WIWA INJECT 2K 14015 GX 2K injection pump 1:1, on stand frame
€7,163.38
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
WIWA INJECT 2K 14015 GX, fully assembled:
- 2K high-pressure metering pump with air motor D140/75 and 2 fluid pumps 72.2/75 RS
- Maintenance unit with air regulator G 1/4"
- Suction system: 2 suction hoses NW13 (blue/red)
- Material outlet with ball valve and 2 pressure gauges, pressure relief for components A and B
- 2 material hoses 7.5 m ¼"
- 2K mixing unit G 1/4" DN6 with static mixer (flushing via component A): 2 ball valves, 2 check valves, mixing tube with 6 grid mixers, 0.3 m whip hose, slide coupling and hydraulic nozzle
- stand frame
- Bottle of separating agent
- Operating manual with spare parts list
Not included: Injection gun, packers and injection material – available separately.
Price excl. VAT
WIWA INJECT 2K 14015 GX – compact 2K injection pump for every job site
The WIWA INJECT 2K 14015 GX is a pneumatic 2K piston pump with a fixed 1:1 mixing ratio. Both fluid pumps are directly connected to the air motor – this positive drive rules out mixing errors. With 144 cm³ per double stroke at up to 120 bar it offers a high output, making it a strong solution for 1:1 reaction resins and foams. Thanks to its compact, lightweight design and short fluid pumps it fits into almost any car and also reaches places that are difficult to access. As standard, the mixing unit is flushed via component A.
Your benefits
- High mixing accuracy: positively driven material feed – mixing errors are impossible
- Handy and compact: short fluid pump design – fits into virtually any car
- For viscous materials: large material inlets and large-diameter check valves
- Full control: two pressure gauges on the material outlet show the injection pressure of both components
- Ready to go: quick start-up, easy maintenance, fast and easy cleaning
- Expandable: ATEX or Steck-O version on request, compatible with the WIWA INJECT GUARD
At a glance
- Fixed mixing ratio 1:1
- Pressure ratio 15:1, 144 cm³ per double stroke
- Max. operating pressure 120 bar
- Air motor D140/75, fluid pumps 72.2/75 RS
- Versions: stand frame or cart, galvanised carbon steel
Typical materials
- 2K injection resins and polyurethane resins
- Silicate resins
- PUR injection foam resins, PUR combination injection resins, PUR casting foam resins
- Injection foams
Applications
- Excavation pit sealing
- Ground injection and soil stabilisation
- Void filling
- Retrofitted horizontal barriers
- Sewer rehabilitation
- 2K crack injection
Good to know
For surface and curtain injection as well as acrylate gels WIWA recommends the stainless steel version (RS) – available on request. As standard, the mixing unit is flushed via component A; a version with a separate flushing pump is available on request.
| Item type: | Kolbenpumpe |
|---|---|
| Method of assembly: | Gestell |
| Type of material: | Normalstahl |
- Product number: 2174841
- Manufacturer: WIWA
- Weight: 26 kg
Technical details
| This version | |
|---|---|
| Manufacturer order number | 0669323 |
| Model | INJECT 2K 14015 GX |
| Pressure ratio | 15:1 |
| Output per double stroke | 144 cm³ |
| Max. operating pressure | 120 bar (1,740 psi) |
| Max. air inlet pressure | 6.5 bar (94 psi) |
| Mixing ratio | 1:1 |
| Air motor | D140/75 |
| Fluid pump(s) | 2 × 72.2/75 RS |
| Material | galvanised carbon steel, not stainless (N) |
| Frame | stand frame |
| General | |
| Manufacturer | WIWA Wilhelm Wagner GmbH & Co. KG |
| Series | WIWA INJECT 2K |
| Drive | pneumatic (compressed air) |
Further manufacturer information
Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.
Downloads
- WIWA Injection and Building Protection brochure (PDF, English)
- WIWA operating manual 0550058 (PDF, English)
- Spare parts list 0669323 (PDF, multilingual)
Product video: WIWA
Register
