S 710 Beschichtpunkt with 700cc tank, 1.5 mm nozzle

The S 710 spray gun with a 700 cc reservoir is designed for professional coating and painting work and combines precise material atomisation with a reliable material supply via a suction system. Thanks to the range of nozzle options, the gun can be flexibly adapted to different materials and applications. Matching spare and wear parts for the suction cup are also available.

System & Application

The S 710 is suitable for painting, coating and application processes where a continuous supply of material via a suction cup is required. The 700 cm³ container capacity allows for longer working intervals without frequent refilling. The various nozzle diameters enable optimal adaptation to fine paints, primers and materials with higher viscosity.

Product variants

1071110 – S 710 spray gun with 700 cc reservoir and 1.0 mm nozzle
1071113 – S 710 spray gun with 700 cc reservoir and 1.3 mm nozzle
1071115 – S 710 spray gun with 700 cc reservoir and 1.5 mm nozzle
1071118 – S 710 spray gun with 700 cc reservoir and 1.8 mm nozzle
71000SE – 700 cc suction cup, autoclavable
107111 – Seal for suction cup
107112 – Drip stopper for suction cup

Technical specifications

Unit type: S 710 spray gun with suction system
Available nozzle diameters: 1.0 mm / 1.3 mm / 1.5 mm / 1.8 mm
Tank capacity: 700 cm³ (700 cc)
Material feed: Suction cup system
Accessories: Suction cup, seal and drip stopper
Suction cup design: Autoclavable

The different nozzle diameters allow the system to be adapted to suit various coating materials. Smaller nozzles are suitable for finer surfaces and precise applications, whilst larger nozzles offer a higher material throughput for primers or more viscous materials.

The autoclavable suction cup supports applications with increased requirements for cleaning and reusability. The seal and drip stopper serve as replacement or wear parts to ensure a reliable material feed and clean operation.

Note: The product information provided does not include any further technical data such as operating pressure, air consumption, connection sizes, weight or the material composition of the spray gun. This information should be obtained exclusively from the technical documentation.