Cleaning and drying the gun body – step-by-step instructions
To ensure a long service life and flawless operation of your spray gun, it is essential to thoroughly clean and dry the gun body. These instructions show you the correct sequence of cleaning steps.
Step-by-step instructions for cleaning the spray gun body
- Insert the gun body: Insert the gun body securely into the cleaning station.
- Connect the air supply: Connect the air supply to the gun air inlet.
- Pre-cleaning with SATA multi clean 2: Perform a pre-cleaning with the cleaning agent SATA multi clean 2 to remove coarse residues.
- Start the washing cycle: Switch on the washing cycle. This includes rinsing and blow-drying.
- Remove the paint needle: First remove the paint needle to enable complete cleaning.
- Disassemble the air cap: Carefully removethe air cap.
- Disassemble the nozzle set: Remove the entire nozzle set to thoroughly clean all components.
- Remove the paint nozzle: Use a tool wrench to safely remove the paint nozzle.
- Clean the paint channel: Clean the paint channel thoroughly to remove all paint residue.
- Clean the gun body: Clean the entiregun body to remove dirt and residue.
Step-by-step drying instructions
- Drying the gun body: Use an air gun to completely dry the gun body.
Frequently asked questions
Question: Why is it important to follow the correct cleaning sequence?
Answer: The correct sequence ensures that all components are thoroughly cleaned and not damaged. This ensures that the spray gun functions optimally.
Question: Can I use other cleaning agents?
Answer: We recommend using SATA multi clean 2, as it has been specifically developed for cleaning paint spray guns.
These instructions will help you to keep your spray gun in top condition and extend its service life.