SAFETY neo Lab Coat (NORTHSHIELD): Fit, Standards & Hood – How to Use Correctly in Practice
When every fiber, every electrostatic charge, and every small leak counts in the painting zone, you need work and painting apparel designed specifically for this environment: dissipative, comfortable, robustly constructed – and quick to put on and take off in daily use.
Product Overview: Variants, Use & Benefits
The SAFETY neo coat is work and painting apparel featuring a concealed zipper (incl. Velcro), 1 chest pocket, 2 front pockets, lint-free microfiber cuffs, and a Velcro closure at the collar. It is delivered without a hood – a matching attachable hood is optionally available.
| Variant | Available Sizes | Standard Length (Guideline) | Color | Highlights |
|---|---|---|---|---|
| SAFETY neo Coat | S, M, L, XL, 2XL, 3XL | approx. 105 cm | Dark Grey/Light Grey (others optional) | Dissipative (carbon), antistatic, flame retardant, silicone-free, washable & iron-safe, Teflon finish, BOUND SEAM stitches |
| Option: Attachable Hood | KAP-1 (S/M), KAP-2 (L/XL/2XL), KAP-3 (3XL …) | – | – | Fast attachment via press-stud strip at the collar; perfect hold through snap system |
Recommended "Basic Settings" (Guidelines)
The following points are not machine parameters, but proven guidelines for fit, tightness, and function – derived from equipment and system logic (collar/Velcro, cuffs, hood).
- Collar: Close high and apply Velcro neatly (for a stable fit at the neck).
- Cuffs: Let microfiber cuffs lie flat (lint-free, comfortable).
- Front: Fully close the concealed zipper and press Velcro points clearly and fully.
- Length/Fit: Standard length of approx. 105 cm as a guide; ultimately, freedom of movement during reaching and overhead work counts.
- Hood (optional): Select the matching hood item number according to the coat size (KAP-1/KAP-2/KAP-3).
Pro Workflow: 6 Steps to the Perfect Coat Setup
- Clarify Environment: Do you work in sensitive areas (dust/fiber requirements, electrostatic dissipation)? Then dissipative, lint-free fabric is a central requirement.
- Check Body Measurements: Use the size chart (height, chest/waist measurements, sleeve length) as a guide to narrow down the size.
- Select Size: Choose the size that maintains freedom of movement without sleeves/neck standing "open."
- Hood Yes/No: If a hood is needed: select the correct KAP variant based on size and attach to the collar via press studs.
- Test Fit: Close the concealed zipper, press Velcro surfaces firmly, lift arms/reach – nothing should tension or gap.
- Establish Care Routine: Washable and iron-safe – plan fixed change intervals so the surface stays clean and the Teflon finish provides its benefits in daily use.
Size Chart (Guidelines from Technical Table)
The following values help with pre-selection. In practice: if you are between two sizes, freedom of movement at the shoulder/arm is usually the deciding factor.
| Size | Clothing Size (Guideline) | Body Height (cm) | Chest Circumference (cm) | Waist Circumference (cm) | Sleeve Length (cm) |
|---|---|---|---|---|---|
| S | 42/44 | 165–168 | 84–88 | 74–78 | 57–58 |
| M | 46/48 | 171–174 | 92–96 | 82–86 | 59–60 |
| L | 50/52 | 177–180 | 100–104 | 90–94 | 61–62 |
| XL | 54/56 | 182–184 | 108–112 | 98–104 | 63–64 |
| 2XL | 58/60 |
Personal advicePlease feel free to contact us by phone or email and we will advise you quickly, competently and without obligation. +49 7546 3520019 Mon-Fri, 9:00 a.m. - 4:00 p.m |
