Mirka Dust Extractor 1025 L: The Professional Vacuum for Industry and Crafts
The Mirka Dust Extractor 1025 L is more than just a vacuum - it's your reliable partner for clean workplaces and healthy breathing air. In this practical guide, you'll learn how to get the maximum performance from your Mirka vacuum.
Product Overview: Technical Data Comparison
| Specification | EU Version | International |
|---|---|---|
| Power | 1000 W | 1000 W |
| Max. Suction Power | 21.0 kPa | 21.0 kPa |
| Airflow | 216 m³/h | 216 m³/h |
| Container Volume | 25 Liters | 25 Liters |
| Dust Class | L | L |
* Technical data may vary slightly depending on model variant
💪 Strong Suction Power
21 kPa suction power for efficient removal of dust and liquids
🔇 Low Noise Level
Only 72 dB(A) for comfortable work without hearing protection
🛡️ Robust Construction
IP24 protection class against dust and splashing water
💡 Pro Tip: Filter Cleaning
When suction power decreases: Turn on device, cover nozzle with palm, and press cleaning button 3 times for 2 seconds each. The airflow removes dust from the filter vanes.
Ready for Perfect Cleanliness?
The Mirka Dust Extractor 1025 L offers professional performance for demanding applications
Discover Mirka Vacuum NowRecommended Settings and Applications
Applications: The Mirka 1025 L is ideal for dry, non-combustible dust and liquids with OEL values > 1 mg/m³. Perfect for factories, construction sites, and workshops.
Dust Class L: Suitable for dusts with occupational exposure limits above 1 mg/m³. Maximum filter permeability is 1%.
Tool Connection: The integrated connection allows direct operation of power tools with up to 2600 W (EU version).
Professional Workflow in 6 Steps
- Check power supply (220-240 VAC, 50-60 Hz)
- Verify proper seating of filter bag and filter element
- For liquid collection: Remove filter bag
- Connect power tool to device connection if needed
- Turn on vacuum (Position I or AUTO)
- After use: Clean filter and empty container
Common Problems and Solutions
Decreasing Suction Power
- Perform filter cleaning
- Change filter bag (Art. 8999000211)
- Check filter element (Art. 8999600411)
Device Won't Turn On
- Check power supply
- Check fuse (16A EU, 10A International)
- Inspect power cord for damage
Liquid Leaking
- Clean and check float switch
- Turn off immediately if foaming occurs
- Empty and dry container
Increased Noise Level
- Check openings for blockages
- Inspect filter for damage
- Check bearings and moving parts
Maintenance Schedule for Maximum Lifespan
- Daily: Check power cord for damage, empty container
- Weekly: Clean filter, wipe housing
- Monthly: Change filter bag, check seals
- Annually: Dust test by authorized service center
- As needed: Use only original Mirka spare parts
Frequently Asked Questions (FAQ)
Can the Mirka 1025 L also collect liquids?
Yes, but the filter bag must be removed first. The float switch automatically stops at maximum level.
Which dusts is dust class L suitable for?
Dust class L is suitable for dry, non-combustible dusts with OEL values > 1 mg/m³. Not suitable for combustible or explosive dusts.
How often should the filter be changed?
The filter bag should be changed monthly, the filter element depending on usage. Change if suction power decreases despite cleaning.
Can I use the vacuum outdoors?
Outdoor use should be kept to a minimum. IP24 provides protection against splashing water, but not for continuous rain.
What to do with defective power cord?
Defective power cords must be replaced by authorized Mirka service personnel. Do not repair yourself!
Conclusion
The Mirka Dust Extractor 1025 L is a reliable industrial vacuum that impresses with its strong suction power, versatile applications, and robust construction. With regular maintenance and proper handling, it provides years of reliable performance for professional users.
