Practical Guide
Cure Faster, Work Smarter – The Colad Fast Curing System
The Colad UV Curing Lamp (Art. No. 9000) is the core of the Fast Curing System. Designed for workshops focused on speed, precision, and process reliability. Using advanced UV LED technology, it cures fillers and coatings within seconds – delivering perfect surfaces with minimal waiting time.
Product Overview
| Feature | Description |
|---|---|
| Light Source | 18 high-intensity UV LEDs (≈ 300 mW/cm²) |
| Design | Lightweight, robust, hand-held with power cable |
| Cooling | Intelligent cooling ensures consistent performance |
| Delivery Contents | Lamp, UV safety glasses, fine filler, gloves, manual, warranty card |
| Applications | Spot repair, micro holes, dents, stone chips |
+60% Faster
for localized repairs
for localized repairs
Up to 1 mm
curing depth per layer
curing depth per layer
Stable Output
thanks to intelligent cooling
thanks to intelligent cooling
💡 Pro Tip: Apply multiple thin layers (≤ 1 mm each) and cure directly one after another – no waiting time needed.
Recommended Base Settings (Guidelines)
- Curing distance: approx. 5–10 cm
- Exposure time: 3–5 seconds per layer
- Layer thickness: max. 1 mm
- Ambient temperature: 15–30 °C
- Safety: Always wear UV-protection glasses and gloves
Professional Workflow (SMART Repair – 7 Steps)
- Clean and sand the damaged area
- Degrease with turquoise cleaning wipes (Art. No. 8850)
- Apply UV Filler Coarse (915020)
- Cure using the UV Lamp (Art. No. 9000)
- Apply UV Filler Fine (915011) and cure again
- Apply control powder (8035) and sand
- Clean the surface and prepare for paint application
Troubleshooting
- Incomplete curing: Check curing distance; move lamp closer if needed.
- Surface cracking: Layer too thick – apply thinner layers.
- Uneven hardness: Move the lamp evenly over the area.
- Dust inclusion: Clean the surface thoroughly before application.
Maintenance & Safety
- Clean LED front regularly with a soft cloth
- Check cable for wear or bending
- Keep ventilation slots dust-free
- Always wear UV safety glasses (Art. No. 5087)
- Use only original Colad accessories
FAQ
- How fast does it cure? Within seconds depending on layer thickness.
- Can it be used for clear coats? No, only for UV-curable fillers and primers.
- Does it need a special power source? No, a standard power outlet is sufficient.
- How to check full curing? Surface appears matte and dry, no sticky spots.
- What’s the lamp lifespan? Approx. 20,000 hours under normal use.
Optimize your repair process with the Colad Fast Curing System.
Discover NowSource: Colad Product Sheet UV Curing Lamp Art. No. 9000 – Fast Curing System Brochure (Product & Workflow Sections).
