Product description
Chlorides deposited on a surface by contaminated abrasive during blasting can lead to premature failure of a coating.
Contamination can occur, especially if the abrasive is recycled several times. By using the Elcometer 134A Chloride Ion Test for abrasives in the field, contaminants can be accurately identified and costly surface related failures prevented.
Results are recorded in parts per million (ppm) so no complicated calculations are required. The Elcometer 134A test is designed to use a 1:1 ratio to allow easy conversion to µg/cm².
Cross-contamination from test to test is avoided by the single use of individual components. The components are pre-measured to ensure accurate results in parts per million. In addition, no temperature correction from 41°F to 176°F is required. Use this innovative product safely with any abrasive.
Standards
ISO 8502-5, SSPC Guide 15.Uses ASTM D4940 principles but provides the added value of chloride ion specific measurements.< /div>
- Product number: 1040091
- Manufacturer: Elcometer
- Weight: 0.344 kg
Technical details
| Technical Data – Elcometer 134A Chloride Ion Test Kit for Abrasives | |
| Part number | Description |
| E134----2 | Elcometer 134A Chloride Ion Test Kit for Abrasives |
| Measuring range | 1 - 60 µg/cm² (1 - 60 ppm) |
| Scale resolution | 1 µg/cm² (1 ppm) |
| Scan time | 1.5 minutes (approx.) |
| Tests per kit | 4 |
| Storage conditions | No more than 25 °C (77 °F) |
| Weight | 367 g (13 oz) |
| Dimensions | 185 x 125 x 110 mm (7 x 5 x 4.5 inches) |
| Packing list |
|
Further manufacturer information
Register
