air cap & 1.30 mmGTO HVLP (body shop)Very balanced – ideal for even application (including water-based base coats). HVLP air cap & 1.40 mmHVLP (industry/wood/decor)For finishes & primers with a focus on material savings and a clean spray pattern. HVLP air cap & 1.60 mmHVLP (industry/wood/decor)For primers/fillers or higher viscosity when more throughput is required – with continued low overspray. HVLP air cap & 1.80 mmHVLP (industrial/wood/decorative)For thicker primers/fillers and higher layer thicknesses – when high application is required. EVO air cap & 1.30 mm3300 EVO (High speed of application / Maximum spray quality)For industrial/wood finishes when high productivity needs to be combined with very good atomisation. EVO air cap & 1.40 mm3300 EVOVery well balanced for top coats/clear coats in industrial and wood applications – good mix of application and finish. EVO air cap & 1.60 mm3300 EVOFor primers/fillers in faster series processes – when throughput and speed are important. EPA air cap & 1.40 mm3300 EPA (min. air consumption / great finishes)For users who want to reduce air consumption while achieving a very good surface finish (e.g. continuous use, energy-efficient operation). EPA air cap & 1.60 mm3300 EPAVery efficient for primers/fillers – when material flow is required but air consumption should remain low. EPA air cap & 1.80 mm3300 EPAFor higher layer thicknesses/more viscous media – with a focus on low air consumption. 64S air cap & 2.20 mm64S (High Viscosity)For highly viscous products when standard nozzles do not provide sufficient throughput and a stable material flow is required. 62S Air Cap & 2.80 mm62S (High Viscosity – maximum flow rate)For very viscous materials and high layer thicknesses – when maximum throughput is required (e.g. wood/industry). Accessories/variants: In addition to air cap and nozzle sizes, we offer matching accessories to optimally tailor the gun to your process – particularly useful for reproducible pressure settings, clean filtration and comfortable handling: RC2 air flow regulator with analogue pressure gauge, 650 ml plastic gravity cup, aluminium gravity cup and mini product filter (pack of 10). Nozzle sets (nozzle + needle) – selection guide The 3300 GTO works with nozzle set kits (nozzle + needle). This ensures that the nozzle and needle are optimally matched, which has a direct impact on atomisation, material flow and surface quality. The right selection helps to prevent runs, reduce mist and build up evenly.1.20 – 1.30 mm: very fine finishes (clear coat, high-quality top coats, clean structure)1.40 mm: universal (top coat, clear coat, solid mix of application & control)1.60 – 1.80 mm: primer/filler, higher viscosity, higher throughput2.20–2.80 mm: high-viscosity products with 64S/62S air caps (maximum material flow)If you can briefly tell me whether it is clear coat, water-based, top coat, filler or a high-viscosity material (and the desired application thickness), I can recommend the right combination of air cap + nozzle size. Tip: HVLP is ideal if you want to save material and minimise overspray. TECH is the choice for maximum speed and very high performance in the body shop. EPA is recommended if air consumption needs to be particularly low, while EVO is often the best mix of speed and finish in the industrial/woodworking sector. Intended use / applications The 3300 GTO is a true all-round system because it covers several application areas. The decisive factor is the combination of air cap (spray behaviour) and nozzle size (material throughput). Body shop/vehicle painting: HS/MS clear coats, single stage, water-based, metallics, silver/pearl (TECH/HVLP)Industry: Topcoats, clear coats, industrial coatings, primers – robust, reproducible, efficient (EVO/EPA/HVLP)Wood & furniture: paints/clear coats, water-based systems, solvent systems – good finishes and high throughput (EVO/EPA)Decoration: very clean finishes with reduced air consumption (EPA)Primers/fillers: larger nozzle sizes for material build-up and uniform layer thicknesses (HVLP/EVO/EPA 1.60–1.80)High-viscosity products: when maximum delivery capacity is required (64S 2.20 / 62S 2.80)Series operation: low-maintenance design & quick cleaning – ideal for daily use The 3300 GTO is particularly useful wherever finish quality, material efficiency and process reliability are required at the same time – from the workshop to industrial series production. Product flyer Further details on the SAGOLA 3300 GTO (systems, technical data, air caps, nozzle kits, accessories and spare parts) can be found in the manufacturer's documentation (brochure). To the 3300 GTO brochure (PDF)

SATAjet 1000 K RP nozzle 1.3 DA-R, round jet, for dispersion adhesives, without regulating elements

SAGOLA 3300 GTO Spray Gun – Professional paint spray gun with high-transfer technology for bodyshops, industry, wood & decor (TECH/HVLP/EVO/EPA/64S/62S)The SAGOLA 3300 GTO is a high-quality, versatile spray gun in the mid-high segment and was developed as a fusion of two proven product lines: the 3300 PRO (industry) and the 4100 GTO (body shop). The result is a spray gun that combines robustness, ergonomics and finish performance in a single system – ideal for users who require consistent surface quality and high process reliability in their daily work.The new forged, anodised aluminium body is specifically designed for low weight whilst ensuring maximum stability. Combined with the ergonomic handle and stainless steel trigger, the 3300 GTO enables comfortable, fatigue-free working – even during long shifts.At the heart of the system are the high-transfer nozzle sets and the new aluminium air caps (TECH/HVLP/EVO/EPA), which ensure ultra-fine atomisation, wide spray patterns and highly controlled spray behaviour. This reduces overspray, improves material utilisation and ensures a clean, uniform finish. Depending on the system, the gun achieves a product transfer efficiency of at least 65% to 75%.Thanks to the different systems, the 3300 GTO can be adapted very precisely to the application: TECH (maximum speed & performance in the bodyshop), HVLP (maximum savings & minimal mist), EVO (speed & efficiency in industry/woodworking), EPA (minimum air consumption with excellent finishes), as well as 64S/62S for high-viscosity materials with large nozzle sizes.For many users, the 3300 GTO is also an attractive professional alternative to SATA (and comparable premium spray guns), when looking for a gun that offers excellent atomisation, high transfer efficiency and practical robustness – with a very convincing price-performance ratio and the ability to tailor the spray pattern to the specific material and process using various air cap systems.Particularly practical: on the Bodyshop-TECH/HVLP variants, the RC2 air flow regulator with analogue pressure gauge is provided as a useful setup for adjusting the working pressure safely and reproducibly (ideal for consistent results).Forged, anodised aluminium body – lightweight, robust, corrosion-resistantHigh-transfer system (min. 65–75%) – less overspray, efficient use of materialNew aluminium air caps – ultra-fine atomisation & large spray patterns for high-quality finishesLow-maintenance & durable – simplified design, fewer parts, quick cleaningDetails & Information Product features The 3300 GTO has been developed for users who want a spray gun for daily use that runs reliably, can be adjusted quickly and is easy to clean – without compromising on surface quality.Body made from forged anodised aluminium – high durability, corrosion-resistant, easy to cleanStainless steel needle & stainless steel nozzle – durable, consistent material flow, stable with changing materialsNew aluminium air caps (TECH/HVLP/EVO/EPA) – optimised aerodynamics for finer atomisation and wide spray patternsHigh-Transfer Technology – efficient application, reduced overspray, clean edges and better material utilisationErgonomic design – excellent balance, comfortable posture, reduces fatigue during daily useLow-maintenance design – fewer components and service-friendly construction for quick cleaningSingle-shaft system – simplified mechanics, synchronised operation, reduced maintenanceAutomatic packing / packing gland – precise fit, reduces the risk of needle damage, facilitates clean disassemblyColour coding (Colour Identifier) – quick identification within the team (e.g. per painter / process / nozzle set)RC2 Airflow Regulator (Bodyshop TECH/HVLP) – precise pressure control & reproducible results via analogue pressure gaugeAir consumption / fan pattern / spray distance (system comparison):TECH: 290 L/min | 290–300 mm | 18–20 cm (fast, performance-oriented)HVLP: 360 L/min | 290–300 mm | 12–15 cm (max. saving, min. mist)EPA: 240 L/min | 250 mm | max. 18 cm (min. air consumption, very good finishes)EVO: 320 L/min | 280 mm | max. 18 cm (speed & efficiency in industry/woodworking)Standards & approvals (excerpt): CE, EN 1953, ATEX II 2 GX, SQMDA 1151, SQMDA 1136. Overview of variants The SAGOLA 3300 GTO has a modular design: you select the system (air cap) and the appropriate nozzle size (mm) based on the material, desired finish and working style. As a general rule: smaller nozzles for finer finishes (clear coat/top coat) and larger nozzles for filler/primer or high-viscosity products. The following variants correspond exactly to the typical system areas: bodyshop (TECH/HVLP), industry/wood/decor (EVO/EPA/HVLP) and high viscosity (64S/62S). Variant / DesignationDesignSuitable for TECH Air Cap & 1.20 mmGTO TECH (Body shop – High speed & Maximum spray quality)For very fine finishes and controlled application (e.g. clear coat for high-quality results). TECH Air Cap & 1.30 mmGTO TECH (Body shop)Universal use in the bodyshop: clear coat/HS-MS and topcoat, when a good balance of speed and control is required. TECH Air Cap & 1.40 mmGTO TECH (Body Shop)For users who want a higher material throughput with topcoats/single-stage systems or slightly higher application rates. HVLP air cap & 1.20 mmGTO HVLP (Body shop – Max. saving / Min. mist)For very fine finishes with maximum savings and minimal mist – particularly pleasant for work carried out near the booth. HVLP air cap & 1.30 mmGTO HVLP (Bodyshop)Very well-balanced – ideal for even application (including water-based base coats). HVLP air cap & 1.40 mmHVLP (Industrial/Wood/Decor)For finishes & primers with a focus on material economy and a clean spray pattern. HVLP air cap & 1.60 mmHVLP (Industrial/Wood/Decor)For primers/fillers or higher viscosity when higher throughput is required – whilst maintaining low overspray. HVLP air cap & 1.80 mmHVLP (Industrial/Wood/Decor)For thicker primers/fillers and higher film thicknesses – when high application rates are required. EVO air cap & 1.30 mm3300 EVO (High application speed / Maximum spray quality)For industrial/wood finishes, where high productivity needs to be combined with excellent atomisation. EVO air cap & 1.40 mm3300 EVOVery well-balanced for topcoats/clear coats in industrial and wood applications – good balance between application and finish. EVO air cap & 1.60 mm3300 EVOFor primers/fillers in faster production runs – when throughput and speed are key. EPA air cap & 1.40 mm3300 EPA (min. air consumption / great finishes)For users who wish to reduce air consumption whilst maintaining an excellent finish (e.g. continuous use, energy-efficient operation). EPA air cap & 1.60 mm3300 EPAHighly efficient for primers/fillers – when material flow is required but air intake should remain low. EPA air cap & 1.80 mm3300 EPAFor higher film thicknesses/more viscous media – with a focus on low air consumption. 64S air cap & 2.20 mm64S (High Viscosity)For high-viscosity products where standard nozzles do not provide sufficient flow rate and a stable material flow is required. 62S air cap & 2.80 mm62S (High Viscosity – maximum flow rate)For very viscous materials and high film thicknesses – where maximum throughput is required (e.g. wood/industrial applications). Accessories/Variants: In addition to air cap and nozzle sizes, we offer suitable accessories to optimally tailor the gun to your process – particularly useful for reproducible pressure settings, clean filtration and comfortable handling: RC2 air flow regulator with analogue pressure gauge, 650 ml plastic gravity cup, aluminium gravity cup and product mini-filters (pack of 10). Nozzle sets (nozzle + needle) – selection guide The 3300 GTO operates with nozzle sets (nozzle + needle). This ensures that the nozzle and needle are optimally matched, which has a direct impact on atomisation, material flow and surface quality. The right selection helps to prevent runs, reduce overspray and build up a uniform finish.1.20 – 1.30 mm: very fine finishes (clear coat, high-quality topcoats, clean texture)1.40 mm: universal (topcoat, clear coat, good balance of application and control)1.60 – 1.80 mm: primers/fillers, higher viscosity, higher throughput2.20 – 2.80 mm: high-viscosity products with 64S/62S air caps (maximum material flow)If you could just let me know whether you’re using clear coat, water-based paint, topcoat, filler or a high-viscosity material (and your desired application thickness), I can recommend the right combination of air cap and nozzle size. Tip: HVLP is ideal if you want to save material and minimise overspray. TECH is the choice for maximum speed and very high performance in the bodyshop. EPA is recommended if air consumption needs to be particularly low, whilst EVO is often the best mix of speed and finish in industrial and woodworking applications. Intended use / Applications The 3300 GTO is a true all-round system because it covers multiple application areas. The decisive factor is the combination of air cap (spray pattern) and nozzle size (material flow rate). Body shop / vehicle painting: HS/MS clear coats, single-stage, water-based, metallics, silver/pearl (TECH/HVLP)Industry: Topcoats, clear coats, industrial paints, primers – robust, reproducible, efficient (EVO/EPA/HVLP)Wood & Furniture: Paints/clear coats, water-based systems, solvent-based systems – good finishes and high throughput (EVO/EPA)Decoration: very clean finishes with reduced air consumption (EPA)Primers/fillers: larger nozzle sizes for material build-up and uniform film thicknesses (HVLP/EVO/EPA 1.60–1.80)High-viscosity products: when maximum flow rate is required (64S 2.20 / 62S 2.80)Series production: low-maintenance design & quick cleaning – ideal for daily use The 3300 GTO is particularly useful wherever finish quality, material efficiency and process reliability are required simultaneously – from the workshop to industrial production. Product flyer Further details on the SAGOLA 3300 GTO (systems, technical data, air caps, nozzle sets, accessories and spare parts) can be found in the manufacturer’s documentation (brochure). To the 3300 GTO brochure (PDF)

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: Gun with 0.6 litre QCC plastic reusable cup without swivel jointSuitable areas of applicationVehicle painting

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: SATAjet 100 B F HVLP nozzle 1.9 RPS multi-purpose cup 0.3 l / 0.6 l / 0.9 l (1x each)Suitable areas of applicationVehicle painting

SAGOLA Classic Pro XD Spray Gun – High-Transfer Gravity-Fed Spray Gun for Automotive, Industrial, Wood & Decorative Applications (21EPA / HVLP / Conventional 25/36/28)The SAGOLA Classic Pro XD is a high-transfer gravity spray gun designed for robustness and versatility – making it a professional solution for automotive, industrial, wood and decorative applications.SAGOLA positions the Classic Pro XD in the mid- to high-range segment, combining high manufacturing standards with competitive prices, excellent service and a 3-year warranty.For many users, the Classic Pro XD is also an attractive professional alternative to SATA (and comparable premium spray guns) when looking for a gun that offers excellent atomisation, high transfer efficiency and practical robustness – with a very good price-performance ratio and a 3-year warranty.The focus is on a modern spray gun with a new body design, improved ergonomics and a very wide range of application solutions. Thanks to the new air caps, the typically high Sagola spray quality and maximum paint transfer, the Classic Pro XD is suitable for both fine finishing work and priming/filler tasks – depending on the air cap and nozzle set selected.A key feature in daily use is the structural separation with no connecting joints between air and material (“No joints between air and paint”). This facilitates cleaning, reduces potential wear and leakage points, and increases process reliability during continuous operation.In addition, the internal air distributor ensures that no loose parts are created which could come loose or wear out over time – a clear advantage for workshops and industrial users who rely on reliable, consistent performance.The Classic Pro XD is also of interest to users working with smaller or mobile compressors: it is specifically designed for use with portable compressors > 2HP and utilises a low-consumption air cap, which is a real practical advantage in many workplaces.New body design – maximum ergonomics and high comfort in daily useNo gaps between air and material – easier to clean, fewer points of failureStainless steel nozzles & stainless steel needles – robust and durableNew air caps (21EPA / HVLP / conventional 25/36/28) – wide range of applications from finish to primerDetails & information Product features The Classic Pro XD is designed for professional everyday use: robust construction, high spray quality, efficient material utilisation and easy maintenance. SAGOLA emphasises the combination of the highest manufacturing standards, competitive prices, excellent service and a 3-year warranty.New body design – modern, robust and designed for long-term workshop useMaximum ergonomics & comfort – optimised hand position for longer painting jobsNo gaps between air and material – reduces potential problem areas and makes cleaning easierInternal air distributor – prevents loose parts and reduces wear and tear caused by loose componentsStainless steel nozzle & needle – robust material combination for long-term useMatt chrome-plated finish – high-quality appearance and easier cleaningTime-saving – including maintenance and cleaning benefits and a service-friendly designStrict compliance with manufacturing and emissions standards – for professional, regulation-compliant operationSuitable for mobile compressors (> 2HP) and low-consumption air caps – practical for many businessesHVLP: Maximum saving and minimum mist – maximum savings, minimal mist21EPA: High-performance finishes – high-quality finishAir consumption / spray distance (system comparison):HVLP: 355 L/min | Spray distance 12–15 cm21EPA: 225 L/min | Spray distance 18–20 cmConventional 25/36/28: 155 / 205 / 240 L/min | Spray distance 18–20 cmKey technical data (excerpt): Weight with cup 481 g, cup 650 ml, product filter 80 mesh, air connection 1/4", recommended max. inlet pressure 2 bar.Standards & approvals (excerpt): CE, EN 1953, ATEX II 2 GX. Additionally: patented air valve and registered Community Design. Variant overview The Classic Pro XD is precisely tailored to the material and application through the choice of air cap and nozzle size. SAGOLA distinguishes between three basic systems: 21EPA (high-quality finishes, high performance), HVLP (maximum savings & minimal overspray) and Conventional via the 25 / 36 / 28 air caps for heavier material applications and special effects. The recommendations for each nozzle size range from paints/stains and finishes to HS primers, high-viscosity primers and water-based systems. Variant / DesignationModelManufacturer’s No.Suitable for 21EPA Air Cap & 1.40 mm21 EPA – High-quality finishes10141620For high-quality finishes (e.g. lacquers and stains/dyes) where surface quality is a priority. 21EPA Air Cap & 1.60 mm21 EPA – Finishes and Primers10141623For finishes and primers, suitable for paints & clear coats, wood and HS primers in a controlled build-up. 21EPA Air Cap & 1.80 mm21 EPA – HS Primer / high thickness10141625For HS primers, higher film thicknesses and base coats/primers where material build-up and filling capacity are required. Conventional air cap 25 & 2.00 mm25 – HS Primer / high thickness10141627For HS primers and high material application (high film thickness), ideal for building up a thick coat in a short time. Conventional air cap 36 & 2.50 mm36 – Primers / high viscosity10141629For high-viscosity primers; also suitable for clear coats and water-based paints when high flow rate is required. Conventional air cap 28 & 2.80 mm28 – Viscous primers / Forged effect10141630For very viscous primers and applications with a forged effect (textured finish), where maximum flow rate is crucial. HVLP air cap & 1.40 mmHVLP – Industrial finishes / Dyes10141621For industrial finishes and stains/dyes – where maximum savings with minimal overspray are required. HVLP air cap & 1.60 mmHVLP – Industrial finishes and primers10141624For industrial finishes and primers, including HS primers, where a balanced mix of surface finish and build-up is required. HVLP air cap & 1.80 mmHVLP – HS primer / high thickness10141626For HS primers, high film thicknesses and base coats/primers – ideal when higher throughput is required but HVLP benefits must be retained. HVLP air cap & 2.50 mmHVLP – Primers / high viscosity10141631For high-viscosity primers as well as clear coats and water-based paints, where high material flow with HVLP spraying performance is required. Accessories/Variants: The right consumables and accessories are crucial for a stable process. Depending on the application, the Classic Pro XD can be supplemented with suitable nozzle + needle kits, air caps as spare parts, and an RC2 air flow regulator with pressure gauge. Additionally, cup/filter solutions are recommended for a clean material supply. Nozzle sets (nozzle + needle) – selection guide The Classic Pro XD works with matched nozzle + needle kits. The nozzle size directly influences material throughput, film build-up and suitability for thin or thick materials. The larger the nozzle, the higher the throughput – ideal for primers/high-viscosity products. Smaller nozzles support fine finishes.1.40 mm: high-quality finishes (paints, stains/dyes)1.60 mm: finishes & primers (paints/clear coats, wood, HS primers)1.80 mm: HS primers / high film thicknesses (base coats, primers)2.00–2.80 mm: thicker/high-viscosity primers and special effects (forged effect), depending on the air capIf you tell me the material type (finish/primer/high-viscosity/water-based) and the desired film thickness, I can recommend the right combination of air cap and nozzle size. Tip: HVLP is ideal for maximum savings and minimal overspray. 21EPA is the right choice if you prioritise high-quality, high-performance finishes. For thicker/high-viscosity primers and special effects, the conventional 25/36/28 air caps with larger nozzle sizes are intended. Intended use / Applications The Classic Pro XD is a universal professional solution that covers a wide range of materials and industries depending on the air cap and nozzle. The decisive factor is the combination of spray system (finish/cost-saving/conventional) and material throughput (nozzle size). Bodyshop: Primers and sprayable mastics/fillersIndustry: Finishes and primers in production and workshop applicationsWood: Varnishes and clear coats, base coats, water-based clear coatsDecoration: Enamels and clear coats In practical terms, this means: with 1.40–1.60 mm, you cover many finish and standard priming tasks; with 1.80 mm, you move more into HS primers/layer build-up; and with 2.00–2.80 mm, you address high-viscosity primers and special effects – in each case in combination with the appropriate air cap. Product flyer Further details on the SAGOLA Classic Pro XD (technical specifications, air caps, versions/order codes, spare parts, accessories & warranty) can be found in the manufacturer’s documentation (brochure). To the Classic Pro XD brochure (PDF)

Two ways to the perfect result: HVLP and RP®The "Extra-Sparsame" SATAjet X 5500 HVLP achieves particularly high transfer rates with its low-pressure technology.The "extra-fast" SATAjet X 5500 RP for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Top in all areas of application - SATAjet X 5500With the SATAjet X 5500 you can achieve the highest surface quality: when painting e.g. cars, commercial vehicles, furniture, yachts or high-quality industrial parts - with all paint systems.For information on choosing the right nozzle - whether for base coats, clear coats or solid colours - contact your SATA dealer or visit our website: www.sata.com/SATAjetX5500Revolutionary. Economical. Quiet. Logical.The revolutionary nozzle systemDemanding paint systems and new processing recommendations create new possibilities, but also present the user with challenges. The SATAjet X 5500 sets a new standard for the future with the new X nozzle system.The nozzle system is simple and easy to understand: The two proven technologies - namely HVLP and RP - remain.There are "I" and "O" nozzle sets for each.With increasing nozzle size in the respective technology (HVLP/RP) and jet shape ("I" or "O"), the material ejection also increases constantly - this means that the respective jet height and width remain the same across the entire spectrum. The user therefore has a transparent and logical system that gives him clear and structured decision-making options.The "I" nozzles have an elongated jet shape with a short run-off zone and a drier jet core, which is ideal for a lower application speed and offers maximum control during painting. The coating thickness per spray pass is slightly lower compared to an "O" nozzle with the same nozzle size.Stretched jet shape with little run-off zoneImproved control during applicationReduced layer application per spray pass compared to the previous or "O" nozzleThe "O" nozzles have an oval jet shape with a larger run-off zone and a wet jet core, which is suitable for higher application speeds, but offers slightly less control during painting. The coating thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.Oval jet shape with larger run-off zoneWet jet core for a higher working speedCoating thickness per spray pass slightly higher than with the "I" nozzleAdvantagesRevolutionary: The atomisation of the X-nozzles sets new standardsNoticeably quieter: Whisper nozzle™ thanks to optimised flow geometry, reduced noise level in the relevant frequency rangesCustomised: Suitable for every application requirement, such as properties of the paint system, climatic conditions or painting habits (working speed/control)Precise: Optimised material distribution for more even and finer atomisation in both spray variantsLow maintenance: No air distributor ring required, making cleaning easier and quickerLogical: Constant jet dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughputEfficient: Significant material savings are possible with the same application methodWhat are the advantages of the X-nozzle system?Depending on the characteristics of the paint system, the climatic conditions and the painting habits, the painter can select the spray gun with the appropriate nozzle set for his individual requirements. Thanks to the logical structure of the system, decisions can be made easily and safely to achieve optimum painting results.What else is new? Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can now also be dispensed with. In addition, the volume of this whisper nozzle has also been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting. And best of all: the X-nozzle gun uses less paint material!Spray mouldsIn order to achieve an optimum spray jet without any compromises, far more factors than simply ambient temperature and humidity must be taken into account.The selected paint material with corresponding additives, the object size, the recommended coating thickness and individual painting habits such as working speed or control also play an important role when selecting a nozzle.The SATAjet X 5500, perfect down to the smallest detailThe following tools are available to the painter to help determine the right nozzle:SATA website: www.sata.com/SATAjetX5500SATA nozzle finder app: www.sata.com/nozzlefinderSuitable areas of applicationIndustrial applicationsCarpentryPaintingYacht and boat buildingTechnical information - RP DownloadsLacquer data sheet

SAGOLA Classic Pro XD Spray Gun – High-Transfer Gravity-Fed Spray Gun for Automotive, Industrial, Wood & Decorative Applications (21EPA / HVLP / Conventional 25/36/28)The SAGOLA Classic Pro XD is a high-transfer gravity spray gun designed for robustness and versatility – making it a professional solution for automotive, industrial, wood and decorative applications.SAGOLA positions the Classic Pro XD in the mid- to high-range segment, combining high manufacturing standards with competitive prices, excellent service and a 3-year warranty.For many users, the Classic Pro XD is also an attractive professional alternative to SATA (and comparable premium spray guns) when looking for a gun that offers excellent atomisation, high transfer efficiency and practical robustness – with a very good price-performance ratio and a 3-year warranty.The focus is on a modern spray gun with a new body design, improved ergonomics and a very wide range of application solutions. Thanks to the new air caps, the typically high Sagola spray quality and maximum paint transfer, the Classic Pro XD is suitable for both fine finishing work and priming/filler tasks – depending on the air cap and nozzle set selected.A key feature in daily use is the structural separation with no connecting joints between air and material (“No joints between air and paint”). This facilitates cleaning, reduces potential wear and leakage points, and increases process reliability during continuous operation.In addition, the internal air distributor ensures that no loose parts are created which could come loose or wear out over time – a clear advantage for workshops and industrial users who rely on reliable, consistent performance.The Classic Pro XD is also of interest to users working with smaller or mobile compressors: it is specifically designed for use with portable compressors > 2HP and utilises a low-consumption air cap, which is a real practical advantage in many workplaces.New body design – maximum ergonomics and high comfort in daily useNo gaps between air and material – easier to clean, fewer points of failureStainless steel nozzles & stainless steel needles – robust and durableNew air caps (21EPA / HVLP / conventional 25/36/28) – wide range of applications from finish to primerDetails & information Product features The Classic Pro XD is designed for professional everyday use: robust construction, high spray quality, efficient material utilisation and easy maintenance. SAGOLA emphasises the combination of the highest manufacturing standards, competitive prices, excellent service and a 3-year warranty.New body design – modern, robust and designed for long-term workshop useMaximum ergonomics & comfort – optimised hand position for longer painting jobsNo gaps between air and material – reduces potential problem areas and makes cleaning easierInternal air distributor – prevents loose parts and reduces wear and tear caused by loose componentsStainless steel nozzle & needle – robust material combination for long-term useMatt chrome-plated finish – high-quality appearance and easier cleaningTime-saving – including maintenance and cleaning benefits and a service-friendly designStrict compliance with manufacturing and emissions standards – for professional, regulation-compliant operationSuitable for mobile compressors (> 2HP) and low-consumption air caps – practical for many businessesHVLP: Maximum saving and minimum mist – maximum savings, minimal mist21EPA: High-performance finishes – high-quality finishAir consumption / spray distance (system comparison):HVLP: 355 L/min | Spray distance 12–15 cm21EPA: 225 L/min | Spray distance 18–20 cmConventional 25/36/28: 155 / 205 / 240 L/min | Spray distance 18–20 cmKey technical data (excerpt): Weight with cup 481 g, cup 650 ml, product filter 80 mesh, air connection 1/4", recommended max. inlet pressure 2 bar.Standards & approvals (excerpt): CE, EN 1953, ATEX II 2 GX. Additionally: patented air valve and registered Community Design. Variant overview The Classic Pro XD is precisely tailored to the material and application through the choice of air cap and nozzle size. SAGOLA distinguishes between three basic systems: 21EPA (high-quality finishes, high performance), HVLP (maximum savings & minimal overspray) and Conventional via the 25 / 36 / 28 air caps for heavier material applications and special effects. The recommendations for each nozzle size range from paints/stains and finishes to HS primers, high-viscosity primers and water-based systems. Variant / DesignationModelManufacturer’s No.Suitable for 21EPA Air Cap & 1.40 mm21 EPA – High-quality finishes10141620For high-quality finishes (e.g. lacquers and stains/dyes) where surface quality is a priority. 21EPA Air Cap & 1.60 mm21 EPA – Finishes and Primers10141623For finishes and primers, suitable for paints & clear coats, wood and HS primers in a controlled build-up. 21EPA Air Cap & 1.80 mm21 EPA – HS Primer / high thickness10141625For HS primers, higher film thicknesses and base coats/primers where material build-up and filling capacity are required. Conventional air cap 25 & 2.00 mm25 – HS Primer / high thickness10141627For HS primers and high material application (high film thickness), ideal for building up a thick coat in a short time. Conventional air cap 36 & 2.50 mm36 – Primers / high viscosity10141629For high-viscosity primers; also suitable for clear coats and water-based paints when high flow rate is required. Conventional air cap 28 & 2.80 mm28 – Viscous primers / Forged effect10141630For very viscous primers and applications with a forged effect (textured finish), where maximum flow rate is crucial. HVLP air cap & 1.40 mmHVLP – Industrial finishes / Dyes10141621For industrial finishes and stains/dyes – where maximum savings with minimal overspray are required. HVLP air cap & 1.60 mmHVLP – Industrial finishes and primers10141624For industrial finishes and primers, including HS primers, where a balanced mix of surface finish and build-up is required. HVLP air cap & 1.80 mmHVLP – HS primer / high thickness10141626For HS primers, high film thicknesses and base coats/primers – ideal when higher throughput is required but HVLP benefits must be retained. HVLP air cap & 2.50 mmHVLP – Primers / high viscosity10141631For high-viscosity primers as well as clear coats and water-based paints, where high material flow with HVLP spraying performance is required. Accessories/Variants: The right consumables and accessories are crucial for a stable process. Depending on the application, the Classic Pro XD can be supplemented with suitable nozzle + needle kits, air caps as spare parts, and an RC2 air flow regulator with pressure gauge. Additionally, cup/filter solutions are recommended for a clean material supply. Nozzle sets (nozzle + needle) – selection guide The Classic Pro XD works with matched nozzle + needle kits. The nozzle size directly influences material throughput, film build-up and suitability for thin or thick materials. The larger the nozzle, the higher the throughput – ideal for primers/high-viscosity products. Smaller nozzles support fine finishes.1.40 mm: high-quality finishes (paints, stains/dyes)1.60 mm: finishes & primers (paints/clear coats, wood, HS primers)1.80 mm: HS primers / high film thicknesses (base coats, primers)2.00–2.80 mm: thicker/high-viscosity primers and special effects (forged effect), depending on the air capIf you tell me the material type (finish/primer/high-viscosity/water-based) and the desired film thickness, I can recommend the right combination of air cap and nozzle size. Tip: HVLP is ideal for maximum savings and minimal overspray. 21EPA is the right choice if you prioritise high-quality, high-performance finishes. For thicker/high-viscosity primers and special effects, the conventional 25/36/28 air caps with larger nozzle sizes are intended. Intended use / Applications The Classic Pro XD is a universal professional solution that covers a wide range of materials and industries depending on the air cap and nozzle. The decisive factor is the combination of spray system (finish/cost-saving/conventional) and material throughput (nozzle size). Bodyshop: Primers and sprayable mastics/fillersIndustry: Finishes and primers in production and workshop applicationsWood: Varnishes and clear coats, base coats, water-based clear coatsDecoration: Enamels and clear coats In practical terms, this means: with 1.40–1.60 mm, you cover many finish and standard priming tasks; with 1.80 mm, you move more into HS primers/layer build-up; and with 2.00–2.80 mm, you address high-viscosity primers and special effects – in each case in combination with the appropriate air cap. Product flyer Further details on the SAGOLA Classic Pro XD (technical specifications, air caps, versions/order codes, spare parts, accessories & warranty) can be found in the manufacturer’s documentation (brochure). To the Classic Pro XD brochure (PDF)

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: Gun with 0.6 litre QCC plastic reusable cup without swivel jointSuitable areas of applicationVehicle painting

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: SATAjet 100 B F RP nozzle 1.4 UV RPS multi-purpose cup 0.3 / 0.6 / 0.9 I (3x) without swivel jointSuitable areas of applicationVehicle painting

SATAjet 100 B P RPS multipurpose beaker 0.3 l / 0.6 l / 0.9 l (1x each)

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: SATAjet 100 B F HVLP nozzle 1.4 0.75 l QCC aluminium reusable cup without swivel jointSuitable areas of applicationVehicle painting

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: Gun with 0.6 litre QCC plastic reusable cup without swivel jointSuitable areas of applicationVehicle painting

SATAjet® 100 B spray gunThe SATAjet® 100 B spray gun can be used for a wide range of applications thanks to its extreme flexibility in setting the atomiser pressure, especially for filler applications. Thanks to the wide spray jet and fine atomisation, fillers and primers can be applied smoothly despite the higher material viscosity. This saves valuable working time by reducing the amount of sanding required. Advantages of the SATAjet® 100 B spray gun:Fine atomisation even at low inlet flow pressureLow paint mistPressure setting of 0.5 - 2.0 bar possibleSmoothly polished, ergonomically optimised gun bodyQCC cup connectionSelf-adjusting sealsEfficient filler gunTwo ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray.Both versions can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Scope of delivery: Gun with 0.6 litre QCC plastic reusable cup without swivel jointSuitable areas of applicationVehicle painting

SATAjet X 5500 Clear Coat EditionTOTALLY CLEAR! SATAjet X 5500 RP 1.3cc for clear coat application.The SATAjet X 5500 Clear Coat Edition shines with a newly developed, special nozzle set for clear coat application. The optimised material distribution in combination with finer atomisation enables users to achieve closed wetting even with thin layers.The special clear lacquer nozzle has the additional designation "cc" (SATAjet X 5500 RP 1.3cc) The advantages at a glance:Special clearcoat nozzle based on the proven I-nozzle technologyFine and homogeneous atomisation for a perfect clear coat levelClosed wetting even with low layer thicknessesI-nozzle spray geometry enables controlled application

Two ways to the perfect result: HVLP and RP®The "Extra-Sparsame" SATAjet X 5500 HVLP achieves particularly high transfer rates with its low-pressure technology.The "extra-fast" SATAjet X 5500 RP for maximum working speed with optimised high-pressure technology and low overspray.Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Top in all areas of application - SATAjet X 5500With the SATAjet X 5500 you can achieve the highest surface quality: when painting e.g. cars, commercial vehicles, furniture, yachts or high-quality industrial parts - with all paint systems.For information on choosing the right nozzle - whether for base coats, clear coats or solid colours - contact your SATA dealer or visit our website: www.sata.com/SATAjetX5500Revolutionary. Economical. Quiet. Logical.The revolutionary nozzle systemDemanding paint systems and new processing recommendations create new possibilities, but also present the user with challenges. The SATAjet X 5500 sets a new standard for the future with the new X nozzle system.The nozzle system is simple and easy to understand: The two proven technologies - namely HVLP and RP - remain.There are "I" and "O" nozzle sets for each.With increasing nozzle size in the respective technology (HVLP/RP) and jet shape ("I" or "O"), the material ejection also increases constantly - this means that the respective jet height and width remain the same across the entire spectrum. The user therefore has a transparent and logical system that gives him clear and structured decision-making options.The "I" nozzles have an elongated jet shape with a short run-off zone and a drier jet core, which is ideal for a lower application speed and offers maximum control during painting. The coating thickness per spray pass is slightly lower compared to an "O" nozzle with the same nozzle size.Stretched jet shape with little run-off zoneImproved control during applicationReduced layer application per spray pass compared to the previous or "O" nozzleThe "O" nozzles have an oval jet shape with a larger run-off zone and a wet jet core, which is suitable for higher application speeds, but offers slightly less control during painting. The coating thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.Oval jet shape with larger run-off zoneWet jet core for a higher working speedCoating thickness per spray pass slightly higher than with the "I" nozzleAdvantagesRevolutionary: The atomisation of the X-nozzles sets new standardsNoticeably quieter: Whisper nozzle™ thanks to optimised flow geometry, reduced noise level in the relevant frequency rangesCustomised: Suitable for every application requirement, such as properties of the paint system, climatic conditions or painting habits (working speed/control)Precise: Optimised material distribution for more even and finer atomisation in both spray variantsLow maintenance: No air distributor ring required, making cleaning easier and quickerLogical: Constant jet dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughputEfficient: Significant material savings are possible with the same application methodWhat are the advantages of the X-nozzle system?Depending on the characteristics of the paint system, the climatic conditions and the painting habits, the painter can select the spray gun with the appropriate nozzle set for his individual requirements. Thanks to the logical structure of the system, decisions can be made easily and safely to achieve optimum painting results.What else is new? Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can now also be dispensed with. In addition, the volume of this whisper nozzle has also been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting. And best of all: the X-nozzle gun uses less paint material!Spray mouldsIn order to achieve an optimum spray jet without any compromises, far more factors than simply ambient temperature and humidity must be taken into account.The selected paint material with corresponding additives, the object size, the recommended coating thickness and individual painting habits such as working speed or control also play an important role when selecting a nozzle.The SATAjet X 5500, perfect down to the smallest detailThe following tools are available to the painter to help determine the right nozzle:SATA website: www.sata.com/SATAjetX5500SATA nozzle finder app: www.sata.com/nozzlefinderSuitable areas of applicationIndustrial applicationsCarpentryPaintingYacht and boat buildingTechnical information - RP DownloadsLacquer data sheet

Two paths to perfect results: HVLP and RP®The "extra-economical" SATAjet X 5500 HVLP achieves particularly high transfer rates with its low-pressure technology.The "extra-fast" SATAjet X 5500 RP for maximum working speed with optimised high-pressure technology and low overspray.Both versions are highly flexible, meet the highest standards for painting results and significantly exceed the transfer rates of 65% required by the VOC guideline.Top in all areas of application – SATAjet X 5500SATAjet X 5500 allows you to achieve the highest surface quality: when painting cars, commercial vehicles, furniture, yachts or high-quality industrial parts, for example – with all types of paint.Your SATA dealer or our website will be happy to help you select the right nozzle, whether for base, clear or uni coats: www.sata.com/SATAjetX5500Revolutionary. Economical. Quiet. Logical.The revolutionary nozzle systemSophisticated paint systems and new application recommendations create new possibilities, but also present the user with challenges. With its new X-nozzle system, the SATAjet X 5500 sets a new standard for the future.The nozzle system is simple and logical: the two proven technologies – namely HVLP and RP – remain.For each of them, there are "I" and "O" nozzle sets.With increasing nozzle size in the respective technology (HVLP/RP) and spray pattern ("I" or "O"), the material ejection also increases constantly – this means that the respective spray height and width remain the same over the entire spectrum. This provides the user with a transparent and logical system that gives them clear and structured decision-making options.The "I" nozzles have an elongated spray pattern with a short run-out zone and a drier spray core, which is ideal for lower application speeds and offers maximum control when painting. The layer thickness per spray pass is slightly lower for the same nozzle size compared to an "O" nozzle.Stretched fan shape with little run-out zoneImproved control during applicationReduced layer application per spray pass compared to the previous or "O" nozzle The "O" nozzles have an oval spray pattern with a larger run-out zone and a wet spray core, which is suitable for higher application speeds but offers slightly less control when painting. The layer thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.Oval fan shape with larger run-out zoneWet spray core for a higher working speedSlightly higher layer application per spray pass than with the "I" nozzleAdvantagesRevolutionary: the atomisation of the X-nozzles sets new standardsNoticeably quieter: optimised flow geometry of the Whisper Nozzle™ reduces noise in the relevant frequency rangesIndividual: Suitable for every application requirement, such as the properties of the paint system, climatic conditions or painting habits (working speed/control)Precise: Optimised material distribution for a more even and finer atomisation in both spray variantsLow maintenance: No air distribution ring required, thus enabling easier and faster cleaningLogical: constant spray dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughputEfficient: A considerable amount of material can be saved with the same application methodWhat are the advantages of the X-nozzle system?Depending on the properties of the paint system, the climatic conditions and the painting habits, the painter can select the spray gun with the appropriate nozzle set for his individual requirements. The logical structure of the system makes it easy to make the right decisions to achieve an optimal painting result.What else is new? Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can now be dispensed with. In addition, the noise level of this whisper nozzle has been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting. And best of all: the X-nozzle gun uses less paint!Spray patternsTo achieve an optimal spray pattern without any compromises, many more factors than just ambient temperature and humidity must be considered.The selected paint material with the corresponding additives, the size of the object, the recommended layer thickness, the individual painting habits, such as working speed or control, also play an important role in the selection of a nozzle.SATAjet X 5500, perfect in every detailTo determine the appropriate nozzle, the painter has the following tools at his disposal:SATA website: www.sata.com/SATAjetX5500SATA Spray Finder App: www.sata.com/nozzlefinderSuitable areas of applicationindustrial applicationsCarpentryPainting tradeYacht and boat buildingTechnical Information - RP DownloadsPaint data sheet

SATAjet 1000 B reusable cup (QCC) without swivel jointSATAjet 1000 B reusable cup (QCC) without swivel joint is a universal, low-cleaning and ergonomic spray gun. It is the all-rounder among the flow cup spray guns. Thanks to the wide range of nozzles and diverse accessories such as pressure and agitator cups as well as extensions, a wide variety of materials can be processed with ease.AdvantagesAll-rounder: Thanks to the wide range of nozzles and diverse accessories, a wide variety of materials can be processed with easeSimplified cleaning: The smooth surface of the gun body makes cleaning easier for the userQC-Quick Change thread: Quick and easy air nozzle change with just 1.5 turnsAlso for hard-to-reach areas: Thanks to the available extensions, hard-to-reach or narrower and deeper areas are no problem with the SATAjet 1000 B Two ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Suitable areas of applicationIndustrial applicationsCarpentryPainting tradeYacht and boat building DownloadsPaint data sheet metricDeclaration of conformityOperating instructions- SATAjet 1000 B

SATAminijet 4400 B – Compact, Precise and Versatile The SATAminijet 4400 B is the perfect solution for precision paintwork on small surfaces or in hard-to-reach areas. Thanks to its compact design, easy cleaning, and low-maintenance technology, it is ideal for demanding users across a wide range of industries – from automotive refinishing and carpentry to yacht building. The key benefits of the SATAminijet 4400 B at a glance: Compact design: Enables accurate work on small surfaces and in hard-to-access areas. Spot Repair nozzles (SR): Special nozzle sets for pinpoint repairs of minor paint damage without the need to remove vehicle parts. Low maintenance: Self-adjusting seals on the air piston and fluid needle reduce maintenance effort and increase service life. Easy to clean: Smart design for fast and simple cleaning – ideal for daily use. Areas of application: Automotive refinishing: Ideal for spot repair, blend-ins, and detail work. Industrial applications: For precise coating jobs in industrial environments. Carpentry: Fine finishing of furniture and wooden surfaces. Painting and decorating: For creative detail work and small repairs. Yacht and boat building: Especially suitable for tight spaces and high-quality surfaces. Two technologies for perfect results – HVLP and RP HVLP technology (High Volume Low Pressure): Highly material- and environmentally-friendly thanks to high transfer efficiency at low pressure. Ideal for fine finishing work. RP technology (Reduced Pressure): Optimized high-pressure technology for maximum working speed and efficiency with minimal overspray. Both versions exceed the requirements of the VOC Directive, with transfer efficiency rates well above 65%. What does “SR” mean for the SATAminijet 4400 B? The designation SR stands for Spot Repair – a special nozzle concept for the targeted repair of small to medium paint damage. The repair is carried out directly on the vehicle, without any disassembly. Ideal for workshops that focus on efficiency and quality.

SATAjet 1000 B reusable cup (QCC) without swivel jointSATAjet 1000 B reusable cup (QCC) without swivel joint is a universal, low-cleaning and ergonomic spray gun. It is the all-rounder among the flow cup spray guns. Thanks to the wide range of nozzles and diverse accessories such as pressure and agitator cups as well as extensions, a wide variety of materials can be processed with ease.AdvantagesAll-rounder: Thanks to the wide range of nozzles and diverse accessories, a wide variety of materials can be processed with easeSimplified cleaning: The smooth surface of the gun body makes cleaning easier for the userQC-Quick Change thread: Quick and easy air nozzle change with just 1.5 turnsAlso for hard-to-reach areas: Thanks to the available extensions, hard-to-reach or narrower and deeper areas are no problem with the SATAjet 1000 B Two ways to the perfect result: HVLP and RPHVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Suitable areas of applicationIndustrial applicationsCarpentryPainting tradeYacht and boat building DownloadsPaint data sheet metricDeclaration of conformityOperating instructions- SATAjet 1000 B

SATAjet 20 B nozzle 0.5 65 ml plastic reusable cups, glass cups and 3 glass cups with dummy lids

SATAjet 20 B nozzle 0.2 fineline 65 ml plastic reusable cup

SATAjet X – The future of paint spray technologyDiscover the SATAjet X, the latest innovation from SATA. Developed to meet the most demanding requirements of professional painters, the SATAjet X offers a completely new spraying experience. With its state-of-the-art technology and ergonomic design, it sets new standards for efficiency, precision and surface quality.Key features of the SATAjet X:X-Technology for maximum efficiency: The heart of the new SATAjet X is the revolutionary X-Technology, which ensures even greater material efficiency and optimised paint application. The system adapts seamlessly to the specific requirements of different painting processes.Innovative nozzle concepts for perfect results: the new X-nozzle system enables precise control of the spray pattern and guarantees exceptionally even paint distribution. Whether you are spraying large surfaces or intricate details, the SATAjet X is the perfect solution.Combining HVLP and RP technology: With a choice between HVLP (High Volume, Low Pressure) and RP (Reduced Pressure) technology, the SATAjet X is flexible and universally applicable. Both technologies minimise overspray and ensure a high transfer rate and excellent surface quality.Ergonomic design for comfortable working: The SATAjet X was developed with a particular focus on ergonomics. It fits perfectly in the hand, which allows for comfortable working without fatigue, even during long periods of use. The lightweight design and intuitive handling make it the ideal choice for professionals who need to work with high precision on a daily basis.Optimised air flow: The improved air flow ensures even atomisation of the paint, resulting in a finer spray pattern and excellent surface quality. The reduced air consumption also means lower operating costs.Fields of application:SATAjet X is the perfect choice for automotive refinishing, industrial applications and the finest detail work. Thanks to its universal design and variable settings, it can be used for basecoats, clear coats and primers.The advantages of SATAjet X at a glance:Maximum material efficiency thanks to X-technologyReduced overspray for lower material consumptionErgonomic design for fatigue-free workingPerfect surface quality for every applicationVersatile application options in a range of industriesConclusion:SATAjet X is more than just a spray gun – it is a tool that helps painters save time and material while achieving uncompromising results. Developed for professionals who place the highest demands on their work, it is the future of painting technology.Product video:

SATAjet X – The future of paint spray technologyDiscover the SATAjet X, the latest innovation from SATA. Developed to meet the most demanding requirements of professional painters, the SATAjet X offers a completely new spraying experience. With its state-of-the-art technology and ergonomic design, it sets new standards for efficiency, precision and surface quality.Key features of the SATAjet X:X-Technology for maximum efficiency: The heart of the new SATAjet X is the revolutionary X-Technology, which ensures even greater material efficiency and optimised paint application. The system adapts seamlessly to the specific requirements of different painting processes.Innovative nozzle concepts for perfect results: the new X-nozzle system enables precise control of the spray pattern and guarantees exceptionally even paint distribution. Whether you are spraying large surfaces or intricate details, the SATAjet X is the perfect solution.Combining HVLP and RP technology: With a choice between HVLP (High Volume, Low Pressure) and RP (Reduced Pressure) technology, the SATAjet X is flexible and universally applicable. Both technologies minimise overspray and ensure a high transfer rate and excellent surface quality.Ergonomic design for comfortable working: The SATAjet X was developed with a particular focus on ergonomics. It fits perfectly in the hand, which allows for comfortable working without fatigue, even during long periods of use. The lightweight design and intuitive handling make it the ideal choice for professionals who need to work with high precision on a daily basis.Optimised air flow: The improved air flow ensures even atomisation of the paint, resulting in a finer spray pattern and excellent surface quality. The reduced air consumption also means lower operating costs.Fields of application:SATAjet X is the perfect choice for automotive refinishing, industrial applications and the finest detail work. Thanks to its universal design and variable settings, it can be used for basecoats, clear coats and primers.The advantages of SATAjet X at a glance:Maximum material efficiency thanks to X-technologyReduced overspray for lower material consumptionErgonomic design for fatigue-free workingPerfect surface quality for every applicationVersatile application options in a range of industriesConclusion:SATAjet X is more than just a spray gun – it is a tool that helps painters save time and material while achieving uncompromising results. Developed for professionals who place the highest demands on their work, it is the future of painting technology.Product video:

SATAjet 1000K paint spray gun paint connectionThe compact and lightweight SATAjet 1000 K is the all-rounder among paint spray guns with material supply from pressure tanks or via double diaphragm pumps. Thanks to the wide range of nozzles, this spray gun is ideal for processing a wide variety of materials, such as low-viscosity wood stains, clear coats, textured coatings and glazes through to adhesives and other high-viscosity materials.Advantages of the SATAjet 1000K paint spray gun with colour connection: Can be used to process a wide range of materials - water-based or solvent-based Easy-to-grip, ergonomic handling of the operating elements such as material quantity regulation, round/wide jet regulation for one-handed operation and integrated air micrometer QC thread for quick and easy air nozzle changes with just 1.5 turns Special air guides on the horns of the air cap prevent deposits caused by return mist With extensions in various designs, even hard-to-reach areas can be perfectly beschicht. Two ways to the perfect result: HVLP and RP HVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive. Beschichtpunkt GmbH offers solutions for all aspects of surface coating. With a wide range of products and good service, we offer our customers high-quality solutions for coating We deliver reliable products on time and at a reasonable price. We deliver top performance every day. That's why our customers' success is our success. Our team is united by a passion for the perfect surface.

 

SATAjet 5000BFLEXIBLE, ERGONOMIC AND EASY TO USEWith the SATAjet 5000 B, painters can adjust the inlet pressure and the spray distance according to the paint used, the climatic conditions and their working style – and achieve perfect results in every situation. The ergonomic spray gun was developed in collaboration with Porsche Design Studio – so it fits perfectly in the hand. Robust yet lightweight – with ergonomic adjustment elements, the SATAjet 5000 B makes work a pleasure.Advantages of SATAjet 5000BFlexible application: Optimised nozzle concept for a wide range of spray distances and inlet pressuresErgonomic design: comfortable and compact handle shape, combined with easy-to-use controlsEasy to clean: PerloxalTM surface finish to improve corrosion resistance and make it even easier to clean and care forQuick assembly: the secure clamp roller makes the paint needle easy, safe and quick to fitEasy control: Optimised round/flat fan control with a half-turnSATAjet 5000B application areas:vehicle painting- Carpentry- Painting trade- Yacht and boat buildingTwo ways to a perfect finish: HVLP and RPHVLP: Extra economical – HVLP spray guns achieve particularly high transfer rates with their low-pressure technology.RP: Extra Fast – RP spray guns are designed for maximum working speed with optimised high-pressure technology and low overspray.Both variants are highly flexible in use, meet the highest standards for the painting result and significantly exceed the transfer rates of 65% required by the VOC guideline.

SATA vision 2000The SATA vision 2000 is a full bonnet specially designed to meet the requirements of painters. It effectively protects the respiratory tract, eyes, skin and hair. It also offers a high level of comfort and optimum hygiene. The bonnet with hygienic bonnet insert, replaceable sweatband and acoustic warning device is available as a set. This includes a belt unit - optionally with activated carbon adsorber and air flow regulation and display or a T-piece with air flow regulation. Safe. Lightweight. High wearing comfort.This full bonnet is specially designed to meet the requirements of painters and protects the respiratory tract, eyes, skin and hair (particularly important with water-based materials). It also offers a high level of comfort and optimum hygiene. The bonnet with silencer, hygienic bonnet insert, replaceable sweatband and acoustic warning device is available as a set. This includes a belt unit - optionally with activated carbon adsorber and air flow regulation and display or a T-piece with regulation.AdvantagesHigh breathing air quality thanks to ambient air-independent air supply, no inhalation resistance, high breathing comfortHigh protective function, also for continuous useProtects up to 100 times the TRK valueOne-handed operation of the visorReflection-free vision thanks to special solvent-resistant filmLow operating costs, rapid amortisation of purchase costsRespiratory protection is health protectionRespiratory protection systems from SATA, whether as a bonnet or half mask, impress with their maximum protective function, long service life and comfortable wearing properties. This means health protection with complete freedom of movement and a high level of acceptance among painters.Respiratory protective devices can be categorised into two types: ambient air-independent devices and ambient air-dependent devices. Ambient air-independent systems supply the painter with breathing air from an area outside the working environment via a compressed air hose. This air is usually additionally purified by a filter system. In ambient air-dependent systems, on the other hand, the air comes from the working environment, which is contaminated with particles and vapours. The filters for cleaning the breathing air are located on the mask.Functional diagram of compressed air-fed respiratory protectionDownloadsOperating instructions Manual - SATA vision 2000 DOWNLOADEN - EC Declaration of Conformity - SATA vision 2000 DOWNLOADEDEN - Leaflet- SATA vision 2000 DOWNLOADINGEN - Leaflet - SATA vision 2000 DOWNLOADING

Head spider 2.0 [for SATA air vision 5000]

Visor film, 6 holes (packaging unit 20 pieces) [for SATA air vision 5000]

Reusable plastic cup, 0.125 l with QCC and fine thread [for SATAminijet spray guns]

SATA adam 2 – the pressure always in viewTo achieve the right colour when painting, the correct inlet pressure at the spray gun is crucial. If this is too low or too high, the colour may vary. This results in expensive rework that disrupts operations. The cause of the error "incorrect inlet flow pressure" can be ruled out with SATA digital spray guns or with the appropriate accessories. SATA adam 2The SATA adam 2 is the compact retrofit solution for SATA spray guns. It consists of two components: the dock replaces the gun's air micrometer and allows for quick and precise adjustment of the inlet pressure (+/- 0.05 bar). The highly precise electronic measuring system required for this is located in the display. This can be quickly and safely locked onto the "dock" and removed – for example, before cleaning the spray gun in a cleaning agentTo use the display with a SATA spray gun with a pre-assembled dock. The docks are available separately, so you can equip all of your SATA spray guns with them. Your advantage: With practically just one display, you can digitise your entire stock of spray guns at a low cost. By the way: The "display" is simply cleaned with a cloth soaked in cleaning agent.SATA adam 2 U (= Universal)With the universal version, you can digitise guns at the air inlet, such as the SATA dry jet blow-drying gun or paint spray guns from other manufacturers. The pressure can be precisely adjusted using an adjusting screw on the U dock.SATA dockThis adapter offers even more options for digital pressure measurement. In combination with the display, it replaces all analogue pressure gauges with 1/8in male thread, e.g. on pneumatic systems or when converting a SATA air micrometer with an analogue pressure gauge (art. no. 27771) or a SATA 400 series filter unit to digital, in no time at all.AdvantagesFor retrofitting – turns any standard spray gun into a "digital" onePrecise display and adjustment of the input pressure – ensures maximum colour reproducibilityThe display can be attached and removed with a single hand movement.Use of a display on different SATAspray guns. SATA adam 2 U also fits spray guns from other manufacturers – so you can "digitise" your entire gun inventory at a low cost.Long battery life, easy battery replacement

Reusable aluminium cup, 1.0 l with QCC and fine thread [for jet 5000 B, jet 4000 B, jet 3000 B, jet 2000, jet 1000 B, jet 100 B, jet 90, jet RP, LM 2000, KLC].

SATAjet 1000 B Spare Parts SATAjet 1000 B spare parts for your SATAjet 1000 B. The SATAjet 1000B is a universal, low-maintenance and ergonomic spray gun. It is the all-rounder among flow cup spray guns. Thanks to the wide range of nozzles and a variety of accessories, such as pressure and agitator cups and extensions, a wide range of materials can be processed excellently. Advantages All-rounder: Thanks to the wide range of nozzles and the many accessories, a wide variety of materials can be excellently processed. Simplified cleaning: The smooth surface of the spray gun body makes cleaning easier for the user. QC-Quick Change thread: Easy and fast air cap change with only 1.5 turns Even for hard-to-reach areas: thanks to the available extensions, the SATAjet 1000 B makes short work of hard-to-reach or narrow and deep areas Two ways to a perfect finish: HVLP and RP HVLP: Extra-efficient – HVLP paint spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra Fast - RP spray guns are designed for maximum working speed with optimised high-pressure technology and low overspray. Both variants are highly flexible in use, meet the highest standards for the painting result and significantly exceed the transfer rates of 65% required by the VOC guideline.Suitable applications industrial applications Carpentry Painting trade Yacht and boat building Paint data sheet metric Declaration of Conformity

SATAjet B / SATAjet GR spare parts SATAjet B / SATAjet GR spare parts for your SATAjet B / SATAjet GR spray gun. Economical. Low maintenance. Cost-effective. The proven high-performance spray gun for top-quality finishes. It offers fine atomisation with high area performance. With a high working speed and small size, it offers maximum ergonomics. Two ways to a perfect result: HVLP and RP HVLP: Extra economical – HVLP spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra Fast - RP spray guns are designed for maximum working speed with optimised high-pressure technology and low overspray. Both variants are highly versatile, meet the highest standards for painting results and significantly exceed the transfer rates of 65% required by the VOC Directive.Suitable applications vehicle painting

SATAjet X nozzle sets - precision and versatility for the highest demandsThe SATAjet X nozzle sets have been specially developed for professionals who expect maximum precision and flexibility when painting. Each set consists of a perfectly matched combination of nozzle, needle and air cap, enabling you to achieve the optimum spray pattern and the desired surface quality for every painting task.Main features of the SATAjet X nozzle sets:High-precision nozzles The nozzles of the SATAjet X nozzle sets guarantee an even, fine material application. Precise manufacturing and adaptation to the SATAjet X spray gun ensures optimum atomisation, so that both base coats and clear coats can be applied perfectly.Robust needles for maximum durability The needle is made of high-quality materials that ensure a long service life and resistance to wear. This ensures reliable and consistent painting over long periods of time, even in demanding applications.Perfectly matched air caps Each air cap is designed to provide even air distribution in combination with the nozzle and needle. This further optimises the atomisation of the paint, resulting in a fine and even paint distribution that ensures perfect finishes even on demanding projects.Areas of application:The SATAjet X nozzle sets are ideal for a wide range of painting jobs, from large-scale applications to detailed work. They are perfect for use in automotive painting, industrial coating and the finest repair work.Advantages of the SATAjet X nozzle sets at a glance:High-quality materials for long durability and precise resultsPerfectly matched components (nozzle, needle and air cap) for optimum atomisationVersatile application options for different types of paint and applicationsMaximum efficiency thanks to reduced material waste and less oversprayConclusion:The SATAjet X nozzle sets are the ideal addition to the SATAjet X spray gun. They offer the perfect combination of precision, flexibility and durability to help painters achieve first-class results. Put your trust in SATA and choose the nozzle set that exactly matches your requirements.

Plastic reusable cup 0.6 l QCC, complete (with fine thread) [for SATA KLC, LM 2000, jet 90-2]

Activated carbon cartridge [for SATA activated carbon adsorber]

SATA filter cartridgesOnly use original SATA filter cartridges for your SATA air filter system - quality right from the start.A perfect finish can only be based on flawless preparatory work. At best, dust particles, condensate and compressor oil will still show through when sanding the filler, but often only when applying the top coat. This always results in expensive and time-consuming reworking. It is therefore important to optimise the compressed air at the preparatory workstation. SATA GmbH & Co KG is a global leader in the field of wet coating technologies and wet coating application and supplies sales partners in around 100 countries worldwide in addition to Germany. In addition to the technologically outstanding SATA spray guns, other products such as cup systems, breathing protection systems and compressed air technology make SATA a system provider for users such as vehicle painters, industry, carpenters and painters. As a family-owned company, sustainability is an integral part of SATA's business activities. SATA assumes responsibility in the three dimensions of economy, ecology and social responsibility. The economic dimension implies securing the long-term success of the company - today and for future generations. This success enables the company to be involved in the social dimension. SATA has been supporting various local and global organisations and aid projects for years. At SATA, the ecological dimension includes conserving resources and avoiding waste. SATA therefore uses 100% green electricity and district heating from a nearby biogas plant. SATA also invests in environmentally friendly technologies such as geothermal energy and photovoltaics. For SATA, it is a matter of course to constantly improve and expand its own sustainability measures in order to ensure future success.

Nozzle set SATAminijet 3000 B HVLP 0.8 SR

SATA filter 584/544 spare parts Buy SATA filter 584/544 spare parts now. The SATA filter series of the 500 series (SATA filter 524/544/564/584) is optionally available as a single-stage sintered filter with water and oil separator, as a two-stage combination filter consisting of sintered and fine filter or with an additional sintered activated carbon filter as a three-stage filter unit. Safety now pays off twice! Buy SATA filters from the 500 series now and secure SATA coins! More information at: www.sata.com/filterspecialSATA filter 500 series Higher pollutant absorption (compared to SATA filter 484) thanks to new sintered activated carbon filter Air flow rate with 4 connections approx. 3,800 Nl/min (previously approx. 3,600 Nl/min) SATA filter timer to remind you of the standardised maintenance intervals for all filter cartridges Filter maintenance of all stages only required every 6 months Maintenance-free bayonet lock with haptic and acoustic feedback Higher pollutant absorption (compared to SATA filter 484) due to new sintered activated carbon filter Service life synchronisation: filter maintenance only required every 6 months for all stages Maintenance-free bayonet lock with haptic and acoustic feedback Perfect fit of the fine filter and activated charcoal filter cartridges by insertion - no screwing or additional seals required Easy extension fromu SATA filter 544 to 584 possible thanks to simple plug-in system Maintenance-free sealing elements Line connection optionally possible from the left or right Air flow rate at 6 bar: 3,800 Nl/min SATA filter 584 | The flow-optimised cyclone separator (defined position) minimises pressure loss in the system due to the uniform and directed flow and the longer path of the rotating movement and significantly increases the degree of particle separation. Suitable areas of application: Vehicle painting Industrial applications Carpentry Painting Yacht and boat building SATA filter 584: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter SATA filter 584 with carrying frame: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter for mobile use SATA filter 584 with mobile: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter in aluminium trolley for mobile use SATA filter 544: 2-stage combination filter consisting of pressure reducer, sinter filter and fine filter SATA filter 524: 1-stage sintered filter with pressure reducer SATA filter 564: 1-stage activated carbon filter for retrofitting a SATA filter 544 to SATA filter 584 SATA filter 100 series Specially designed for air treatment at the preparatory work station First-class paintwork requires an impeccable base Required for processing water-based fillers High and reliable separation efficiency due to automatic condensate drain Pressure control valve with pressure gauge Simple installation, robust and low-maintenance SATA filter timerTo remind you to change the filter cartridges regularly, all SATA filters are equipped with a filter timer. It is particularly easy to use: the filter timer activation button is pressed during initial commissioning. This "runs" the time of the maintenance interval of the respective filter. The red colouring of the window indicates the time lapse, which roughly corresponds to the saturation progress. As soon as the window is coloured red, the filter cartridge must be replaced.Filter fineness: Sintered filter SATA filter 500 and 100 series: 5 _m Fine filter SATA filter 500 series: 0.01 _itsonum Fine filter SATA filter 100 series: 0.1 _m

SATA filter 584/544 spare parts Buy SATA filter 584/544 spare parts now. The SATA filter series of the 500 series (SATA filter 524/544/564/584) is optionally available as a single-stage sintered filter with water and oil separator, as a two-stage combination filter consisting of sintered and fine filter or with an additional sintered activated carbon filter as a three-stage filter unit. Safety now pays off twice! Buy SATA filters from the 500 series now and secure SATA coins! More information at: www.sata.com/filterspecialSATA filter 500 series Higher pollutant absorption (compared to SATA filter 484) thanks to new sintered activated carbon filter Air flow rate with 4 connections approx. 3,800 Nl/min (previously approx. 3,600 Nl/min) SATA filter timer to remind you of the standardised maintenance intervals for all filter cartridges Filter maintenance of all stages only required every 6 months Maintenance-free bayonet lock with haptic and acoustic feedback Higher pollutant absorption (compared to SATA filter 484) due to new sintered activated carbon filter Service life synchronisation: filter maintenance only required every 6 months for all stages Maintenance-free bayonet lock with haptic and acoustic feedback Perfect fit of the fine filter and activated charcoal filter cartridges by insertion - no screwing or additional seals required Easy extension fromu SATA filter 544 to 584 possible thanks to simple plug-in system Maintenance-free sealing elements Line connection optionally possible from the left or right Air flow rate at 6 bar: 3,800 Nl/min SATA filter 584 | The flow-optimised cyclone separator (defined position) minimises pressure loss in the system due to the uniform and directed flow and the longer path of the rotating movement and significantly increases the degree of particle separation. Suitable areas of application: Vehicle painting Industrial applications Carpentry Painting Yacht and boat building SATA filter 584: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter SATA filter 584 with carrying frame: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter for mobile use SATA filter 584 with mobile: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter in aluminium trolley for mobile use SATA filter 544: 2-stage combination filter consisting of pressure reducer, sinter filter and fine filter SATA filter 524: 1-stage sintered filter with pressure reducer SATA filter 564: 1-stage activated carbon filter for retrofitting a SATA filter 544 to SATA filter 584 SATA filter 100 series Specially designed for air treatment at the preparatory work station First-class paintwork requires an impeccable base Required for processing water-based fillers High and reliable separation efficiency due to automatic condensate drain Pressure control valve with pressure gauge Simple installation, robust and low-maintenance SATA filter timerTo remind you to change the filter cartridges regularly, all SATA filters are equipped with a filter timer. It is particularly easy to use: the filter timer activation button is pressed during initial commissioning. This "runs" the time of the maintenance interval of the respective filter. The red colouring of the window indicates the time lapse, which roughly corresponds to the saturation progress. As soon as the window is coloured red, the filter cartridge must be replaced.Filter fineness: Sintered filter SATA filter 500 and 100 series: 5 _m Fine filter SATA filter 500 series: 0.01 _itsonum Fine filter SATA filter 100 series: 0.1 _m

SATA filter 584/544 spare parts Buy SATA filter 584/544 spare parts now. The SATA filter series of the 500 series (SATA filter 524/544/564/584) is optionally available as a single-stage sintered filter with water and oil separator, as a two-stage combination filter consisting of sintered and fine filter or with an additional sintered activated carbon filter as a three-stage filter unit. Safety now pays off twice! Buy SATA filters from the 500 series now and secure SATA coins! More information at: www.sata.com/filterspecialSATA filter 500 series Higher pollutant absorption (compared to SATA filter 484) thanks to new sintered activated carbon filter Air flow rate with 4 connections approx. 3,800 Nl/min (previously approx. 3,600 Nl/min) SATA filter timer to remind you of the standardised maintenance intervals for all filter cartridges Filter maintenance of all stages only required every 6 months Maintenance-free bayonet lock with haptic and acoustic feedback Higher pollutant absorption (compared to SATA filter 484) due to new sintered activated carbon filter Service life synchronisation: filter maintenance only required every 6 months for all stages Maintenance-free bayonet lock with haptic and acoustic feedback Perfect fit of the fine filter and activated charcoal filter cartridges by insertion - no screwing or additional seals required Easy extension fromu SATA filter 544 to 584 possible thanks to simple plug-in system Maintenance-free sealing elements Line connection optionally possible from the left or right Air flow rate at 6 bar: 3,800 Nl/min SATA filter 584 | The flow-optimised cyclone separator (defined position) minimises pressure loss in the system due to the uniform and directed flow and the longer path of the rotating movement and significantly increases the degree of particle separation. Suitable areas of application: Vehicle painting Industrial applications Carpentry Painting Yacht and boat building SATA filter 584: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter SATA filter 584 with carrying frame: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter for mobile use SATA filter 584 with mobile: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter in aluminium trolley for mobile use SATA filter 544: 2-stage combination filter consisting of pressure reducer, sinter filter and fine filter SATA filter 524: 1-stage sintered filter with pressure reducer SATA filter 564: 1-stage activated carbon filter for retrofitting a SATA filter 544 to SATA filter 584 SATA filter 100 series Specially designed for air treatment at the preparatory work station First-class paintwork requires an impeccable base Required for processing water-based fillers High and reliable separation efficiency due to automatic condensate drain Pressure control valve with pressure gauge Simple installation, robust and low-maintenance SATA filter timerTo remind you to change the filter cartridges regularly, all SATA filters are equipped with a filter timer. It is particularly easy to use: the filter timer activation button is pressed during initial commissioning. This "runs" the time of the maintenance interval of the respective filter. The red colouring of the window indicates the time lapse, which roughly corresponds to the saturation progress. As soon as the window is coloured red, the filter cartridge must be replaced.Filter fineness: Sintered filter SATA filter 500 and 100 series: 5 _m Fine filter SATA filter 500 series: 0.01 _itsonum Fine filter SATA filter 100 series: 0.1 _m

Nozzle set SATAjet 1000 H RP 2.0

Nozzle set SATAjet 100 B P

Nozzle set SATAjet 3000 ROB RP 0.8 with service life-extending surface finish

SATA filter 584/544 spare parts Buy SATA filter 584/544 spare parts now. The SATA filter series of the 500 series (SATA filter 524/544/564/584) is optionally available as a single-stage sintered filter with water and oil separator, as a two-stage combination filter consisting of sintered and fine filter or with an additional sintered activated carbon filter as a three-stage filter unit. Safety now pays off twice! Buy SATA filters from the 500 series now and secure SATA coins! More information at: www.sata.com/filterspecialSATA filter 500 series Higher pollutant absorption (compared to SATA filter 484) thanks to new sintered activated carbon filter Air flow rate with 4 connections approx. 3,800 Nl/min (previously approx. 3,600 Nl/min) SATA filter timer to remind you of the standardised maintenance intervals for all filter cartridges Filter maintenance of all stages only required every 6 months Maintenance-free bayonet lock with haptic and acoustic feedback Higher pollutant absorption (compared to SATA filter 484) due to new sintered activated carbon filter Service life synchronisation: filter maintenance only required every 6 months for all stages Maintenance-free bayonet lock with haptic and acoustic feedback Perfect fit of the fine filter and activated charcoal filter cartridges by insertion - no screwing or additional seals required Easy extension fromu SATA filter 544 to 584 possible thanks to simple plug-in system Maintenance-free sealing elements Line connection optionally possible from the left or right Air flow rate at 6 bar: 3,800 Nl/min SATA filter 584 | The flow-optimised cyclone separator (defined position) minimises pressure loss in the system due to the uniform and directed flow and the longer path of the rotating movement and significantly increases the degree of particle separation. Suitable areas of application: Vehicle painting Industrial applications Carpentry Painting Yacht and boat building SATA filter 584: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter SATA filter 584 with carrying frame: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter for mobile use SATA filter 584 with mobile: 3-stage combination filter consisting of pressure reducer, sintered filter, fine filter and activated carbon filter in aluminium trolley for mobile use SATA filter 544: 2-stage combination filter consisting of pressure reducer, sinter filter and fine filter SATA filter 524: 1-stage sintered filter with pressure reducer SATA filter 564: 1-stage activated carbon filter for retrofitting a SATA filter 544 to SATA filter 584 SATA filter 100 series Specially designed for air treatment at the preparatory work station First-class paintwork requires an impeccable base Required for processing water-based fillers High and reliable separation efficiency due to automatic condensate drain Pressure control valve with pressure gauge Simple installation, robust and low-maintenance SATA filter timerTo remind you to change the filter cartridges regularly, all SATA filters are equipped with a filter timer. It is particularly easy to use: the filter timer activation button is pressed during initial commissioning. This "runs" the time of the maintenance interval of the respective filter. The red colouring of the window indicates the time lapse, which roughly corresponds to the saturation progress. As soon as the window is coloured red, the filter cartridge must be replaced.Filter fineness: Sintered filter SATA filter 500 and 100 series: 5 _m Fine filter SATA filter 500 series: 0.01 _itsonum Fine filter SATA filter 100 series: 0.1 _m

SATAjet 1000 B nozzle set SATAjet 1000 B nozzle set for your SATAjet 1000 B. The SATAjet 1000B is a universal, low-cleaning and ergonomic spray gun. It is the all-rounder among the gravity-feed cup spray guns. Thanks to the wide range of nozzles and diverse accessories such as pressure and agitator cups as well as extensions, it is ideal for processing a wide variety of materials.Advantages All-rounder: Thanks to the wide range of nozzles and diverse accessories, a wide variety of materials can be processed with ease Simplified cleaning: The smooth surface of the gun body makes cleaning easier for the user QC-Quick Change thread: Quick and easy air nozzle change with just 1.5 turns Also for hard-to-reach areas: Thanks to the available extensions, hard-to-reach or narrower and deeper areas are no problem with the SATAjet 1000 B Two ways to the perfect result: HVLP and RP HVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Suitable areas of application Industrial applications Carpentry Painting trade Yacht and boat building Downloads Paint data sheet metric Declaration of conformity

Nozzle set SATAjet 100 B F HVLP 1.7

Nozzle set SATAjet 100 B F HVLP 1.7

SATAjet 5000 B nozzle set Nozzle set Use the original SATAjet 5000 B nozzle set for your 5000 B spray gun with paint connection.SATAjet® 5000 B With the SATAjet® 5000 B Standard, painters can adjust the inlet pressure and the painting distance according to the paint used, the climatic conditions and their working style - and achieve perfect results in every situation. The ergonomic spray gun was developed in collaboration with the Porsche Design Studio - so it fits perfectly in the hand. Robust yet lightweight - with ergonomic adjustment elements, the SATAjet 5000 B ensures comfortable working.Flexible. Ergonomic. Easy to use.Advantages: Flexible application: Optimised nozzle concept for a wide range of spray distances and inlet pressures Ergonomic design: Pleasant and compact handle shape, combined with easy-to-use adjustment elements Easy cleaning: PerloxalTMu surface to improve corrosive properties and for even easier cleaning and maintenance Quick assembly: Securely positioned roller makes the paint needle easy, safe and quick to assemble Easy adjustment: Optimised round/wide jet adjustment with half a turn Two ways to the perfect result: HVLP and RP HVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive. transfer rates of 65 % required by the VOC directive. The following tools are available to the painter to determine the right nozzle: SATA Du_senfinder App: www.sata.com/nozzlefinder Suitable areas of application Industrial applications Carpentry Painting Yacht and boat building

SATAjet 1000 B nozzle set SATAjet 1000 B nozzle set for your SATAjet 1000 B. The SATAjet 1000B is a universal, low-cleaning and ergonomic spray gun. It is the all-rounder among the gravity-feed cup spray guns. Thanks to the wide range of nozzles and diverse accessories such as pressure and agitator cups as well as extensions, it is ideal for processing a wide variety of materials.Advantages All-rounder: Thanks to the wide range of nozzles and diverse accessories, a wide variety of materials can be processed with ease Simplified cleaning: The smooth surface of the gun body makes cleaning easier for the user QC-Quick Change thread: Quick and easy air nozzle change with just 1.5 turns Also for hard-to-reach areas: Thanks to the available extensions, hard-to-reach or narrower and deeper areas are no problem with the SATAjet 1000 B Two ways to the perfect result: HVLP and RP HVLP: Extra economical - HVLP spray guns achieve particularly high transfer rates with their low-pressure technology. RP: Extra fast - RP spray guns stand for maximum working speed with optimised high-pressure technology and low overspray. Both variants can be used very flexibly, fulfil the highest demands on the painting result and clearly exceed the transfer rates of 65 % required by the VOC directive.Suitable areas of application Industrial applications Carpentry Painting trade Yacht and boat building downloads Paint data sheet metric Declaration of conformity

Powerful AirCombi / High-Pressure Piston Pump – including Spray Gun, Nozzle & Hose Package The P2 Piston Pump 30:1 Spraypack is the professional solution for AirCombi and AirCoat applications with higher material pressure. It delivers a consistent material flow with minimal pulsation – for premium-quality surface finishes. The system is supplied ready to spray, including complete equipment for immediate use. Scope of Delivery M2 AirCombi Plus Spray Gun AirCombi Nozzle (11/40) Hose package (material and air hose) Suction hose High-pressure material regulator for constant material flow High-pressure filter, air filter, and gun air filter Sturdy trolley for mobile use Key Advantages Constant output and minimized pulsation for perfect surfaces Ready-to-spray – fully assembled and immediately operational Flexible with a wide range of materials: paints, stains, varnishes, and impregnations Robust design for long-lasting, mobile operation Fast delivery & promotional price – available immediately Also searched as / Alternative to Frequently searched as an alternative to Graco Dura-Flo 30:1, Graco Merkur 23:1, Graco Dura-Flo 23:1, WAGNER Puma 23:1, WAGNER EvoMotion 20-25, SAMES KREMLIN 23C25 Airmix®, Binks Maple 23, Haskel Piston Pump 23:1, MAXIMATOR HD Series, WIWA Duplex 23:1, WOMA High-Pressure Pump, Anest Iwata 23:1 AirCombi System, or DeVilbiss AGX 23:1. The P2 30:1 Spraypack stands out as a powerful 30:1 piston pump and a cost-effective alternative to the brands listed above – ready to spray, available immediately, and with a best price guarantee. Alternative to Graco Merkur 23:1 (AirCombi / AirCoat systems) Alternative to Graco Dura-Flo 23:1 (process and production coating) Alternative to WAGNER Puma 23:1 (AirCombi / high-pressure pump) Alternative to WAGNER EvoMotion 20-25 (automatic material supply) Alternative to SAMES KREMLIN 23C25 Airmix® (fine atomization with high output) Alternative to Binks Maple 23 (industrial AirCombi piston pump) Alternative to WIWA Duplex 23:1 (double-stroke piston pump for paints and stains) Alternative to MAXIMATOR HD Series 23:1 (high-pressure industrial pumps) Alternative to Haskel Piston Pump 23:1 (process and air amplifier technology) Alternative to WOMA Piston Pump 23:1 (high-pressure cleaning / coating) Alternative to Anest Iwata AirCombi System 23:1 (premium surface coating) Alternative to DeVilbiss AGX 23:1 (AirCombi / high-pressure automation pump) Promotion Notice: Now at a reduced price – ready for dispatch within 1–3 working days. Questions? Our team will be happy to advise you on nozzle sizes, filters & hoses. Contact us now!

Powerful AirCombi / High-Pressure Piston Pump – including Spray Gun, Nozzle & Hose Package The P2 Piston Pump 23:1 Spraypack is the professional solution for AirCombi and AirCoat applications with high material pressure. It delivers a consistent material flow with minimal pulsation – ensuring premium surface quality. The system is supplied ready to spray, including complete equipment for immediate use. Scope of Delivery M2 AirCombi Plus Spray Gun AirCombi Nozzle (11/40) Hose package (material and air hose) Suction hose High-pressure material regulator for constant flow High-pressure filter, air filter, and gun air filter Sturdy trolley for mobile use Key Advantages Constant output and minimized pulsation for perfect surfaces Ready-to-spray – fully assembled and immediately operational Suitable for a wide range of materials such as paints, stains, varnishes, and impregnations Robust construction for long-lasting, mobile use Fast delivery & promotional price – available immediately Also searched as / Alternative to Frequently searched as an alternative to Graco Dura-Flo 23:1, Graco Merkur 23:1, WAGNER Puma 23:1, WAGNER EvoMotion 20-30, SAMES KREMLIN 23C25 Airmix®, Binks Maple 23, Haskel Piston Pump 23:1, MAXIMATOR Piston Pump 23:1, WIWA Duplex 23:1, Anest Iwata 23:1 AirCombi System, DeVilbiss AGX 23:1, Codinter 23:1 Piston Pump Series, or WIT W12000P 30:1. The P2 23:1 Spraypack stands out as a powerful 23:1 piston pump and a cost-effective alternative to the brands listed above – ready to spray, immediately available, and with a best price guarantee. Alternative to Graco Dura-Flo 23:1 (AirCombi / AirCoat systems) Alternative to Graco Merkur 23:1 (industrial piston pump) Alternative to WAGNER Puma 23:1 (AirCombi / high-pressure pump) Alternative to WAGNER EvoMotion 20-30 (high-pressure piston pump) Alternative to SAMES KREMLIN 23C25 Airmix® Alternative to Binks Maple 23 (industrial AirCombi piston pump) Alternative to Haskel Piston Pump 23:1 Alternative to MAXIMATOR Piston Pump 23:1 Alternative to WIWA Duplex 23:1 Alternative to Anest Iwata 23:1 AirCombi System Alternative to DeVilbiss AGX 23:1 Alternative to Codinter 23:1 Piston Pump Series Alternative to WIT W12000P 30:1 Promotion Notice: Now at a reduced price – ready to ship within 1–3 working days. Questions? Our team will be happy to advise you on nozzle sizes, filters & hoses. Contact us now!