Practical Guide
NORTHSHIELD Overall „COOLY ocean“: Practical Guide for Painters & Coaters
Antistatic according to EN 1149-1, lint-free, with multi-functional collar (rollable hood / stand-up collar) – and with a clear sizing guide plus workflow for everyday life in the paint booth & workshop.
Introduction: How "COOLY ocean" Helps You Every Day
In painting environments, three things matter: a clean surface, controlled statics, and wearing comfort over hours.
The NORTHSHIELD "COOLY ocean" overall addresses exactly these needs: lint-free polyester filament fabric with integrated carbon yarn to dissipate electrostatic charge, CE compliance and EN 1149-1, plus practical details like a 2-way front zip, microfiber cuffs, Velcro leg closures, and back ventilation.
Product Image (COOLY ocean)
Product Overview: Variants, Uses, Advantages
| Area | What You Get | Practical Benefit |
|---|---|---|
| Material & Statics | Lint-free polyester filaments with carbon content (approx. 2%) / carbon yarn; permanently dissipative; antistatic; silicone-free; washable & iron-resistant | Less dust/fiber entry, more controlled electrostatic effects – important for sensitive surfaces |
| Standards | EN 1149-1, CE compliant | Better classification for ESD/static requirements in the work environment |
| Design & Comfort | Two-tone Navy/White; back ventilation & mesh vents under the armpits; elastic waistband | More comfortable during long shifts, less heat build-up |
| Details | 2-way front zip, multifunctional collar (rollable hood / stand-up collar), microfiber cuffs, Velcro leg closures, chest/slit/back pocket, 2 knee pad pockets | Faster on/off, clean closures, knee-friendly work, tools always at hand |
| Sizes | S to 4XL | Fit quickly selectable – important for freedom of movement & tight cuffs |
KPI
EN 1149-1 & CE
Antistatic properties are clearly classified – ideal for minimizing statics in the process.
KPI
Multifunctional Collar
Rollable hood or stand-up collar – flexible depending on the work step & temperature.
KPI
Sizing Help with Measurements
S–4XL including body height/circumferences – reduces returns and ensures a clean fit.
Practical Tip: Use the stand-up collar for quick tasks/short jobs (more air), and only unroll the hood when overspray, sanding dust, or drafts become relevant. This keeps it more comfortable without sacrificing protection.
Size Chart (Measurements) – Quick Selection without Guesswork
Note: Measurements are product guidelines for orientation (e.g., body height/circumference). For an optimal fit, if in doubt between two sizes, choose the larger one if you are wearing thicker clothing underneath.
| Size | Clothing Size | Body Height (cm) | Chest Circumference (cm) | Waist Circumference (cm) |
|---|---|---|---|---|
| S | 42/44 | 165–168 | 84–88 | 74–78 |
| M | 46/48 | 171–174 | 92–96 | 82–86 |
| L | 50/52 | 177–180 | 100–104 | 90–94 |
| XL | 54/56 | 182–184 | 108–112 | 98–104 |
| 2XL | 58/60 | 186–188 | 116–120 | 110–116 |
| 3XL | 62/64 | 190–192 | 124–128 | 122–126 |
| 4XL | 66/68 | 194–196 | 130–132 | 128–130 |
Remember: A good fit means: cuffs close cleanly without cutting in – and you can squat without tension on the zipper/crotch.
Recommended „Base Settings“ (Guidelines)
For protective clothing, „base settings“ are primarily fit, closure points, and manner of wearing.
These points are intentionally formulated as guidelines because usage (paint, temperature, shift duration) varies greatly depending on the operation.
- Select Collar Mode: Stand-up collar for more air; hood (rollable) for overspray/dust or when working overhead.
- Sleeve Closure: Apply microfiber cuffs smoothly (no folds) – this minimizes the risk of particles „pumping through“.
- Leg Closure: Adjust Velcro so it fits tightly against the shoe/overshoe without blocking movement.
- Layers Underneath: For long shifts, a breathable base layer is preferred; for cold weather, a thin middle layer – so the back ventilation can do its job.
- Pockets & Knee Pad Pockets: Pack tools so that nothing „rubs“ or puts point pressure on the fabric (especially in the knee area).
Pro-Workflow (5–7 Steps) – How to Use the COOLY ocean Properly
- Check Size: Match body height + chest/waist against the table (go larger for thicker undergarments).
- Pre-Check: Zipper, Velcro, seams, cuffs – is everything moving smoothly and undamaged?
- Set Collar: Leave hood rolled up and only unroll as needed (flexibility is a core feature).
- Putting it on „Bottom to Top“: Legs → Waist → Arms → Collar/Hood; then set the Velcro leg closures.
- Start Work: Use pockets intentionally (chest/side pockets) – let nothing dangle loosely that could catch on edges.
- Taking it off without Contamination: Open zipper, roll overall outwards, release cuffs last – this keeps the inside clean.
- Aftercare: Wash according to usage (washable/iron-resistant) and store in a dry, low-dust place.
Troubleshooting: 4 Typical Problems & Quick Measures
1) Overall „Pulls“ or Restricts Movement
- Check size against body height/circumference; if borderline, go one size up.
- Velcro leg closures not too tight – only pull final after a few movements.
2) Heat Build-up in Long Shifts
- Use stand-up collar mode (hood rolled up) if the job allows.
- Choose breathable base layers under the overall; schedule breaks for „airing out“.
3) Velcro/Zip Feels „Snagged“
- Briefly check before use if Velcro surfaces are free of lint/particles.
- Align the 2-way zip straight, do not close under tension (otherwise it tilts faster).
4) Cuffs Do Not Sit Properly
- Pull microfiber cuffs smooth (no folds), then place glove over them.
- With a lot of movement: „Reset“ once after 10–15 minutes (a quick check saves trouble).
Maintenance & Care (5 Points)
- Air out after use and store dry (low dust, not crumpled up).
- Regularly clear Velcro surfaces of particles so they close reliably.
- Check zipper: does it run smoothly over the entire length (2-way zip)?
- Utilize washability/iron-resistance: only wash when necessary – and let the overall dry completely before next use.
- If there is visible damage (seam, cuff, zip), do not try to „save“ the overall, but replace it – the protective effect relies on intact closures.
FAQ (Practical)
Is the COOLY ocean antistatic?
Yes, the overall is designed for antistatic properties and classified according to EN 1149-1 (CE compliant).
What is the advantage of the multifunctional collar?
You can switch between hood (rollable) and stand-up collar – depending on whether you need more ventilation or more coverage.
What sizes are available?
The COOLY ocean is available from S to 4XL on beschicht.com. You can find suitable guide measurements in the table.
Can I work kneeling in the overall?
Yes – the overall has knee pad pockets, which provides noticeable relief during assembly/preparation work.
Is the overall washable?
According to manufacturer specifications, the fabric is washable and iron-resistant – ideal if you want to recondition it regularly at defined intervals.
Conclusion
The NORTHSHIELD „COOLY ocean“ overall is a strong choice if you are looking for a lint-free, antistatic, and comfortable overall with practical details in painting and industrial environments – including a flexible collar solution and a clear size chart. If you set the fit + closures properly, the overall will quickly become your „standard go-to“ in everyday life.
Product data is based on manufacturer specifications and technical details on the product page. Values/fit are guidelines and may vary depending on the manner of wearing/undergarments.
