Finixa POL 50 Pneumatic Polishing Machine: Compact Guide for Precise Paint Finishing
The Finixa POL 50 is a lightweight, pneumatic rotary polisher designed for controlled polishing work on details, edges, and small to medium-sized surfaces. In this guide, you will learn when to use the machine, which settings serve as benchmarks, and how to avoid typical polishing errors.
Product Overview: What is the Finixa POL 50 suitable for?
The POL 50 is pneumatically operated, rotary-driven, and offers an adjustable speed of 1,200 to 2,400 RPM. This makes it particularly interesting for paint shops, smart-repair, spot-repair, and finishing work where control is more important than maximum surface coverage.
| Feature | Practical Benefit |
|---|---|
| Speed Range 1,200–2,400 RPM | Finely adjustable for low to medium speeds |
| Operating Pressure 6.2 bar / 90 PSI | Reference value for stable performance in the compressed air network |
| Air Consumption 170 L/min | Check compressor capacity before use |
| Weight 0.7 kg | Easy handling for detail and edge zone work |
| M14 Thread, Backing Pad not included | Setup can be chosen to match the polishing pad |
View Finixa POL 50 directly at Beschicht.com
Ideal for workshops, paint finishing, spot-repair, and controlled polishing work with compressed air.
Go to ProductRecommended Basic Settings as Guidelines
The following values are practice-oriented guidelines. Paint condition, polish, pad, ambient temperature, and user pressure can significantly influence the result.
| Application | Speed | Note |
|---|---|---|
| Fine Finish | approx. 1,200–1,600 RPM | Low pressure, clean pad, short inspection passes |
| Spot-Repair | approx. 1,600–2,000 RPM | Keep area small and check temperature |
| Heavier Correction | up to approx. 2,400 RPM | Only with appropriate pad and controlled pressure |
Professional Workflow in 6 Steps
- Clean, degrease, and visually inspect the work surface.
- Choose the appropriate polishing pad and polish for the paint condition.
- Center the backing pad and pad cleanly; do not use damaged accessories.
- Stabilize compressed air supply to approx. 6.2 bar and consider air consumption.
- Start at low speed, spread the polish, and work in short paths.
- Check result with a clean microfiber cloth and fine polish if necessary.
Troubleshooting: Common Problems
1. Holograms or Haze
Reduce speed, choose a finer pad, and polish out polish residues thoroughly.
2. Excessive Heat Input
Decrease operating pressure, work in smaller sections, and keep the machine constantly in motion.
3. Uneven Running or Vibration
Center the pad, check the backing pad, and replace damaged pads immediately.
4. Performance Drops
Check compressed air line, coupling, and compressor performance; air consumption is 170 L/min.
Maintenance and Care
- Wipe the machine dry and clean after work.
- Regularly check pad and backing pad for wear.
- Keep compressed air connection clean and use appropriate couplings.
- Do not use damaged polishing pads or unsuitable backing pads.
- Stop operation in case of unusual noises, significant loss of performance, or vibrations.
FAQ for the Finixa POL 50
Is the POL 50 suitable for large surfaces?
It can be used on larger areas, but it is particularly strong for detail surfaces, spot-repair, and controlled finishing work.
Is a backing pad included?
No, according to the product specifications, the backing pad is not included. This allows the setup to be chosen to fit the application.
What air pressure is required?
The product specifications list an operating pressure of 6.2 bar or 90 PSI.
What speed is recommended?
The adjustable range is 1,200 to 2,400 RPM. For finishing work, a cautious start in the lower range is recommended.
What should I look out for while polishing?
Work with a clean pad, controlled pressure, and in short sections. For sensitive paints, regularly check the temperature and results.
Conclusion
The Finixa POL 50 is a compact pneumatic polishing machine for users who want to work precisely, controlled, and flexibly during paint finishing. With adjustable speed, low weight, and appropriate accessories, it is particularly suitable for spot-repair, detail areas, and professional finishing work in the paint shop.
