Sagola 4600 DFT Digital (bar) Clear Spray Gun, 1.40 mm nozzle
€685.86
% Regular price: €963.90 (28.85% saved)
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Spray gun with aircap, 1.40 mm needle and nozzle fitted and integrated digital gauge
- 650 ml reusable paint cup
- Universal maintenance wrench
- Air valve wrench
- Cleaning brush
- Colour code rings
Sagola 4600 DFT Digital (bar) Clear Spray Gun
The Sagola 4600 DFT Digital (bar) Clear is designed for clearcoats (HS/UHS), single-stage paints and OEM-quality finishes – with ultra-fine atomisation, maximum application speed and minimal overspray. The digital version shows the pressure at the nozzle on the integrated digital gauge – this gun reads in bar.
Dynamic Flow Technology (DFT) uses the ambient air around the aircap: fine atomisation at lower pressure, a uniform fan from top to bottom, less bounce back and overspray – ideal for difficult effect colours. The metal-to-metal (M2M) design needs fewer seals and wear parts; the self-adjusting packing gland is tested to 2 million cycles.
At a glance
- Atomisation: Dynamic Flow Technology for fine, uniform atomisation at low pressure
- Low maintenance: metal-to-metal design with fewer seals and wear parts
- Trigger: 2-stage with no pressure drop, soft-flow fluid valve for precise control
- Cleaning: easy-release aircap for fast cleaning or change-over
- Approvals: approved by the leading paint manufacturers
- Warranty: 3-year manufacturer warranty
The four 4600 DFT aircaps compared
| Aircap | Use | Output flow | Air consumption | Fan width | Air inlet pressure |
|---|---|---|---|---|---|
| DVR BASE | waterborne and solvent basecoats, metallics, silvers, pearls | 191–227 g/min | 280 L/min | 290–315 mm | 1.8–2.0 bar |
| DVR HVLP | HVLP application of basecoats and specialist coatings | 170–198 g/min | 450 L/min | 290–325 mm | 2.0 bar |
| DVR CLEAR | HS/UHS clearcoats, single-stage paints, OEM-quality finishes | 185–219 g/min | 295 L/min | 275–295 mm | 2.2 bar |
| DVR CLEAR PRO | mirror finishes with express clearcoats and single-stage paints | 196–229 g/min | 315 L/min | 285–310 mm | 2.2 bar |
Nozzle sizes at a glance
- 1.20 mm: low-viscosity fast and express clearcoats
- 1.20 mm XL: low-viscosity fast and express clearcoats
- 1.30 mm: HS and UHS clearcoats
- 1.30 mm XL: single-stage topcoats
- 1.40 mm: single-stage topcoats
| Nozzle size: | 1,4 mm |
|---|
- Product number: 2181221
- Manufacturer: Sagola
Technical details
This version
| Manufacturer order number | 10142431 |
| EAN | 8423305334328 |
| Aircap | DVR CLEAR |
| Needle and nozzle | 1.40 mm |
| Recommended for | single-stage topcoats |
| Pressure gauge | digital, reading in bar |
| Output flow | 185–219 g/min |
| Air consumption | 295 L/min |
| Fan width | 275–295 mm |
| Application distance | 18–20 cm |
| Air inlet pressure | 2.2 bar |
Sagola 4600 DFT Digital (bar) Clear – general
| Technology | Dynamic Flow Technology (DFT), Metal-to-Metal (M2M) |
| Feed | gravity cup |
| Cup | 650 ml |
| Weight (with / without cup) | 665.6 g / 471 g |
| Air inlet | BSP 1/4" male (high flow) |
| Product filter | 80 mesh |
| Recommended working pressure | 2.0 bar (29 psi) |
| Sound pressure level | max. 80 dB(A) |
| Materials in contact with product | anodised aluminium, POM, stainless steel |
| Digital gauge battery | Duracell/Varta CR 1/3N, 3 V |
| ATEX | II 2G Ex ia IIC T4 Gb |
| Warranty | 3 years (manufacturer warranty) |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Downloads
Register