Practical Guide
.png?ts=1759757755)
Safe and Comfortable Painting with the Colad A1P2 Spray Mask
In professional painting, respiratory protection is not optional – it’s essential. The Colad A1P2 spray mask combines certified safety with exceptional comfort. This guide explains how to use, maintain, and get the most out of your mask for every paint job.
Product Overview
| Specification | Value / Description |
|---|---|
| Product Type | Half mask with two A1 activated carbon filters and 20 P2 pre-filters |
| Protection Class | A1 for organic vapors + P2 for particulates |
| Material | Flexible synthetic material (grey) |
| Valves | Two inhalation valves and one exhalation valve made of silicone and natural rubber |
| Adjustable Fit | Headband with neck strap for perfect adjustment |
| Service Life | Up to 40 hours per filter unit (reference value) |
| Certification | EN 140:1999 / CE 0159 / PPE Category III |
40 h
max. per filter unit
max. per filter unit
A1 + P2
Dual protection system
Dual protection system
CE 0159
Certified safety
Certified safety
Pro Tip: Always store your spray mask in the supplied airtight box to significantly extend the life of the carbon filters.
Pro Workflow: 6 Steps to Perfect Use
- Remove the mask from its airtight box and inspect visually.
- Check filter units – A1 and P2 filters must be securely seated.
- Put on the mask and adjust the head and neck straps for a tight fit.
- Perform a leak test before starting work (inhalation test).
- Wear the mask continuously during all painting or sanding operations.
- After use, close the storage box tightly to protect filters.
Troubleshooting
- Fogged glasses: Re-adjust head strap; check exhalation valve for dirt.
- Unpleasant odor: Replace filter after 40 h or when needed; store airtight.
- Leaking fit: Clean rubber edges and ensure hair-free sealing area.
- Breathing resistance: Replace P2 pre-filters and check carbon filters.
Maintenance & Care
- Replace filters every 40 hours or when odors appear.
- Inspect mask regularly for damage.
- Clean valves with mild detergent.
- Store the mask dry and dust-free.
- Always use the airtight storage box.
FAQ – Frequently Asked Questions
- How long do the filters last? Up to 40 hours per unit (depending on use).
- Is the mask reusable? Yes, as long as filters are replaced regularly.
- Can I wear it with glasses? Yes, the flexible design and neck strap allow comfort with eyewear.
- What standards does it meet? UNE-EN 140, CE 0159, PPE Cat. III.
- What does it protect against? Organic vapors (A1) and fine dust or sanding particles (P2).
All data are indicative reference values according to manufacturer information.
