Sagola Classic Pro XD Gravity Spray Gun with HVLP Air Cap and 1.60 mm Nozzle (stainless steel)
€187.33
% Regular price: €220.00 (14.85% saved)€157.42*
Price excl. VAT
Currently not on stock.
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Sagola Classic Pro XD Gravity Spray Gun
- HVLP air cap
- 1.60 mm Stainless Steel Needle & Nozzle Kit
- 650 ml gravity cup with anti-drip system
Sagola Classic Pro XD Gravity Spray Gun
The Sagola Classic Pro XD is the rugged gravity spray gun with EPA and HVLP high transfer air caps and “metal to metal” technology – no seals between the components in the fluid area.
The 21 EPA air cap combines a high transfer rate with fine atomisation at low air consumption, the HVLP cap meets strict environmental regulations at high application speed. The 25 and 36 caps are designed for high-build fillers, the 28 cap for gun fillers on large surfaces.
At a glance
- 21 EPA air cap: 225 l/min at 2 bar, 1.5–2.0 bar
- HVLP air cap: 355 l/min at 2 bar, spray distance 12–15 cm
- Filler air caps 25 / 36 / 28: 2.00 to 2.80 mm for thick materials
- 650 ml cup: with anti-drip system
Versions at a glance
| Air cap / nozzle | Recommended for | Manufacturer order number |
|---|---|---|
| 21 EPA / 1.40 mm | finishes | 10141620 |
| 21 EPA / 1.60 mm | sanding fillers | 10141623 |
| 21 EPA / 1.80 mm | sanding fillers | 10141625 |
| HVLP / 1.40 mm | finishes | 10141621 |
| HVLP / 1.60 mm | sanding fillers | 10141624 |
| HVLP / 1.80 mm | sanding fillers | 10141626 |
| 25 / 2.00 mm | high-build fillers | 10141627 |
| 36 / 2.50 mm | high-build fillers | 10141629 |
| 28 / 2.80 mm | gun fillers | 10141630 |
| RC2 Air Flow Regulator with Analogue Pressure Gauge | Accessory | 40000335 |
| Fluid Filters for 650 ml Plastic Gravity Cup, Pack of 10 | Accessory | 56418017 |
| HVLP / 2.50 mm | – | PG10141631 |
| HVLP / 1.60 mm | sanding fillers | 10141624 |
| 21 EPA / 1.40 mm | finishes | 10141620 |
Good to know
- Clean with brushes and a suitable cleaner only – never use metal tools on the bores.
- Lubricate the moving parts of the gun after every cleaning (Sagola grease 56418589).
- Product number: SW10076.1
- Manufacturer: Sagola
- Weight: 1 kg
- Length: 243 mm
- Width: 135 mm
- Height: 143 mm
Technical details
This version
| Manufacturer order number | 10141624 |
| Air cap | HVLP |
| Needle & nozzle kit | 1.60 mm, stainless steel |
| System | HVLP |
| Air consumption at 2 bar | 355 l/min |
| Recommended pressure | 1.5–2.0 bar |
| Fluid output | 202 g/min |
| Fan size | 250 mm |
| Spray distance | 12–15 cm |
| Recommended for | sanding fillers |
Sagola Classic Pro XD – general
| Manufacturer order number | per version – see table “Versions at a glance” |
| Manufacturer | SAGOLA S.A., Vitoria-Gasteiz (Spain) |
| Cup | 650 ml, with anti-drip system |
| Weight with cup | 665 g |
| Weight without cup | 480.8 g |
| Dimensions without cup | 17.9 × 1.9 × 17.7 cm |
| Air inlet | BSP 1/4″ male |
| Recommended working pressure | 2 bar |
| Air caps | 21 EPA, HVLP, 25, 36, 28 |
| Nozzle sizes | 1.40–2.80 mm |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Downloads
Register