Sagola 3300 GTO Gravity Spray Gun with TECH Air Cap and 1.30 mm Nozzle (stainless steel) incl. RC2 Air Flow Regulator
Sagola 3300 GTO Gravity Spray Gun with TECH Air Cap and 1.30 mm Nozzle (stainless steel) incl. RC2 Air Flow Regulator
€279.65
% Regular price: €451.01 (37.99% saved)
Currently not on stock.
Sagola 3300 GTO Gravity Spray Gun with TECH Air Cap and 1.30 mm Nozzle (stainless steel) incl. RC2 Air Flow Regulator
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Sagola 3300 GTO Gravity Spray Gun
- TECH air cap
- 1.30 mm Stainless Steel Needle & Nozzle Kit
- 650 ml gravity cup with anti-drip system
- RC2 air flow regulator with analogue pressure gauge
Sagola 3300 GTO Gravity Spray Gun
The Sagola 3300 GTO is the versatile gravity spray gun for basecoat, clear coat, primer and gun filler. The forged aluminium body with soft-touch finish is light and robust; there are no seals or plastic inserts in the fluid area.
Six aluminium air caps cover the whole refinish spectrum: TECH and EVO (EPA high transfer) for fine atomisation and large fans, HVLP for even metallic effects, EPA for primers, and 64S and 62S for gun fillers on large surfaces. Sagola recommends 1.0–1.4 mm for finishes, 1.6–1.8 mm for primers and 2.0–2.8 mm for gun fillers.
At a glance
- One-piece self-adjusting packing gland: easy to remove for thorough cleaning
- “Soft Flow” air valve: smooth trigger, no pressure drop between the first and second trigger stage
- Stainless steel trigger: ergonomic, reduces fatigue
- Paint approvals: approved by leading paint brands
Versions at a glance
| Air cap / nozzle | Recommended for | Manufacturer order number |
|---|---|---|
| EVO / 1.30 mm | wet-on-wet primers | 10141559 |
| EVO / 1.40 mm | wet-on-wet primers | 10141560 |
| EVO / 1.60 mm | – | PG10141561 |
| HVLP / 1.40 mm | solvent basecoats | PG10141555 |
| HVLP / 1.60 mm | sanding primers | 10141556 |
| HVLP / 1.80 mm | primers | 10141557 |
| EPA / 1.40 mm | – | PG10141562 |
| EPA / 1.60 mm | sanding primers | 10141563 |
| EPA / 1.80 mm | primers | 10141564 |
| 64S / 2.20 mm | gun fillers | 10141572 |
| 62S / 2.80 mm | gun fillers | 10141574 |
| RC2 Air Flow Regulator with Analogue Pressure Gauge | Accessory | 40000335 |
| Fluid Mini-Filters for 650 ml Plastic Gravity Cup, Pack of 10 | Accessory | 56418438 |
| Fluid Mini-Filters for 1 l Aluminium Gravity Cup, Pack of 10 | Accessory | 56418003 |
| TECH / 1.20 mm | – | PG10141550 |
| TECH / 1.30 mm | waterborne basecoats and quick-drying clear coats | 10141551 |
| TECH / 1.40 mm | solvent basecoats, UHS clear coats and single stage | 10141552 |
| HVLP / 1.20 mm | – | PG10141553 |
| HVLP / 1.30 mm | waterborne basecoats | 10141554 |
| TECH / 1.20 mm | – | PG10141566 |
| TECH / 1.30 mm | waterborne basecoats and quick-drying clear coats | PG10141567 |
| TECH / 1.40 mm | solvent basecoats, UHS clear coats and single stage | PG10141568 |
| HVLP / 1.20 mm | – | PG10141569 |
| HVLP / 1.30 mm | waterborne basecoats | PG10141570 |
| TECH / 1.30 mm | waterborne basecoats and quick-drying clear coats | 10141551 |
Good to know
- Clean with brushes and a suitable cleaner only – never use metal tools on the bores.
- Lubricate the moving parts of the gun after every cleaning (Sagola grease 56418589).
- Product number: SW10073.1
- Manufacturer: Sagola
Technical details
This version
| Manufacturer order number | 10141551 |
| Air cap | TECH |
| Needle & nozzle kit | 1.30 mm, stainless steel |
| System | EPA (high transfer) |
| Air consumption at 2 bar | 285 l/min |
| Recommended pressure | 1.8–2.2 bar |
| Fluid output | 169 g/min |
| Fan size | 305 mm |
| Spray distance | 18–20 cm |
| Recommended for | waterborne basecoats and quick-drying clear coats |
| Air flow regulator | RC2 air flow regulator with analogue pressure gauge |
Sagola 3300 GTO – general
| Manufacturer order number | per version – see table “Versions at a glance” |
| Manufacturer | SAGOLA S.A., Vitoria-Gasteiz (Spain) |
| Cup | 650 ml, with anti-drip system |
| Weight with cup | 662.4 g |
| Weight without cup | 474.8 g |
| Dimensions without cup | 18.2 × 1.9 × 17.8 cm |
| Air inlet | BSP 1/4″ male |
| Recommended working pressure | 2 bar |
| Average sound pressure level | 80 dB |
| Materials in contact with the product | anodised aluminium, stainless steel, PTFE, POM, nylon |
| Air caps | TECH, HVLP, EPA, EVO, 64S, 62S |
| Nozzle sizes | 1.20–2.80 mm |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Downloads
of reviews
Average rating of 0 of 5 stars
Register