Maintenance Guide
SATAjet 1000 B: Professional Cleaning & Troubleshooting
Learn the proper care of your SATAjet 1000 B! From correct cleaning and optimal storage to professional troubleshooting – this is how you keep your spray gun in top condition long-term.
Cleaning Checklist: What You Need to Know
✅ Proper Cleaning Agents
- Use neutral cleaning agents with pH value 6-8
- No aggressive cleaning media
- No acids, alkalis, bases, or paint removers
- Use only SATA-recommended washing machines
❌ What to Avoid
- Immersing in solvents or cleaning agents
- Cleaning in ultrasonic devices
- Using improper cleaning tools
- Halogenated hydrocarbons
Step-by-Step Cleaning Instructions
1. Immediate After-Cleaning
- Interrupt spray air immediately
- Empty flow cup [1-16]
- Flush paint channel with cleaning fluid
2. Thorough Cleaning
- Flush spray gun with thinner
- Clean air nozzle with brush or bristle brush
- Grease moving parts with gun grease
🔧 Pro Tip: Use SATA nozzle cleaning needles (# 62174 or # 9894) for contaminated drill holes. Even the slightest damage negatively affects the spray pattern!
Optimal Storage & Care
Storage Conditions
- Dry storage location
- Protected from dust and moisture
- Clean, well-ventilated environment
- Stable temperature conditions
Care Routine
- Clean after every use
- Flush thoroughly before material change
- Regular inspection for wear
- Grease moving parts
Common Malfunctions & Solutions
Malfunction: Unstable Spray Pattern (Fluttering/Sputtering)
Possible Causes:
- Paint nozzle not tightened
- Air distribution ring damaged
- Air nozzle loose
- Air circuit contaminated
- Nozzle set dirty/damaged
Solutions:
- Tighten paint nozzle with universal wrench
- Replace air distribution ring
- Hand-tighten air nozzle
- Clean air circuit
- Clean/replace nozzle set
Malfunction: Spray Pattern Too Small, Angled, or One-Sided
Possible Causes:
- Air nozzle bores covered with paint
- Paint nozzle dirty
- Paint needle damaged
- Air circuit clogged
Solutions:
- Clean air nozzle
- Clean paint nozzle
- Replace paint needle
- Flush air circuit
⚠️ Important Note: All troubleshooting should only be performed by trained professionals. If problems cannot be resolved, contact the SATA customer service department.
Cleaning Agents & Tools
pH Value 6-8
Neutral cleaning agents
SATA Nozzle Cleaning Needles
# 62174 / # 9894
Gun Grease
For moving parts
Brush/Bristle Brush
For air nozzle cleaning
Prohibited: Acids, alkalis, bases, paint removers, aggressive cleaning media, ultrasonic devices, immersion in solvents
Start Professional Maintenance
With proper care, your SATAjet 1000 B remains powerful in the long term
Conclusion
Proper care of your SATAjet 1000 B is the key to consistently optimal results. With neutral cleaning agents, correct storage, and professional troubleshooting, you not only extend the lifespan of your spray gun but also ensure consistently high quality with every application. Invest in proper maintenance – your SATAjet 1000 B will thank you.
