WIWA foundry coating system PROFESSIONAL CLASSIC 28023 (23:1) on cart
€10,470.81
€8,799.00*
Price excl. VAT
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
WIWA coating system for foundry coatings, fully assembled:
- Air motor D140/120
- Fluid pump 153/120 R
- High-pressure filter type 11/R
- Air service unit G 3/8" with pressure gauge
- Cart
- Suction hose DN25
- WIWA 500 F airless gun with shut-off and swivel
- Operating manual
Not included: agitator 0660874 (required in addition), high-pressure fluid hose, tip and air hose.
WIWA coating system for foundry coatings – coat moulds and cores evenly
Foundry coatings form the necessary barrier between sand and metal: they ensure that the casting separates easily from the moulding material after pouring, reduce the surface roughness of moulds and cores and so help to produce smooth cast surfaces. With the WIWA coating systems for foundry coatings, polystyrene and sand patterns are coated using the airless method – airless spraying produces significantly less overspray than air-atomising systems. WIWA offers two systems: the low-pressure system 10:1 with UHMW-PE packings, agitator and single-post lift, and the PROFESSIONAL CLASSIC 28023 with 23:1 and up to 28 l/min.
Your benefits
- Less overspray: airless application instead of air atomisation – less material loss, cleaner foundry
- Easy release: even coating layer for clean separation of casting and moulding material
- Smooth cast surfaces: the coating reduces the surface roughness of moulds and cores
- Complete system: including WIWA 500 F airless gun with shut-off
- Low-pressure system with agitator: pneumatic agitator and mobile single-post lift for 20 and 30 l containers
- Made in Germany: designed, built and tested by WIWA in Lahnau
At a glance
- 2 systems: low pressure 10:1 and PROFESSIONAL CLASSIC 28023 (23:1)
- Output 72 or 153 cm³ per double stroke, 10 or 28 l/min
- Operating pressure 80 or 185 bar
- for polystyrene and sand patterns
- including WIWA 500 F airless gun with shut-off
Which model is right for you?
| Model | Pressure ratio | cm³ per double stroke | max. l/min | max. operating pressure | max. air inlet pressure |
|---|---|---|---|---|---|
| Low pressure 10:1 | 10:1 | 72 | 10 | 80 bar | 8 bar |
| PROFESSIONAL CLASSIC 28023 | 23:1 | 153 | 28 | 185 bar | 8 bar |
Applications
- Foundries: coating of moulds and cores
- Polystyrene patterns (lost foam)
- Sand patterns
- Steel construction and metal casting
Good to know
The PROFESSIONAL CLASSIC 28023 system additionally requires the WIWA agitator (order number 0660874); the low-pressure system already has its agitator on board. High-pressure fluid hose and tip are not included. We will be happy to advise you on the right equipment.
- Product number: 2168554
- Manufacturer: WIWA
- EAN: 4255574654074
- Weight: 82.22 kg
Technical details
| This version | |
|---|---|
| Manufacturer order number | 0656355 |
| Model | PROFESSIONAL CLASSIC 28023 |
| Pressure ratio | 23:1 |
| Output per double stroke | 153 cm³ |
| Max. output | 28 l/min |
| Max. operating pressure | 185 bar (2,683 psi) |
| Air motor | D140/120 |
| Fluid pump | 153/120 R |
| Packings | upper and lower mixed PTFE graphite/leather |
| Material of wetted parts | stainless (R) |
| General (PROFESSIONAL CLASSIC series) | |
| Manufacturer | WIWA Wilhelm Wagner GmbH & Co. KG |
| Drive | pneumatic (air-operated piston pump) |
| Max. air inlet pressure | 8 bar (116 psi) |
Further manufacturer information
Manufacturer: WIWA Wilhelm Wagner GmbH & Co. KG, Lahnau (Germany) – units are designed, built and tested in Lahnau.
Downloads
Register