Practical Guide
Colad Hand Cleaner Extreme 250 ml – Fast, Strong & Skin-Friendly Cleaning
Removes extremely stubborn contaminants such as 2K paints, adhesives, polyurethane, epoxy, and polyester – without solvents, using natural walnut scrub and dermatologically tested (pH ≈ 6.5).
Introduction – The Professional Advantage
Designed for tough workshop conditions, Hand Cleaner Extreme removes extreme dirt quickly, is biodegradable, and thanks to its soft, solvent-free formula, it’s gentle on the skin. Perfect for bodyshops, paint repair, construction, and aerospace applications.
pH Value
≈ 6.5
skin-neutral • indicative value
Volume
250 ml
Bottle • Weight approx. 290 g
Skin-Friendly
Solvent-Free
Natural walnut scrub, dermatologically tested
Product Overview (Variants & Applications)
| Variant | Article No. | Applications | Key Features |
|---|---|---|---|
| Bottle 250 ml (Cream) | No. 8251 | Bodyshops, Paintwork, Construction, Aerospace | Solvent-free, di-basic esters, 100% walnut scrub, biodegradable; removes 2K paints, adhesives, PU, epoxy, polyester. |
| Pump Can 4 L | No. 8250 | Workshop / Stationary use (approx. 800 doses) | Same formula; convenient dosing system. |
| Wipes (Bucket/Refill) | No. 8255 | Mobile use – no water required | Impregnated; suitable for heavy industrial soiling. |
Pro Tip: For best performance, always start on dry hands and rinse with water only after the dirt has loosened – this allows the walnut scrub to work at full efficiency.
Order Colad Hand Cleaner Extreme 250 ml Now
Add to CartSolvent-free, dermatologically tested, with natural walnut scrub.
Recommended Application Settings (Indicative Values)
| Start | Apply a small amount to dry hands. |
|---|---|
| Mechanics | Massage thoroughly until dirt or paint dissolves. |
| Rinsing | Rinse off completely with water and dry your hands carefully. |
| Typical Contaminants | 2K paints & adhesives, polyurethane, varnish, epoxy, polyester. |
Note: These are indicative values – results depend on contamination level and drying time.
Professional Workflow (5–7 Steps)
- Remove coarse dirt with a cloth, then prepare dry hands.
- Apply a small amount of cleaner to your palms and spread evenly.
- Massage intensively, including between fingers and nails, until contamination dissolves.
- Rinse thoroughly with clean water.
- Dry hands completely with a towel or paper.
- Optionally: Apply Colad Hand Care Lotion for skin protection after work.
Troubleshooting
1) Paint or adhesive remains hard to remove
- Massage longer on dry hands before rinsing.
- Repeat the process if necessary; avoid letting paint dry completely.
2) Skin feels rough afterward
- Do not overdose; rinse thoroughly.
- Apply hand lotion afterwards to restore skin moisture.
3) Performance seems inconsistent
- Always start with dry hands (water dilutes the paste).
- Check storage conditions – keep cool and frost-free.
4) Product empties quickly or high consumption
- Use the 4L pump version for controlled dosing.
- Use wipes for mobile or occasional use.
Maintenance & Storage
- Store in a cool but frost-free environment.
- Keep out of reach of children.
- Check the expiry date printed on the packaging.
- Keep the cap clean and closed after each use.
- Do not dilute the product with water.
FAQ
- Is it suitable for sensitive skin? Yes – pH-neutral and dermatologically tested.
- Can I use it without water? Yes, temporarily – but rinsing with water ensures optimal cleaning.
- What is the walnut scrub? Finely ground natural walnut shells – an eco-friendly alternative to microplastics.
- How long does it last? Refer to packaging – typically 36 months from production.
- How to remove dried 2K paint? Reapply immediately after work, before full curing occurs.
Conclusion
Colad Hand Cleaner Extreme 250 ml is the perfect partner for workshops, painters, and industrial professionals. It combines maximum cleaning power with a skin-friendly, solvent-free formula – tough on dirt, gentle on hands.
