Finixa CPP 17 Spray Booth Protection: Peelable Protection for Paint Booths
If you want to reliably protect spray booth walls from overspray, you need a coating that can be applied cleanly, overworked multiple times, and removed later. Finixa CPP 17 is a white, water-based, and peelable spray booth protector for indoor areas such as walls, lighting, and booth surfaces.
What is Finixa CPP 17?
CPP 17 is a white protective coating for spray booth walls. It is used against overspray, can be processed with a spray gun, pressure tank, or paint roller, and is later removed by peeling. Particularly practical: after it becomes dirty, another layer can be applied, so that multiple layers can be peeled off together later.
| Feature | Practical Benefit |
|---|---|
| Water-based, white, peelable | Protects booth surfaces visibly and can be removed later |
| Indoor application: Walls and lighting | Suitable for typical surfaces in paint booths |
| VOC content: 0% according to safety data sheet | Interesting for businesses that prefer low-emission booth maintenance |
| Non-sticky | Helps keep the booth clean and usable in a controlled manner |
Recommended Basic Settings
The following values are guidelines from product specifications. Depending on booth temperature, air flow, substrate, and application device, adjustments may be useful.
| Method | Guideline |
|---|---|
| Spray Gun | 2.5 mm nozzle, 2.0–2.5 bar |
| Pressure Tank | 2.0–2.5 mm nozzle, 2.0–2.5 bar |
| Number of layers | 2–3 starting layers, up to a maximum of 15 layers |
| Wet film thickness | approx. 100 µm |
| Drying | 15 min. at 60 °C or up to approx. 180 min. depending on conditions |
Professional Workflow in 6 Steps
- Prepare surface: Keep booth walls clean, dry, and free of loose dirt.
- Stir product: Mix CPP 17 thoroughly so the white coating is processed evenly.
- Select application device: Use spray gun, pressure tank, or paint roller depending on the surface.
- Apply 2–3 layers: Work evenly and avoid runs.
- Allow to dry: Allow sufficient drying time before next use.
- Maintain and renew: Apply another layer when dirty; peel off the accumulated layers later.
Troubleshooting
| Problem | Actions |
|---|---|
| Coating is difficult to peel off | Check layer build-up; apply an additional layer if dirty; do not apply too thinly. |
| Uneven surface | Stir product better, check spray pressure, maintain even strokes. |
| Drying takes too long | Check air flow and temperature; do not apply too wet; use guidelines as a reference. |
| Material residue on tools | Clean spray gun, pressure tank, or roller with water immediately after use. |
Safe Handling and Storage
- Keep containers tightly closed when not in use.
- Store in a well-ventilated area and protect from frost.
- Maintain storage temperature below 25 °C.
- Keep away from open flames, heat sources, and ignition sources.
- Do not eat, drink, or smoke during use.
Maintenance of the Coated Booth
- Regularly check the level of contamination.
- Apply a new layer in time when overspray builds up.
- Observe the maximum number of layers.
- Dispose of peeled-off coating according to local regulations.
- Do not discharge product residues into the sewage system.
Order Finixa CPP 17 directly at Beschicht.com
Ideal for paint shops that want to protect spray booth walls cleanly and reduce cleaning efforts.
To ProductFAQ
What is Finixa CPP 17 used for?
For the peelable protection of spray booth walls and interior surfaces against overspray.
How is CPP 17 applied?
With a spray gun, pressure tank, or paint roller. For spray application, 2.0–2.5 bar is the guideline.
How many layers are recommended?
2–3 layers are recommended as a start. Up to 15 layers are possible in total.
How is the coating removed?
The dried protective layer is peeled off. Sufficient layer build-up makes removal easier.
How do I store CPP 17 correctly?
Store tightly closed, dry, dark, well-ventilated, frost-free, and below 25 °C.
Conclusion
Finixa CPP 17 is a practical solution for paint shops that want to protect spray booth surfaces from overspray and simplify later cleaning. The combination of water-based formulation, white visual control, multi-layer application, and peelable removal makes the product particularly interesting for regularly used spray booths.
