Mirka Polarshine 10 polish
Price excl. VAT
Mirka Polarshine E3 glass polish - 1 litre
Price excl. VAT
Mirka Polarshine 12 Black polish - 5L/1.32 gal
Price excl. VAT
Mirka Polarshine 5 Finishing Compound
Price excl. VAT
Mirka Polarshine 15 polish
Price excl. VAT
Mirka Polarshine 12 polish - 1L
Price excl. VAT
Mirka Polarshine 35 POLISHING COMPOUND - 2.8 L/0.74 GAL
Price excl. VAT
Mirka - Abrasives and polishes | Abrasives | Abranet Ace Ø 77 mm Grip P220
Price excl. VAT
Mirka – Abrasives & Polishes | Finishing Products | Polarshine 25 Polish 17L
Price excl. VAT
Mirka - Abrasives & Polishes | Abrasives | Gold Ø 225 mm Grip 27-hole P320
Price excl. VAT
Mirka - Abrasives & Polishes | Abrasives | Galaxy Ø 150 Grip Multifit Mix
Price excl. VAT
Mirka - Abrasives & Polishes | Abrasives | Caratflex 230 x 280 mm P100
Price excl. VAT
Mirka Polarshine 8 polish
Price excl. VAT
Mirka – Abrasives & Polishes | Finishing Products | Pro Iridium 1250 Polish 1L
Price excl. VAT
Mirka – Abrasives & Polishes | Finishing Products | Polarshine 35 Polish 17L
Price excl. VAT
Mirka - Abrasives & Polishes | Finishing Products | Pro Iridium 1250 Polish 5L
Price excl. VAT
Mirka - Abrasives & Polishes | Abrasives | Iridium™ Ø 225 mm Grip 9 holes Styro 60
Price excl. VAT
sia Abrasives siachrome – Polishing Compound – siachrome PEARL 1 litre, paint sealant
Price excl. VAT
Polishes & compounds – controlled removal from correction to finishing
Polishes and compounds are selected according to surface condition and the required processing result. Coarser correction and fine finishing require different products or combinations. Terms such as Cut, Finish and One-Step offer useful guidance but do not replace material approval. Check paint, gelcoat or another substrate along with machine, pad and recommended preparation.
Start with sanding marks and polishing objective
Establish which scratch pattern or defects need treatment. A polish can act only within its intended application and the available surface layer. A stated preceding sanding stage must be understood in relation to product and process. Do not automatically choose the strongest compound if a less abrasive arrangement already achieves the objective.
Check substrate compatibility separately
A recommendation for gelcoat cannot automatically be transferred to every automotive clearcoat or plastic. Fresh and fully cured coatings also differ in permissible processing conditions. Follow technical product information and coating manufacturer requirements. With an unknown coating system, a suitable preliminary test is particularly important.
Follow pad combination and processing instructions
A compound's effect results from its interaction with pad, motion and guidance. Follow recommended dosage and operating range; more product does not automatically improve results. Use separate working materials for different polishing stages. Loaded or contaminated pads must be cleaned or replaced as instructed.
Inspect results and store the product correctly
Remove residues by a surface-approved method and inspect the finish under suitable lighting. Observe preparation, storage and shelf-life instructions. For sensitive subsequent processes, also check product features such as declared silicone-free formulation; these must not be inferred from general workshop suitability.
Manufacturers & system selection
- Mirka – Check polish, machine and pad as a coordinated combination for the particular substrate.
Guides & resources
Mirka Polarshine 25 on gelcoat and topcoats
Application-specific shop guide; do not apply universally to all painted surfaces.
Learn moreFrequently asked questions: polishes & compounds
What does One-Step mean for a polish?
It describes an intended approach in which one product may cover several requirements depending on substrate and objective. It does not guarantee that every surface needs no preparation or additional finishing.
Can a coarse compound always remove deep scratches?
No. Workability depends on defect depth and available layer thickness. Excessive removal can damage the substrate; not every defect can be corrected by polishing.
Does polish colour indicate a fixed cut grade?
No. Colour and stage markings are manufacturer- or system-specific. Compare the stated application rather than product colour alone.
Customer feedback
Enquire about polishes & compounds now
Tell us the substrate, existing sanding stage and polishing machine used. This helps determine a suitable compound process.
Enquire now