Advice +49 7546 3520019

  Free DE shipping from €250

  14 days free exchange

  Market leading best price guarantee

Scope of delivery

WIWA thick-film / mortar pump 600.12 fully assembled:

  • Air motor D200/120
  • Fluid pump 600/120 R with UHMW-PE packings
  • Air service unit
  • Air filter with metal bowl
  • Cart
  • Operating manual

Not included: accessory kit 0653594 (hose package and spray lance), thick-material agitator 0652214 and air hose.

Also interesting
Product information

WIWA thick-film / mortar pump – convey and spray thick materials and mortar quickly and with little wear

The WIWA thick-film and mortar pumps of the 410.09 and 600.12 series process epoxy- and water-based thick materials and mortars – for example cement mortar, cementitious fire protection materials, cement slurries and filled vinyl esters. Unlike screw pumps, they can easily be flushed and cleaned with thinner and are therefore also suitable for epoxy-based materials. Thanks to quick couplings, the fluid pumps consisting of just a few parts can be dismantled, cleaned and reassembled very quickly – important with today's short pot lives and on site.

Your benefits

  • Quick maintenance: quick couplings and few parts – fluid pump dismantled, cleaned and reassembled in no time
  • Less downtime: significantly shorter downtime, especially on site
  • Flushable: unlike screw pumps, can be cleaned with thinner – also for epoxy thick materials
  • Low wear: large-volume pumps with extra-large passages and slow pump speed
  • Removable feed hopper: quick to clean
  • Made in Germany: designed, built and tested by WIWA in Lahnau

At a glance

  • 2 models: 410.09 (9:1) and 600.12 (12:1)
  • 410 or 600 cm³ per double stroke – 24.6 or 36 l/min at 60 double strokes
  • Operating pressure 72 or 96 bar
  • Stainless fluid pump with UHMW-PE packings
  • on cart; min. 3,000 l/min compressor output recommended

Which model is right for you?

ModelPressure ratiocm³ per double strokemax. l/minmax. operating pressuremax. air inlet pressure
410.099:141024.672 bar8 bar
600.1212:16003696 bar8 bar

Typical materials

  • Cement mortar and cement slurries
  • Cementitious fire protection materials
  • Filled vinyl esters
  • Epoxy- and water-based thick materials

Applications

  • Ship and ferry decks
  • Concrete and building refurbishment
  • Basement waterproofing
  • Fire protection
  • Tunnels, building and civil engineering

Good to know

WIWA also offers accessory kit 0653594 with a 10.5 m hose package (7.5 m + 3.0 m) and air-atomising spray lance, as well as the pneumatic thick-material agitator 0652214 – neither is included with the pump. We will be happy to advise you on your material.

More information
  • Product number: 2167915
  • Manufacturer: WIWA
  • EAN: 4255574653114
  • Weight: 92.454 kg

Technical details

This version
Manufacturer order number0652595
Model600.12
Pressure ratio12:1
Output per double stroke600 cm³
Max. output36 l/min
Max. operating pressure96 bar (1,392 psi)
Air motorD200/120
Air motor piston Ø / stroke200 mm / 120 mm
Fluid pump600/120 R
General (WIWA 410.09 / 600.12 series)
ManufacturerWIWA Wilhelm Wagner GmbH & Co. KG
Drivepneumatic (air-operated piston pump)
Max. air inlet pressure8 bar (116 psi)
Material of wetted partsstainless (R)
Packingsupper and lower UHMW-PE
Min. recommended compressor output3,000 l/min

Further manufacturer information

Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.

Downloads

Product video: WIWA

Reviews

of reviews

Average rating of 0 of 5 stars

Rate this product!

Share your experiences with other customers.