Sagola 475 XTech Gravity Spray Gun with 05 Air Cap and 0.50 mm Nozzle
€186.29
% Regular price: €235.19 (20.79% saved)€156.55*
Price excl. VAT
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Sagola 475 XTech Gravity Spray Gun
- 05 air cap
- 0.50 mm Needle & Nozzle Kit
- 125 ml gravity cup with anti-drip system
Sagola 475 XTech Gravity Spray Gun
The Sagola 475 XTech is the compact gravity spray gun for spot repair, feathering and touch-ups. Small dimensions and low weight make it precise in small areas.
Air caps 05 (0.50 or 0.80 mm) for feathering, 10 (1.00 mm) for clear coats and R5 (0.50 mm) for tiny feathering with an air consumption of only 45 l/min are available.
At a glance
- 125 ml cup: with anti-drip system
- Lightweight: 339.4 g with cup and air flow regulator
- Low air consumption: 45 to 110 l/min at 2 bar
- Spray distance: 18–20 cm
Versions at a glance
| Air cap / nozzle | Recommended for | Manufacturer order number |
|---|---|---|
| 05 / 0.50 mm | – | 20140801 |
| 05 / 0.80 mm | feathering (blend-in) | 20140802 |
| 10 / 1.00 mm | clear coats | 20140803 |
| R5 / 0.50 mm | tiny feathering | 20140804 |
Good to know
- Clean with brushes and a suitable cleaner only – never use metal tools on the bores.
- Lubricate the moving parts of the gun after every cleaning (Sagola grease 56418589).
| Nozzle size: | 0,5 mm |
|---|
- Product number: 2181413
- Manufacturer: Sagola
Technical details
This version
| Manufacturer order number | 20140801 |
| Air cap | 05 |
| Needle & nozzle kit | 0.50 mm |
| Air consumption at 2 bar | 100 l/min |
| Recommended pressure | 1.5–2.0 bar |
| Fluid output | 60 g/min |
| Fan size | 140 mm |
| Spray distance | 18–20 cm |
Sagola 475 XTech – general
| Manufacturer order number | 20140801, 20140802, 20140803, 20140804 |
| Manufacturer | SAGOLA S.A., Vitoria-Gasteiz (Spain) |
| Cup | 125 ml, with anti-drip system |
| Weight with cup | 339.4 g |
| Weight without cup | 272.9 g |
| Dimensions without cup | 10.9 × 3.3 × 15.2 cm |
| Air inlet | BSP 1/4″ male |
| Recommended working pressure | 2 bar |
| Air caps | 05, 10, R5 |
| Nozzle sizes | 0.50–1.00 mm |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Downloads
Register