Mirka: selecting abrasives
Manufacturer overview of abrasive shapes, backings and intended applications.
Learn more
Discount
Discount
Discount
Finixa abrasive fleece roll micro fine - gold - 100mm x 10m
Price excl. VAT
Discount
Discount
Mirka ABRALON 150mm Grip 3000, 20/pack
Variants
€8.54*
€51.50*
Price excl. VAT
Discount
Discount
Mirka ABRALON 125mm Grip 180, 20/pack
Variants
€37.93*
€45.50*
Price excl. VAT
Discount
Discount
Mirka SANDING SPONGE 100x70x28 100/100 DIY
Variants
€8.50*
€12.17*
Price excl. VAT
Discount
Discount
Discount
Discount
Mirka GOLDFLEX SOFT 115x125mm perf. roll P320, 200/roll
Price excl. VAT
Discount
Discount
Mirka MIRLON TOTAL 115x230mm, 25/pack
Price excl. VAT
Discount
Mirka - Accessories | Other accessories | Mirka® oil pads Ø 150 mm Px10 pieces
Price excl. VAT
Discount
Discount
Discount
Discount
Discount
Mirka Mirlon Soft R/G 6/pack
Variants
€13.88*
€15.00*
Price excl. VAT
Discount
Discount
Mirka - Accessories | Other accessories | Mirka® oil pads 115 × 140 mm Px10 pieces
Price excl. VAT
Discount
sia Abrasives 2951 siatur h – siasoft sanding pad – 180
Price excl. VAT
Discount
Non-woven abrasives, pads & sponges – conformable abrasives for contours and matting
Non-woven abrasives, sanding pads and sanding sponges complement rigid abrasives where curves, recesses and profiled components need controlled processing. Depending on the version, they suit matting, refining and preparing surfaces. This category concerns materials with their own abrasive action; pure polishing pads without abrasive grit are selected according to a different principle of use.
Distinguish non-woven from foam-backed products
Non-woven abrasives have an open fibre structure containing abrasive grains. A sanding sponge or foam-backed sanding pad instead combines a yielding support with an abrasive surface. Both concepts can adapt to contours, but are not automatically suitable for the same removal task. Compare product construction and the manufacturer's stated application.
Do not judge fineness by colour alone
Colours and terms such as fine or ultrafine are helpful within a product range. Their meaning is not consistent across different manufacturers and material families, however. Choose the version according to the intended application and a test area. A non-woven finish must not be equated with the scratch pattern of a particular paper grit without checking.
Work profiles without oversanding edges
Match the abrasive's shape and size to the contour rather than forcing the material into narrow areas with high pressure. Check the remaining coating thickness particularly on protruding edges. The objective may be even matting; removing deep defects is a different task and may require another sanding method.
Wet or dry process and cleanliness
Some non-woven and foam products are designed for wet and dry applications; others have narrower operating limits. The individual product version remains decisive. Remove residue by a suitable method before the next stage and stop using damaged or heavily contaminated pads. Machine use also requires approval for the tool.
Manufacturers & system selection
- Mirka – Mirlon Total and Abralon represent different non-woven and foam abrasive concepts respectively. The specific version determines the intended use.
- sia Abrasives – additional abrasive ranges in the brand section. Compare the backing, attachment and application for each product.
- Finixa – a complementary product selection for surface preparation. Suitability for a particular application is determined by the relevant product data.
Guides & resources
Which abrasive for which application?
Further guidance in the shop to help you distinguish between types of abrasive.
Learn moreFrequently asked questions: non-woven abrasives, pads & sponges
Is a sanding pad the same as a polishing sponge?
No. A pad with abrasive action contains abrasive grains or a corresponding coating. A polishing pad usually acts as a carrier for a suitable polish. The product description must clearly state the intended purpose.
Can I remove deep scratches with non-woven abrasives?
Non-woven abrasives are often used for matting and surface refinement. They are not universally the right choice for deep defects. First assess the defect depth and permissible material removal.
Do identical pad colours always indicate the same fineness?
No. Colour coding depends on the manufacturer and range. Compare the precise designation and approved application.
Customer feedback
Enquire about non-woven abrasives, pads & sponges now
Describe the contour, substrate and required matting or finish appearance. We will help you choose a suitable abrasive material.
Enquire now