Colad Workshop Stool 1230528: Ergonomic workshop stool for clean, efficient work
Anyone who regularly works on low-lying components or at difficult angles in the workshop knows: a stable and ergonomic sitting position saves time, relieves the body, and improves control during detailed work steps. The Colad Workshop Stool 1230528 combines a large seat area, infinitely adjustable working height, robust casters, and a magnetic tool tray directly under the seat for exactly this purpose.
.jpeg?ts=1775683450)
Product Overview: Variants, Applications, Advantages
| Category | Details |
|---|---|
| Product | Colad Workshop Stool, Art. No. 1230528 |
| Design | Workshop stool with large, rounded seat, caster base, and magnetic tray |
| Height Adjustment | Gas spring system, working height approx. 46.5 to 57.5 cm (reference value) |
| Application | Particularly suitable for working at difficult angles and precise tasks in the lower work area |
| Mobility | Five large, stable casters; can also be used on floor gratings according to the manufacturer |
| Cover | Vinyl surface, resistant to oil, grease, and dirt |
| Additional Benefit | Large magnetic tool tray for small parts and frequently used tools |
| Delivery Status | Delivered disassembled, assembly instructions included |
Recommended Basic Settings for Daily Workshop Life
The following values are derived as guidelines from available product data. They help to quickly adjust the stool effectively to the respective workplace:
- Low working height: approx. 46.5 cm for tasks on lower body sections or for work requiring close visual guidance.
- Medium working height: roughly in the middle of the adjustment range when frequently switching between reaching, turning, and short distances.
- High working height: up to approx. 57.5 cm if you prefer to work more upright and frequently move between several points.
- Tool tray: only carry the small parts and hand tools you actually need to keep the tray organized.
- Rolling area: create enough clear space on the floor so the five casters can fully demonstrate their stability and smooth movement.
Professional Workflow: How to Use the Workshop Stool Efficiently
- Clear the work area: Remove loose parts, cables, or obstacles from the rolling path.
- Assemble stool and perform visual inspection: Before first use, check all connection points and ensure the casters move freely.
- Adjust height appropriately: Choose a seat height that allows you to work without strain while keeping your shoulders relaxed.
- Place tools in the magnetic tray: Organize small parts and frequently used tools directly under the seat.
- Work in short tracks: Instead of constantly standing up, move the stool in a controlled manner along the component using the casters.
- Approach intermediate positions cleanly: For difficult angles, it is better to reposition slightly several times than to reach too far.
- Clean after use: Clean the seat surface and tray with a suitable, non-corrosive cleaner and check the condition of the casters.
Troubleshooting in Practice
1. The stool is hard to roll
- Check the rolling path for dirt, sanding dust, or blocking small parts.
- Ensure the casters run freely and are correctly mounted.
- Regularly tighten the wheel nuts according to the manufacturer's instructions.
2. Sitting position feels unergonomic
- Readjust the height within the adjustment range instead of working permanently with a curved back.
- Optimize proximity to the component and avoid working from too great a distance.
- Arrange tools to avoid frequent twisting of the upper body.
3. Small parts are lost during the work process
- Consistently use the magnetic tool tray for screws, clips, and bits.
- Only carry relevant parts to keep the tray clear and organized.
- Store small parts separately according to work steps.
4. The stool appears to get dirty quickly
- Clean the vinyl cover regularly before oil or grease residues dry.
- Use only non-corrosive cleaners.
- Schedule a quick maintenance and visual check after intensive workshop days.
Maintenance: 5 Points for a Long Service Life
- Regularly check wheel nuts for tightness and retighten with 6.0 Nm according to the FAQ.
- Keep the vinyl seat surface clean with a non-corrosive cleaner.
- Check casters for dirt, fiber residues, and blocking particles.
- Regularly empty and clean the magnetic tray so that small parts do not stick unnecessarily.
- After assembly or frequent transport, recheck all screw connections at fixed intervals.
FAQ about the Colad Workshop Stool
Is the stool delivered assembled?
No. The Workshop Stool is delivered disassembled. Assembly instructions are included so that setup can be carried out easily.
For what kind of work is the stool particularly useful?
Primarily for tasks where a comfortable sitting position at difficult angles is important. This makes it interesting for precise work in the lower working area of the workshop.
What is the adjustment range?
As a guideline, the working height according to the technical data sheet is between approx. 46.5 cm and 57.5 cm.
What is the load capacity of the workshop stool?
The specified maximum load capacity is 136 kg or 300 lbs.
How is the stool maintained?
For a longer service life, we recommend regularly tightening the wheel nuts to 6.0 Nm and cleaning the cover with a non-corrosive cleaner.
View the Colad Workshop Stool Now
If you are looking for a robust, height-adjustable workshop stool with casters and a magnetic tray for efficient workflows, you can find the product page in the shop here.
To the ProductConclusion
The Colad Workshop Stool 1230528 is designed for clear practical benefit: ergonomic work at difficult angles, good mobility via five stable casters, and better organization through the integrated magnetic tray. Combined with the oil, grease, and dirt-resistant vinyl surface as well as clear maintenance instructions, it is a workshop stool that excels particularly in daily, repetitive use.
