Mirka: robotic sanding and polishing tools
Processing heads, interfaces and system integration information.
Learn moreRobotic sanders – suitable processing heads for automated material removal
Robotic sanders are processing tools for integration into an automated installation. Select by sanding motion, contact area and material. Interaction with robot, controller, workholding and dust capture is decisive. A head provides defined functions; a finished process requires professional integration and trials on the actual component.
Choose motion and contact area
Different head and pad concepts suit surfaces, contours and local reworking. Choose according to access and required scratch pattern. Diameter and stroke influence the process but are not the only criteria. Check approved abrasives and supports for the specific tool.
Distinguish speed control from contact force
Controlled tool speed does not equal controlled contact pressure. Clarify separately how contact conditions are established and maintained. The installation may need extra functions or components. Consider path, feed, orientation and tolerances alongside tool behaviour.
Check mechanical and electrical integration
Compare flange, tool mass and geometry with robot requirements. Power, control connection and status signals must fit the architecture. Check manufacturer-specified connections and extras. Hoses and cables must allow movement without impermissible pulling or bending.
Plan dust capture and abrasive changes
The head needs material-appropriate extraction and consumables. Define wear detection and replacement timing. Automatic changes require intended components and sequences. Plan maintenance access, safe shutdown and scratch-pattern inspection too.
Manufacturers & system selection
- Mirka – Select robotic tools and integration components by interfaces and the planned overall process.
Guides & resources
Mirka: robotic sanding head
Specific tool with technical integration details; model names may be updated.
Learn moreFrequently asked questions: robotic sanders
Is contact pressure always controlled?
No. Speed and force control are different. Check whether contact-force control exists or is additionally required in the specific system.
Can I use a robot head as a hand sander?
Only if expressly intended by the manufacturer. Robotics tools are designed for integration and not automatically approved as handheld machines.
Is automatic disc changing standard?
Not automatically. Change equipment, stations and controls must be specified in the actual supply and integration scope.
Customer feedback
Enquire about robotic sanders now
Specify geometry, material, scratch pattern and robot platform. This enables a suitable version enquiry.
Enquire now