Practice Guide
Mirka Safety Gloves Cut-D – Maximum Safety for Precise Work
The Mirka Safety Gloves Cut-D combine high-level cut resistance according to EN 388 with excellent dexterity and long-lasting comfort. Designed for assembly, construction, transport, and industry – anywhere safety meets precision.
Product Overview & Variants
| Size | Product Code | EAN (12 Pack) |
|---|---|---|
| 7 (S) | 9190250007 | 6416868960624 |
| 8 (M) | 9190250008 | 6416868960631 |
| 9 (L) | 9190250009 | 6416868960648 |
| 10 (XL) | 9190250010 | 6416868960655 |
| 11 (2XL) | 9190250011 | 6416868960662 |
Cut Protection D (EN 388)
Outstanding resistance to sharp edges and metal parts.
Comfort & Grip
HPPE + steel fiber with PU coating for firm, slip-resistant grip.
Certified to EN ISO 21420
Complies with EU PPE Category II for mechanical risks.
Tip: Always choose the correct size – gloves that are too tight reduce dexterity, while oversized ones lower protection.
Recommended Settings (Guideline Values)
- Standard: EN 388:2016 +A1:2018 – tested for abrasion, cut, tear, and puncture resistance
- Abrasion Class 4 (max 4) • Cut Class 5 (max 5) • Tear Class 4 (max 4) • Puncture Class 4 (max 4) • TDM = D (max F)
- Material: HPPE + steel fiber, PU-coated palm
- Use areas: assembly, construction, transport, manufacturing, fine mechanics
- Care: rinse with cold water or wipe with a damp cloth, air dry at room temperature
Professional Workflow for Optimal Protection
- Select the correct size (S–2XL according to EN ISO 21420).
- Inspect before every use – replace gloves with any visible damage.
- Grip gloves by the cuff, straighten fingers, and put them on evenly.
- Use only within the specified temperature and chemical range.
- Clean after work and dry in a well-ventilated area.
- Do not reuse damaged or contaminated gloves.
Troubleshooting in Daily Use
1. Gloves slipping: Size too large – use a smaller model.
2. Reduced grip feel: PU coating dirty – clean with damp cloth and dry.
3. Skin irritation: Sensitive skin – use cotton under-gloves or switch models.
4. Gloves tear early: Used outside specification (e.g., heavy pressure on sharp edges); check application area.
2. Reduced grip feel: PU coating dirty – clean with damp cloth and dry.
3. Skin irritation: Sensitive skin – use cotton under-gloves or switch models.
4. Gloves tear early: Used outside specification (e.g., heavy pressure on sharp edges); check application area.
Maintenance & Care
- Inspect before every use for signs of damage
- Clean only with cold water or a damp cloth
- Do not machine dry or chemically clean
- Store away from UV light and heat sources
- Replace if protection level is uncertain
FAQ – Frequently Asked Questions
- How long do the Cut-D gloves last? Lifetime depends on use and care; inspect regularly and replace when worn.
- Are the gloves washable? Yes, rinse with cold water or wipe clean; do not machine wash.
- Which standard applies to cut protection? EN 388:2016 +A1:2018 – mechanical risk protection.
- Can they be used near moving machines? Only if there is no risk of entanglement.
- What are they made of? HPPE and steel fiber with PU-coated palm for enhanced grip.
Conclusion
The Mirka Safety Gloves Cut-D are the perfect choice for professionals requiring high-level cut protection without sacrificing dexterity. Whether in workshops or industrial assembly, they ensure safety, comfort, and control throughout your workday.
