Elcometer 456 Right-angle mini probe, ferrous (F), Scale 0.5 (0–500 µm)
€986.24
€828.77*
Price excl. VAT
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Right-angle mini probe Elcometer 456 (T456CFM3R90A)
- Test certificate
Elcometer 456 Probes Scale 0.5 – Measuring Range 0–500 µm
The Scale 0.5 mini probes measure thin coatings from 0 to 500 µm with high resolution – where standard probes cannot reach: in bores, grooves, on small parts and edges. Available straight, right-angled or 45° angled, with probe lengths from 45 to 400 mm.
All probes are fully interchangeable: simply plug them into the Elcometer 456 for separate probes, the gauge recognises the probe automatically. Every probe is supplied with a test certificate.
Which probe fits my gauge?
- Ferrous probes (F) fit Elcometer 456 ferrous (F) and FNF gauges
- Non-ferrous probes (N) fit Elcometer 456 non-ferrous (NF) and FNF gauges
- FNF combination probes fit Elcometer 456 FNF gauges only
Probe types
- Straight probe: standard for flat and slightly curved surfaces
- Scan probe: for fast measurement of large areas, replaceable wear cap; scan mode with Elcometer 456 Model T
- 90° and mini probes: for bores, pipes, grooves and tight spots
- PINIP™ probe: integral probe without cable, plugs directly into the gauge
- Armoured cable / sealed / waterproof: for rough sites, wet environments and underwater measurement
Working height and minimum sample diameter of each probe are listed in the “Technical details” tab of each version.
Other measuring ranges
Scale 1 (0–1,500 µm) · Scale 2 (0–5 mm) · Scale 3 (0–13 mm) · Scale 6 (F: 0–25 mm, N: 0–30 mm)
| Item type: | Sonde |
|---|---|
| Probe angle: | 90 Grad |
| Probe length: | 45 mm |
| Probe type: | MINI |
| Scale: | 0,5 |
- Product number: 1028176
- Manufacturer: Elcometer
- Weight: 0.173 kg
- Length: 30 mm
- Width: 170 mm
- Height: 110 mm
Technical details
This version
| Manufacturer order number | T456CFM3R90A |
| Probe type | Right-angle mini probe |
| Substrate | ferrous (F) |
| Measuring range (Scale 0.5) | 0–500 µm |
| Accuracy | ±1–3 % or ±2,5 µm (±0,1 mil), whichever is greater |
| Resolution | 0,1 µm (0–100 µm), 1 µm (100–500 µm) |
| Probe length | 45 mm |
| Working height | 16 mm |
| Min. sample diameter | 3 mm |
| Fits | Elcometer 456 ferrous (F) or FNF |
Elcometer 456 probes Scale 0.5 – general
| Scale | 0.5 |
| Measuring range | 0–500 µm (0–20 mils) |
| Accuracy | ±1–3 % or ±2,5 µm (±0,1 mil), whichever is greater |
| Resolution | 0,1 µm (0–100 µm), 1 µm (100–500 µm) |
| Compatible with | Elcometer 456 for separate probes (Model B, S, T) |
| Max. substrate temperature | 80 °C; separate ferrous probes 150 °C; high-temperature PINIP™ 250 °C (keep measuring time short) |
| Certificate | Test certificate included |
Further manufacturer information
Warranty: 1-year manufacturer's warranty on Elcometer 456 probes.
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register
