Manufacturer no.:
AC1000
ProMix PD2K automatic low-pressure metering system, standard, with 70 cm³ resin pump and 35 cm³ hardener pump
Price on request
Ready for shipping in 5-8 Werktage
Also interesting
Product information
100% positive displacement technology for accurate mix ratios and consistent performance. ProMix PD technology mixes components just before the spray gun, significantly reducing the purge area, ideal for materials with a short pot life. This enables faster colour changes, reduced material usage and lower disposal costs.
- Up to 80% less purge waste compared to the most efficient conventional dispensing systems
- Faster colour changes and less material to purge means less waste and less downtime
- It comes to a complete stop when pressurised, ensuring consistent mixing results (accurate to 1%).
- Dispense epoxy and urethane with ONE system
- Field serviceable in less than 20 minutes – no costly factory rebuild like gear pumps
| Air inlet size (inches): | 3/8 |
|---|---|
| Air inlet thread type: | NPT |
| Applicator type: | Automatically |
| Component type: | Two-component |
| Dosage type: | Automatically Electronic |
| Dosing unit type: | Automatically |
| Frequency (Hz): | 50/60 |
| Gender of the air inlet thread: | Internal thread |
| Gun activation: | Automatically |
| Material type: | multi-component |
| Maximum mixing ratio: | 50:1 |
| Maximum number of colours: | Up to 30 |
| Maximum operating pressure (MPa): | 0.7 |
| Maximum operating pressure (kPa): | 700 |
| Maximum operating pressure (psi): | 100 |
| Measurement type: | Volume counter |
| Minimum mixing ratio: | 0.1:1 |
| Mixing accuracy (%): | 1 |
| Model: | ProMix |
| Number of colour valves: | n.a. |
| Number of hardeners: | up to 4 |
| Number of resin colours: | Up to 30 |
| Permissible operating pressure (bar): | 7 |
| Print type: | Low pressure |
| Series: | PD2K |
| Sink type: | solvent |
| Size of the air inlet (cm): | 9,525 |
| Size of the air inlet (mm): | 9,525 |
| Supply voltage: | Electric |
| Type: | Dosing system |
| Wetted material: | Stainless steel, tungsten carbide, perfluoroelastomer, PTFE, PPS, UHMWPE |
More information
- Product number: 1032720
- Manufacturer: Graco
- EAN: 00633955094345
- Weight: 115.062 kg
- Length: 770 mm
- Width: 870 mm
- Height: 1870 mm
Reviews
Register
