WIWA PROFESSIONAL CLASSIC 24071 airless sprayer 71:1 wall-mounted
Price on request
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
WIWA PROFESSIONAL CLASSIC airless sprayer model 24071 fully assembled:
- Air motor D230/120
- Fluid pump 138/120 N
- High-pressure filter 11/N
- Air service unit 3/4" with pressure gauge
- Wall mount
- Suction hose RS DN25
- Operating manual
Not included: spray gun, high-pressure fluid hose, tip and air hose – available separately.
WIWA PROFESSIONAL CLASSIC – the high-performance airless class for heavy-duty corrosion protection
The WIWA PROFESSIONAL CLASSIC is the proven high-performance airless series for industrial coating work of all kinds. It shows its strengths in the toughest use – in shipbuilding, the marine and offshore industry, steel and bridge construction and painting lines. Thanks to their high pressure ratio, models 28064 and 24071 are particularly suitable for high-viscosity, low-solvent and solvent-free materials with a high solids content; they are ideal for long fluid hoses, large tip orifices and high spray pressures. Model 44032 delivers up to 44 l/min for large surfaces.
Your benefits
- Extremely durable: spare parts for WIWA PROFESSIONAL units can usually still be supplied after more than 20 years
- High pressure reserves: up to 71:1 and 460 bar for long hoses, large tips and high-viscosity materials
- Air motor: few components, clearly visible trip rods, hardly noticeable pulsation thanks to extremely fast changeover
- Closed solvent cup: keeps out foreign particles such as abrasive, prevents build-up on the piston rod and lubricates the packings
- Easy-service fluid pump: union nuts or direct screw connection, guided components, large bores and passages for low pressure loss
- Standard equipment: high-pressure filter at the pump outlet and air service unit with pressure gauge
- Made in Germany: designed, built and tested by WIWA in Lahnau
At a glance
- 3 models: 24071 (71:1), 28064 (64:1), 44032 (32:1)
- Output 138 to 306 cm³ per double stroke, up to 44 l/min
- Operating pressure up to 460 bar
- Air motor D230/120, fluid pump in carbon steel (N)
- Versions: cart, lifting cart, wall mount
Which model is right for you?
| Model | Pressure ratio | cm³ per double stroke | max. l/min | max. operating pressure | max. air inlet pressure |
|---|---|---|---|---|---|
| 24071 | 71:1 | 138 | 24 | 460 bar | 6.5 bar |
| 28064 | 64:1 | 153 | 28 | 450 bar | 7 bar |
| 44032 | 32:1 | 306 | 44 | 255 bar | 8 bar |
Rule of thumb: a higher pressure ratio gives more pressure reserve for high-viscosity materials, large tips and long hoses; a larger output per double stroke gives more material throughput, e.g. for several guns.
Typical materials
- Abrasive materials, fire protection materials, glass flake
- Insulating and thick-film materials, cold bitumen, antifoulings
- Materials with short fibre fillers
- 2K and coal-tar epoxy paints
- Low-solvent and solvent-free paints, sprayable paints and lacquers
Applications
- Large surfaces, ship coatings, offshore industry
- Steel and hall construction, railcar factories
- Industrial coatings, painting companies
- Building and corrosion protection, insulation, fire protection
- Feed pump
Good to know
Important: the PROFESSIONAL CLASSIC is only available in carbon steel and is therefore not suitable for waterborne materials. For waterborne paints WIWA recommends the stainless steel PROFESSIONAL GX. The unit is supplied without gun, high-pressure hose and tip – suitable options are e.g. WIWA 500 D or 500 F; for heated application there is the WIWA fluid heater.
| Item type: | Pumpen |
|---|---|
| Method of assembly: | Wandmontage |
- Product number: 2174724
- Manufacturer: WIWA
Technical details
| This version | |
|---|---|
| Manufacturer order number | 0639062 |
| Model | PROFESSIONAL CLASSIC 24071 |
| Version | wall-mounted |
| Pressure ratio | 71:1 |
| Output per double stroke | 138 cm³ |
| Max. output | 24 l/min |
| Max. operating pressure | 460 bar (6,672 psi) |
| Max. air inlet pressure | 6.5 bar (94 psi) |
| Fluid pump | 138/120 N |
| High-pressure filter | 11/N |
| Material feed | Suction hose DN25 |
| General (PROFESSIONAL CLASSIC series) | |
| Manufacturer | WIWA Wilhelm Wagner GmbH & Co. KG |
| Series | WIWA PROFESSIONAL CLASSIC |
| Drive | pneumatic (air-operated piston pump) |
| Air motor | D230/120 |
| Material of wetted parts | galvanised carbon steel, not stainless (N) |
| Packings | upper and lower mixed PTFE graphite/leather |
Further manufacturer information
Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.
Downloads
- WIWA PROFESSIONAL CLASSIC brochure (PDF, English)
- Operating manual on request
- Spare parts list Air motor (0638442) (PDF)
- Spare parts list Fluid pump (0638686) (PDF)
Product video: WIWA
Register