WIWA thick-film / mortar pump 410.09 (9:1) on cart
€11,008.10
€9,250.50*
Price excl. VAT
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
WIWA thick-film / mortar pump 410.09 fully assembled:
- Air motor D140/120
- Fluid pump 410/120 R with UHMW-PE packings
- Air service unit
- Air filter with metal bowl
- Cart
- Operating manual
Not included: accessory kit 0653594 (hose package and spray lance), thick-material agitator 0652214 and air hose.
WIWA thick-film / mortar pump – convey and spray thick materials and mortar quickly and with little wear
The WIWA thick-film and mortar pumps of the 410.09 and 600.12 series process epoxy- and water-based thick materials and mortars – for example cement mortar, cementitious fire protection materials, cement slurries and filled vinyl esters. Unlike screw pumps, they can easily be flushed and cleaned with thinner and are therefore also suitable for epoxy-based materials. Thanks to quick couplings, the fluid pumps consisting of just a few parts can be dismantled, cleaned and reassembled very quickly – important with today's short pot lives and on site.
Your benefits
- Quick maintenance: quick couplings and few parts – fluid pump dismantled, cleaned and reassembled in no time
- Less downtime: significantly shorter downtime, especially on site
- Flushable: unlike screw pumps, can be cleaned with thinner – also for epoxy thick materials
- Low wear: large-volume pumps with extra-large passages and slow pump speed
- Removable feed hopper: quick to clean
- Made in Germany: designed, built and tested by WIWA in Lahnau
At a glance
- 2 models: 410.09 (9:1) and 600.12 (12:1)
- 410 or 600 cm³ per double stroke – 24.6 or 36 l/min at 60 double strokes
- Operating pressure 72 or 96 bar
- Stainless fluid pump with UHMW-PE packings
- on cart; min. 3,000 l/min compressor output recommended
Which model is right for you?
| Model | Pressure ratio | cm³ per double stroke | max. l/min | max. operating pressure | max. air inlet pressure |
|---|---|---|---|---|---|
| 410.09 | 9:1 | 410 | 24.6 | 72 bar | 8 bar |
| 600.12 | 12:1 | 600 | 36 | 96 bar | 8 bar |
Typical materials
- Cement mortar and cement slurries
- Cementitious fire protection materials
- Filled vinyl esters
- Epoxy- and water-based thick materials
Applications
- Ship and ferry decks
- Concrete and building refurbishment
- Basement waterproofing
- Fire protection
- Tunnels, building and civil engineering
Good to know
WIWA also offers accessory kit 0653594 with a 10.5 m hose package (7.5 m + 3.0 m) and air-atomising spray lance, as well as the pneumatic thick-material agitator 0652214 – neither is included with the pump. We will be happy to advise you on your material.
| Item type: | Pumpen |
|---|
- Product number: 2174798
- Manufacturer: WIWA
- EAN: 4255574653282
- Weight: 55.076 kg
Technical details
| This version | |
|---|---|
| Manufacturer order number | 0653609 |
| Model | 410.09 |
| Pressure ratio | 9:1 |
| Output per double stroke | 410 cm³ |
| Max. output | 24.6 l/min |
| Max. operating pressure | 72 bar (1,044 psi) |
| Air motor | D140/120 |
| Air motor piston Ø / stroke | 140 mm / 120 mm |
| Fluid pump | 410/120 R |
| General (WIWA 410.09 / 600.12 series) | |
| Manufacturer | WIWA Wilhelm Wagner GmbH & Co. KG |
| Drive | pneumatic (air-operated piston pump) |
| Max. air inlet pressure | 8 bar (116 psi) |
| Material of wetted parts | stainless (R) |
| Packings | upper and lower UHMW-PE |
| Min. recommended compressor output | 3,000 l/min |
Further manufacturer information
Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.
Downloads
- WIWA DICKSCHICHT / MÖRTEL brochure (PDF, English)
- WIWA operating manual 0550035 (PDF, English)
- Spare parts list Air motor (0638915) (PDF)
- Spare parts list Fluid pump (0648810) (PDF)
Product video: WIWA
Register