WIWA PROFIT Airless Sprayers – Efficient Coating in Trade & Industry
The WIWA PROFIT series is among the most versatile 1K Airless spray units for professional coatings. Whether it's lacquers, primers, corrosion protection, or high-build materials – the PROFIT models are designed for reliability, constant flow rates, and easy maintenance.
In this practical guide, we show you which WIWA PROFIT model is suitable for which application, which basic settings have proven effective, and how to avoid typical errors.
Product Overview: WIWA PROFIT Models
| Model | Pressure Ratio | Max. Delivery Rate | Typical Applications |
|---|---|---|---|
| PROFIT 3022 | 22:1 | 3.0 l/min | Lacquers, primers, water-based media |
| PROFIT 3033 | 33:1 | 3.0 l/min | Thicker lacquers, corrosion protection, textured paints |
| PROFIT 4210 | 10:1 | 4.2 l/min | High material throughput, large-scale projects |
High surface output for efficient projects
Suitable for high-viscosity coating materials
Low maintenance & ideal for water-based media
With unknown materials, always start with lower pressure and increase gradually. This reduces overspray, protects seals, and ensures a more uniform spray pattern.
Recommended Basic Settings (Guide Values)
- Material pressure: approx. 120–180 bar (depending on viscosity)
- Air inlet pressure: max. 8 bar
- Nozzle size: 0.33 mm for standard lacquers
- Spray angle: 40°–65° depending on component geometry
Note: Values are guide values and material-dependent. Technical data according to WIWA PROFIT documentation.
Professional Workflow in 6 Steps
- Stir and filter the material
- Mount the appropriate nozzle
- Increase pressure slowly
- Check the spray pattern on a test surface
- Apply in even strokes with constant distance
- Flush thoroughly after finishing work
Typical Problems & Solutions
- Striping: Slightly increase pressure, check nozzle
- Spitting: Clean filter, vent the material
- Too much overspray: Reduce pressure, shorten spray distance
- Erratic operation: Stabilize air inlet pressure
Maintenance & Care
- Daily flushing after finishing work
- Clean filters regularly
- Visually inspect seals
- Check release agent level
- Inspect hoses for damage
FAQ about the WIWA PROFIT Series
Is the PROFIT series suitable for water-based lacquers?
Yes, thanks to the stainless steel material fluid section.
Airless or Air-Combi?
Airless for high layer thicknesses, Air-Combi for finer finishes.
What hose lengths are possible?
Standard up to 7.5 m, longer distances depending on material.
How high is the maintenance requirement?
Low – very durable with regular cleaning.
For trade or industry?
Both – depending on the model and equipment.
Conclusion:
The WIWA PROFIT series is a reliable solution for professional coatings where constant quality,
robust technology, and flexible application possibilities are required.
