Finixa EQU 64 Gantry Painting Stand: efficient painting, rotating, and positioning
The Finixa EQU 64 is a mobile gantry painting stand for doors, fenders, spoilers, and other add-on parts. The rotating central axis can be locked at various angles via a foot pedal – ideal for positioning workpieces stably, ergonomically, and accessibly during painting.
Finixa EQU 64 – mobile gantry painting stand for professional painting work
Why a gantry painting stand helps in the paint booth
Anyone wanting to paint doors or larger add-on parts cleanly needs three things above all: a stable mount, quick access to all sides, and secure positioning during the spraying process. This is exactly where the EQU 64 shows its strengths.
Due to its mobile design, the stand can be used flexibly in the workshop or paint booth. The central axis is rotatable and can be fixed in several angles via a foot pedal. This keeps the component in a controlled position, while both hands remain free for the spray gun, inspection, and rework.
Product Overview – Finixa EQU 64
| Feature | Specification | Practical Benefit |
|---|---|---|
| Product | Finixa EQU 64 | Gantry painting stand for workshop and paint booth |
| Design | Mobile stand with rotating central axis | Components can be aligned ergonomically |
| Locking | Foot pedal, various angles | Quick fixing without changing grip |
| Scope of Delivery | Axle extensions, 4 vertical supports with hooks, 2 supports with holes | Flexible mount for doors and add-on parts |
| Max. Load Capacity | 50 kg | Suitable for many typical bodywork add-on parts |
| Weight | 26 kg | Stable base while still being mobile |
| Packaging Dimensions | 149 × 23 × 16 cm | Plannable for storage, shipping, and goods receipt |
Data according to manufacturer/product page; treat load capacity and dimensions as reference values for product selection.
Always check the balance of the mounted component before painting. The workpiece should sit securely without tipping or oscillating when rotated. Only then lock the desired working position using the foot pedal.
Finixa EQU 64 directly at Beschicht.com
For professional painting work on doors, fenders, and add-on parts – view product now.
Buy Finixa EQU 64 →Recommended Basic Settings in Use
These values are practical reference points and must be adjusted depending on the component, weight, shape, and workshop environment.
| Parameter | Reference Value | Note |
|---|---|---|
| Component Weight | Up to max. 50 kg | Do not exceed maximum specification |
| Working Angle | Lock according to spray direction | Use foot pedal to keep position stable |
| Component Mount | Select hook or hole supports accordingly | Place contact points outside visible paint surfaces if possible |
| Double Door Mount | With axle extensions | Distribute load evenly and test beforehand |
| Floor Space | Level, clean, free-moving | Check rollers and range of movement before starting painting |
Professional Workflow: 6 steps to a clean painting result
Position the EQU 64 on a level, clean surface. Especially in the booth, there should be sufficient freedom of movement around the stand for the painter, hose, and air supply.
Depending on the component, use the vertical supports with hooks or the supports with holes. The goal is a secure fixation with as little contact as possible to the later visible paint surface.
Carefully hang or fasten the component. Check before painting whether the workpiece is sitting stably and the maximum load capacity of 50 kg is not exceeded.
Align the rotating central axis so that edges, folds, and outer surfaces are easily accessible. Then lock the position via the foot pedal.
First, coat hard-to-reach areas, folds, and edges, then the visible main surfaces. This reduces rework and avoids dry transitions.
Lock the component in a stable drying position. Only move it when the process, flash-off time, and material specifications allow it.
Troubleshooting – 4 typical problems
- Check weight and center of gravity.
- Redistribute mounting points.
- Perform a short rotation and locking test before painting.
- Set hooks or hole supports so that visible surfaces remain free.
- If possible, mount at assembly points, inner edges, or areas that will be covered later.
- Check component position before final cleaning.
- Check floor area for dirt, adhesive tape residue, or overspray.
- Clean rollers and range of movement before use.
- Route hoses so they do not get caught on rollers or the component.
- Adjust component angle so that edges are more accessible.
- Coat edges first, then paint main surfaces.
- Use intermediate positions instead of spraying from an unfavorable angle.
Maintenance – 5 points for long service life
- Clean after each use: Remove overspray, dust, and material residue from supports, axle, and rollers.
- Check locking mechanism: Regularly check the foot pedal and locking function for secure operation.
- Check supports: Check hooks, hole supports, and mounts for deformation or damage.
- Keep rollers free: Keep the roller area clean so the stand can be moved in a controlled manner in the booth.
- Respect load capacity: Do not mount components that exceed the specified maximum load capacity.
FAQ – Frequently Asked Questions about the Finixa EQU 64
Which components is the EQU 64 suitable for? ＋
The stand is primarily intended for doors and add-on parts such as fenders, spoilers, or similar parts that need to be securely mounted and rotated or positioned during painting.
Can I mount two doors at the same time? ＋
Yes, according to product information, axle extensions are included with which two doors can be mounted side-by-side. Important is an even load distribution and compliance with the maximum load capacity.
How is the working angle fixed? ＋
The rotating central axis can be locked at various angles via a foot pedal. This allows the component to be positioned faster and more ergonomically during painting.
What is important during the first use? ＋
Before the first painting process, all supports should be mounted, the locking mechanism tested, and a trial run performed with the respective component. This way, you avoid unstable positions during the spraying process.
Why is a rotating painting stand more efficient than a simple trestle? ＋
A rotating stand reduces changing grip, setting down, and repositioning. Especially with doors and complex add-on parts, edges, inner areas, and outer surfaces can be reached in a more controlled manner.
Conclusion
The Finixa EQU 64 is a practical solution for painting shops that want to process doors and add-on parts securely, flexibly, and ergonomically. The combination of mobile design, rotating central axis, foot pedal locking, and 50 kg load capacity makes it a strong helper for efficient painting processes – especially where clean edges, stable component positions, and a fast workflow count.
View Finixa EQU 64 now
Mobile gantry painting stand for professional workshop and painting work.
To the product →