Cleaning and drying the nozzle set – step-by-step instructions
A clean nozzle set is the basis for perfect painting results. Cleaning and drying the paint nozzle, air nozzle and paint needle properly ensures a long service life and optimal performance. This article provides instructions that are mainly based on pictorial explanations.
Step 1: Disassembling the nozzle set
Before you start cleaning, the individual components of the nozzle set must be safely removed:
- Pull out the paint needle (see picture).
- Loosen the paint nozzle with a tool wrench and carefully remove (see picture).
- Unscrew and remove the air cap (see picture).
Step 2: Cleaning the individual components
Each component of the nozzle set should be cleaned individually and carefully:
- Paint needle: Use a suitable cleaning agent such as SATA multi clean 2 and clean the paint needle carefully with a soft cloth (see picture).
- Fluid nozzle: Thoroughly flush the fluid nozzle with the cleaning agent and remove any residue with a cleaning tool (see picture).
- Air cap: Cleanthe air cap with a fine brush, making sure that no residue remains in the holes (see picture).
Step 3: Drying the nozzle set
After cleaning, all components must be dried completely:
- Use a blow gun to remove excess water from the holes (see picture).
- Place the cleaned parts on a clean cloth and let them air dry (see picture).
Frequently asked questions
Question: Why is it important to clean the nozzle set regularly?
Answer: Dirt can affect the spray quality and cause blockages. Regular cleaning ensures optimal results and extends the service life of your spray gun.
Question: Can I clean the nozzle set in an ultrasonic cleaning unit?
Answer: We do not recommend this as it can cause damage. Instead, use manual cleaning methods with appropriate tools and cleaning agents.
Discover more tips for cleaning and maintaining your spray gun in our blog posts.
