WIWA PROFESSIONAL GX 230063 airless sprayer 63:1 on cart, stainless steel
Price on request
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
WIWA PROFESSIONAL GX airless sprayer model 230063 fully assembled:
- Air motor D230/120
- Fluid pump 153/120 RS
- Air service unit (air regulator)
- High-pressure filter 13GX
- Cart
- Operating manual
Not included: spray gun, high-pressure fluid hose, tip and air hose – available separately.
WIWA PROFESSIONAL GX – the all-metal high-performance airless unit for heavy-duty corrosion protection
The WIWA PROFESSIONAL GX is the evolution of the proven PROFESSIONAL series: high-performance airless units with the GX motor generation in an all-metal housing for the toughest conditions in steel and bridge construction, shipbuilding, offshore and painting lines. Optimised air distribution minimises icing in continuous operation and reduces noise, while low-maintenance fluid pumps cut operating costs. All pumps are made of rust- and acid-resistant stainless steel and are therefore also suitable for waterborne materials. Four models from 27:1 to 63:1 with up to 21.6 l/min cover everything from high-viscosity 2K material to large-area coating.
Your benefits
- All-metal construction: durable GX motor housing for tough continuous use
- Less icing, quieter: optimised air distribution with large air channels, quick exhaust valves and silencer
- Maintenance-free control: reliable changeover of the air motor without maintenance
- Robust fluid pump: hard-chromed double piston, spring-loaded packings, large valves with carbide valve seats and stainless steel balls
- Solvent cup: separates air motor and fluid pump, keeps out foreign particles and protects the packings
- Stainless steel (RS): all pumps rust- and acid-resistant – also for waterborne paints
- Long-lasting: spare parts for WIWA PROFESSIONAL units can usually still be supplied after more than 20 years
- Made in Germany: designed, built and tested by WIWA in Lahnau
At a glance
- 4 models: pressure ratio 27:1 to 63:1
- Output 153 to 360 cm³ per double stroke – up to 21.6 l/min at 60 double strokes
- Operating pressure up to 441 bar
- Air motor D230/120 with air service unit, high-pressure filter type 13GX
- Versions: cart, lifting cart, wall mount
Which model is right for you?
| Model | Pressure ratio | cm³ per double stroke | max. l/min | max. operating pressure | max. air inlet pressure |
|---|---|---|---|---|---|
| 230063 | 63:1 | 153 | 9.2 | 441 bar | 7 bar |
| 230051 | 51:1 | 189 | 11.3 | 408 bar | 8 bar |
| 230035 | 35:1 | 275 | 16.5 | 280 bar | 8 bar |
| 230027 | 27:1 | 360 | 21.6 | 216 bar | 8 bar |
Rule of thumb: a higher pressure ratio gives more pressure reserve for high-viscosity materials, large tips and long hoses; a larger output per double stroke gives more material throughput, e.g. for several guns.
Typical materials
- Abrasive materials, fire protection materials, glass flake
- Insulating and thick-film materials, cold bitumen
- Antifoulings, materials with short fibre fillers
- 2K and coal-tar epoxy paints (high-viscosity and coarsely pigmented)
- Low-solvent and solvent-free paints, sprayable paints and lacquers
Applications
- Large surfaces, ship coatings, marine and offshore industry
- Steel, hall and bridge construction, railcar factories
- Building and corrosion protection, insulation, fire protection
- Industrial coating, painting companies
- Pipes and pipelines, wind power, road marking
- Feed pump for painting lines
Good to know
The PROFESSIONAL GX is supplied as a spray unit without gun, high-pressure hose and tip – suitable options are e.g. the WIWA 500 D, 500 F or the WIWA 300 and 225/250/400 automatic guns. For heated application there is the WIWA fluid heater. As a 2K system the pump is available in the WIWA FLEXIMIX 2 PROFESSIONAL GX.
| Item type: | Pumpen |
|---|---|
| Method of assembly: | Fahrgestell |
| Type of material: | Edelstahl |
- Product number: 2174732
- Manufacturer: WIWA
- EAN: 4255574656702
- Weight: 108.307 kg
Technical details
| This version | |
|---|---|
| Manufacturer order number | 0664095 |
| Model | PROFESSIONAL GX 230063 |
| Version | on cart |
| Pressure ratio | 63:1 |
| Output per double stroke | 153 cm³ |
| Max. output | 9.2 l/min |
| Max. operating pressure | 441 bar (6,396 psi) |
| Max. air inlet pressure | 7 bar (102 psi) |
| Fluid pump | 153/120 RS |
| Material feed | – |
| General (PROFESSIONAL GX series) | |
| Manufacturer | WIWA Wilhelm Wagner GmbH & Co. KG |
| Air motor | D230/120 |
| Material of wetted parts | stainless steel, rust- and acid-resistant (RS) |
| Packings | upper and lower mixed PTFE graphite/leather |
| High-pressure filter | 13GX |
Further manufacturer information
Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.
Downloads
- WIWA PROFESSIONAL GX brochure (PDF, English)
- WIWA operating manual 0550022 (PDF, English)
- Spare parts list 0664095 (PDF, multilingual)
Product video: WIWA
Register
