SATAjet X 5500 RP PHASER nozzle 1.3 I RPS multipurpose cup 0.6 l / 0.9 l (1x each)

SATAjet®X 5500 PHASER Standard I nozzle with RPS 0.6/0.9l cup

SATAjet®X 5500 PHASER Standard I-nozzle with RPS 0.6/0.9l cup - Special. Elegant. Unusual design. The PHASER spray gun was developed with its special look, special materials and a special concept for your very special projects. The unusually elegant design was created in collaboration with the Porsche Design Studio. Technically, the PHASER is identical to the top model SATAjet X 5500. It has the same nozzle concept and all the other impressive features that make the SATAjet X 5500 an outstanding spray gun.

Advantages
Exclusive spray gun - created in collaboration with the Porsche Design Studio Unusual design - combined with high-quality materials and detailed solutions Revolutionary, economical, quiet, logical - technically identical to the top model SATAjet X 5500 Sophisticated paint systems and new processing recommendations create new possibilities, but also present the user with challenges. The SATAjet® X 5500 Standard I nozzle with cup/rotary joint sets a new standard for the future with the new X nozzle system.

The nozzle system is simple and easy to understand:
The two proven technologies - HVLP and RP - remain in place. There are "I" and "O" nozzle sets for both technologies. The painter can choose between two spray patterns and thus the spray that suits him best.

Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can be dispensed with. In addition, the volume of this whisper nozzle has been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting.

• Revolutionary: The atomisation of the X nozzles sets new standards
• Noticeably quieter: Whisper nozzleTM with optimised flow geometry, reduced noise in the relevant frequency ranges
• Customised: Suitable for every application requirement, such as properties of the paint system, climatic conditions or painting habits (working speed/control)
• Precise: Optimised material distribution for more even and finer atomisation in both spray variants
• Low maintenance: No air distributor ring required, making cleaning easier and quicker
• Logical: Constant jet dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughput
• Efficient: Considerable material savings of up to 15% are possible with the same application method

The revolutionary nozzle system

The two proven technologies - namely HVLP and RP - remain unchanged. There are "I" and "O" nozzle sets for each. With increasing nozzle size in the respective technology (HVLP/RP) and jet shape(onsa "I" or "O"), the material ejection also increases constantly - this means that the respective jet height and width remain the same across the entire spectrum. The user therefore has a transparent and logical system that gives him clear and structured decision-making options. The "I" nozzles have an elongated jet shape with a short run-off zone and a drier jet core, which is ideal for a lower application speed and offers maximum control during painting. The coating thickness per spray pass is slightly lower compared to an "O" nozzle with the same nozzle size.

• Stretched jet shape with little run-off zone
• Improved control during application
• Reduced layer application per spray pass compared to the previous or "O" nozzle

The "O" nozzles have an oval jet shape with a larger run-off zone and a wet jet core, which is suitable for higher application speeds, but offers slightly less control during painting. The coating thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.

• Oval jet shape with larger run-off zone
• Wet jet core for a higher working speed
• Slightly higher coating application per spray pass than with the "I" nozzle

The following tools are available to the painter to determine the right nozzle:

• SATA website: www.sata.com/SATAjetX5500
• SATA nozzle finder app: www.sata.com/nozzlefinder

Suitable areas of application

• Industrial applications
• Carpentry
• Painting
• Yacht and boat building

Technically identical to the SATAjet X 5500 HVLP and RP variants: Extra economical with low pressure or extra fast with optimised high pressure.

downloads

• Paint data sheet

Accessories

• To the spare parts & accessories