Sagola Classic Pro Suction Spray Gun with 21 Air Cap and 1.60 mm Nozzle (stainless steel)
€258.11
% Regular price: €302.00 (14.53% saved)€216.90*
Price excl. VAT
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Classic Pro suction spray gun
- Classic Pro air cap 21
- 1 l suction cup
- Stainless steel needle & nozzle kit 1.60 mm
Sagola Classic Pro Suction – the rugged suction cup gun
The suction version of the Sagola Classic Pro is the straightforward spray gun with a 1 l cup below the gun – for workshop and industry when working without a pressure pot. Air cap 21 and a stainless steel needle & nozzle kit in 1.60 or 1.80 mm are factory-fitted.
The gun meets EN 1953 and is approved to ATEX II 2G X for hazardous areas in zones 1 and 2.
At a glance
- 1 l suction cup: large capacity for less refilling
- Stainless steel needle and nozzle: 1.60 or 1.80 mm
- Air cap 21: available individually as a spare part (PT56418279)
- Explosion-proof: ATEX II 2G X for zones 1 and 2
- Accessories: RC2 air flow regulator with pressure gauge and suction cup filters as separate versions
Versions
| Version | Air cap | Nozzle (mm) | Manufacturer order number |
|---|---|---|---|
| Classic Pro Suction | 21 | 1.60 | PG10120701 |
| Classic Pro Suction | 21 | 1.80 | PG10120702 |
Good to know
- The “X” in the ATEX marking means static electricity is discharged through the air hoses – use static-free hoses.
- Clean thoroughly with a suitable solvent after each use; do not use abrasive or corrosive cleaners.
| Item type: | Saugbecherpistole |
|---|---|
| Nozzle size: | 1,6 mm |
- Product number: 2151351
- Manufacturer: Sagola
- Weight: 0.94 kg
- Length: 200 mm
- Width: 120 mm
- Height: 305 mm
Technical details
This version
| Manufacturer order number | PG10120701 |
| Air cap | 21 |
| Needle & nozzle kit | 1.60 mm, stainless steel |
Sagola Classic Pro – general
| Manufacturer order number | PG10120701 (1.60 mm), PG10120702 (1.80 mm) |
| Type | Suction spray gun with suction cup |
| Cup | 1 l |
| Air cap | 21 |
| Needle & nozzle kit | stainless steel, 1.60 or 1.80 mm |
| Standard | EN 1953:2013 |
| Explosion protection | ATEX II 2G X – zones 1 and 2; static is discharged via static-free air hoses |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Spare parts and accessories: air cap 21 (PT56418279), stainless steel needle & nozzle kits 1.60 mm (10011182) and 1.80 mm (10011183), suction cup filter, 10 pcs (PT56418014), RC2 air flow regulator with pressure gauge (40000335).
Downloads
Register