Finixa PLI 60 Gun for Metal Adhesive
To cleanly process 220ml 2:1 cartridges in everyday bodywork or repair tasks, you need one thing above all: a suitable, precise, and robust mixing gun. This is exactly where the Finixa PLI 60 comes in. It is designed for double 220ml cartridges in a 2:1 ratio and supports uniform material discharge for metal bonding.
This article shows you what matters in practice regarding preparation, dosing, workflow, error prevention, and maintenance.
Product Overview
| Feature | Details |
|---|---|
| Product | Finixa PLI 60 |
| Product Type | Manual Mixing Gun / Bi-Mixer |
| Compatibility | For double 220ml cartridges in 2:1 mixing ratio |
| Area of Use | Metal bonding, structural repair, and joining processes |
| Compatible System | Suitable for Finixa 220ml 2:1 cartridges such as the PLI-50 system |
| Packaging Unit | 1 piece per outer carton |
Recommended Settings and Guidelines
For the PLI 60 itself, no separate setting values such as pressure, torque, or temperature windows are specified in the product description. The primary reliable information is its compatibility with 220ml 2:1 cartridges. Guidelines for the actual bonding process can only be derived from the compatible adhesive system and should therefore always be understood as system guidelines.
| Parameter | Guideline | Note |
|---|---|---|
| Cartridge Type | 220 ml, 2:1 | Directly derived from the product description |
| Open time (PLI-50 system) | approx. 60 min at 23 °C | Adhesive value, not gun value |
| Handling time (PLI-50 system) | approx. 4 hrs at 23 °C | Coordinate component fixation and process planning accordingly |
| Full cure (PLI-50 system) | approx. 24 hrs at 23 °C | Temperature dependent; treat as a guideline |
Professional Workflow in 6 Steps
Prepare and clean joining surfaces according to manufacturer specifications and plan the workflow in advance. Especially in structural bonding, clean preparation determines adhesion, gap filling, and process reliability.
Insert the matching 220ml 2:1 double cartridge into the PLI 60 and ensure that the piston guide and cartridge seat are aligned cleanly and without tension.
Press out a small amount of material before starting the actual mixing and application process. This ensures that both components begin to flow evenly.
Discharge using uniform lever pressure to keep the bead pattern, material volume, and application reliability constant. For long adhesive seams, a calm, reproducible working rhythm is beneficial.
Join and position the components within the system-dependent open time. For compatible 2K epoxy systems like PLI 50, a cleanly planned sequence is particularly important.
Do not let the system sit unnecessarily with material beginning to set. Immediate post-processing prevents encrustation, reduces peak force for the next use, and increases tool life.
Troubleshooting in Practice
- Check cartridge for correct seating and free piston movement.
- Avoid long work interruptions so material doesn't set in the mixing area.
- If there is resistance, do not use force; check the system and restart if necessary.
- Always consistently discard the initial material.
- Only use cartridge systems that truly match the gun's 2:1 geometry.
- Do not interrupt application for long periods mid-process.
- Observe system viscosity and temperature.
- Do not tilt the tool and ensure the cartridge is inserted tension-free.
- If material is already setting, abort the step and start over cleanly.
- Perform discharge with constant lever pressure.
- Run a test seam before starting series application.
- Check component preparation and process time window.
Maintenance: 5 Points for Long Life
- Depressurize gun after every use and do not leave under unnecessary residual pressure.
- Keep the cartridge holder and contact surfaces clean.
- Remove dried material residue early before it strains the mechanics.
- Store tool in a dry and protected location.
- Only use with matching 220ml 2:1 systems to avoid improper loading.
FAQ
For double 220ml cartridges with a mixing ratio of 2:1.
It is a manual mixing gun for controlled discharge in everyday workshop use.
Yes, provided the cartridge system matches the PLI 60 in geometry and mixing ratio. However, the respective adhesive data sheet is always authoritative for the actual approval of the bonding process.
Because it keeps the material volume and bead pattern more constant. This improves reproducibility during joining and repair work.
It determines how much time remains between application and joining. Especially with 2K epoxy systems, the entire process should be prepared before application.
Conclusion
The Finixa PLI 60 is the right choice when 220ml 2:1 cartridges for metal bonding need to be processed in a controlled, clean, and practical manner. Its strength lies not in complicated technology, but in suitable system compatibility and reproducible handling. Those who align the cartridge, process window, and component preparation cleanly will create a significantly more stable and efficient bonding application.
Get your 220ml 2:1 Cartridge Gun Now
Go directly to the product and order the Finixa PLI 60 for your metal bonding process online.
To the Finixa PLI 60 in the Shop