Colad Ceramic Protection – Premium 9H Coating for Paint, Plastic & Metal
Colad Ceramic Protection (Art. 9068) delivers durable protection against weather, chemicals, UV radiation, and micro-scratches. The ultra-hard, silicon-free 9H coating forms a hydrophobic ceramic layer that lasts up to 2 years or 50 washing cycles — ideal for professional body shops and detailers.
Product Overview
| Property | Value / Description |
|---|---|
| Hardness | 9H (maximum surface hardness) |
| Heat resistance | up to 1000°C |
| Curing time | 4h touch dry / 7 days washable / 28 days full cure |
| Coverage | 1x 38 ml bottle covers 1 SUV or 2 small cars |
| Color | Transparent |
9H Hardness
Offers strong, lasting resistance against scratches, chips, and chemical impact.
UV Application Control
Visible under UV light — ensures even application without missed areas.
Hydrophobic Effect
Water, dirt, and insect marks simply roll off — easy-to-clean surface finish.
Recommended Application Parameters (Guidelines)
- Working temperature: 5–30 °C
- Surface must be clean, dry, and dust-free
- Wear nitrile gloves and UV goggles if using UV light
- One single layer is sufficient for full protection
- Touch cure: 4 h, full cure after 28 days
Professional Workflow – 6 Steps
- Thoroughly wash and dry the vehicle.
- Decontaminate and degrease using Colad Surface Preparation.
- Soak the microsuede applicator with a few drops of Ceramic Protection.
- Apply evenly to 50×50 cm sections.
- Inspect under UV light and correct missed spots immediately.
- Touch dry after 4 hours, washable after 7 days.
Troubleshooting
- Streaking: Applied too thick – wipe excess immediately.
- Uneven gloss: Surface not properly degreased – re-clean and reapply.
- Water spots after washing: Insufficient curing time – allow at least 7 days before washing.
- Loss of hydrophobic effect: Reapply or polish after about 2 years.
Maintenance & Care
- Use pH-neutral shampoos only
- Avoid harsh solvents or alkaline cleaners
- Do not wash under direct sunlight
- Dry the vehicle with a microfiber towel after each wash
- Check hydrophobic performance annually
FAQ – Common Questions
- How long does it last? Up to 2 years or 50 washing cycles under normal conditions.
- Is it body-shop safe? Yes, it’s silicon-free and safe to use inside spray booths.
- How do I check coverage? The coating glows under UV light – easy to verify complete coverage.
- Can I re-cure it? No, curing occurs naturally; reapply after ~2 years if needed.
- How can I remove it? Only by polishing or sanding once fully cured.
Conclusion
Colad Ceramic Protection is the ideal professional-grade coating for long-lasting, durable surface protection. With 9H hardness, UV control, and a hydrophobic finish, it delivers premium results — whether in the workshop or during vehicle detailing.
