Colad Industrial Nitrile Gloves: Safe Work with Solvent and Chemical Contact
How to choose, use, and maintain Colad Industrial Nitrile Gloves correctly – for maximum safety (PPE Cat. III) and efficient processes in painting, workshops & industry.
.png?ts=1759153050)
Product Overview
Colad Industrial Nitrile Gloves are designed for work with solvents and many chemicals, offering high wearing comfort and a grippy surface. Available in practical sizes – check your shop for availability.
| Variant | Article Code | Use | Features |
|---|---|---|---|
| M | 5330004 | Cleaning & chemical processing | Comfort fit, grippy surface |
| L | 5330000 | Recommended for continuous solvent contact | High comfort, reusable |
| XL | 5330002 | Industry & paint environment | Soft, anti-allergic inner lining |
Note: Sizes and availability may vary by shop (guidelines).
Order Colad Industrial Nitrile Gloves now
Go to ProductRecommended Basic Settings (Guidelines)
- Select size: M, L, XL – snug fit without pinching.
- Application: Suitable for continuous solvent contact as well as cleaning and painting tasks.
- Visual inspection: Always check for cracks/pores before use; do not use defective gloves.
- Interim cleaning: Use mild soap or low-pH, non-abrasive cleaners; allow to air dry fully.
- Documentation/Standards: Plan usage according to PPE Cat. III and tested standards (see below).
All information are guidelines; always follow the instructions on the manual and product page.
Professional Workflow: 6 Steps for Safe Use
- Determine the right size (M/L/XL) and check the packaging.
- Pre-check: Inspect glove for visible damage.
- Put on: Dry/clean hands; put on gloves smoothly, cuffs over sleeves.
- Work: During continuous solvent contact, check frequently; use grip, avoid unnecessary stress.
- Interim cleaning: Clean soiled gloves with mild soap, rinse with water, and air dry fully.
- Remove & store: Roll off from fingertips; store dry, clean, and as per manufacturer’s guidelines.
Troubleshooting
Maintenance & Care
- After use, wash with mild soap or low-pH, non-abrasive cleaners.
- Allow to fully air dry before reuse or storage.
- Replace damaged gloves immediately – do not reuse.
- Store clean and dry; avoid direct sunlight and heat sources.
- Conduct short visual and leak check before every use.
FAQ
M, L, XL (guidelines; shop availability may vary).
Yes, they are specifically recommended for this purpose.
Yes, they can be reused after cleaning and drying.
Chemical risks & microorganisms (EN ISO 374-1/-5), mechanical risks (EN 388), general requirements (EN ISO 21420), pesticide user requirements (ISO 18889).
EU type-examination by SATRA (2777), ongoing conformity check by SGS (0598).
Conclusion
Colad Industrial Nitrile Gloves combine certified protection (PPE Cat. III) with comfort and grip – ideal for painting, cleaning, and working with solvents. With proper selection, inspection, and care, you ensure quality and efficiency in daily use.
