Maspra AirCombi Tip for Sagola – 10° / 0.019″ (119)
| Number | general.grossPriceTax | Price excl. VAT* |
|---|---|---|
| Until 3 |
€48.73
€49.00
(0.55% saved)
|
€40.95 |
| Away 4 |
€46.29
€49.00
(5.53% saved)
|
€38.90 |
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 1 Maspra AirCombi tip 10° / 0.019″ (119)
Maspra AirCombi tip for Sagola – angle and orifice to suit the job
In the AirCombi (air-assisted airless) process the tip atomises the material at high fluid pressure, while additional air at the air cap shapes and refines the spray. The result is a softer, more even pattern than pure airless – with less overspray than conventional air spraying. The Maspra AirCombi tip with stainless steel housing is designed as a compatible replacement for Sagola AirCombi guns.
The three-digit order code identifies the tip: the first digit is the spray angle (1 = 10° to 9 = 90°), the last two digits are the orifice in thousandths of an inch (13 = 0.013″). A wider angle gives a wider fan, a larger orifice more output – for thicker materials and large surfaces.
At a glance
- Stainless steel housing: robust and solvent resistant
- 100 versions: 10° to 90°, orifices 0.007″ to 0.029″
- Clear code logic: angle and orifice read directly from the order code
- Compatible with Sagola: replacement tip for Sagola AirCombi guns
Available versions
| Spray angle | Orifices | Order codes |
|---|---|---|
| 10° | 0.007″ – 0.023″ | 107 – 123 |
| 20° | 0.007″ – 0.029″ | 207 – 229 |
| 30° | 0.007″ – 0.029″ | 307 – 329 |
| 40° | 0.007″ – 0.029″ | 407 – 429 |
| 50° | 0.007″ – 0.029″ | 507 – 529 |
| 60° | 0.009″ – 0.029″ | 609 – 629 |
| 70° | 0.009″ – 0.029″ | 709 – 729 |
| 80° | 0.009″ – 0.029″ | 809 – 829 |
| 90° | 0.011″ – 0.029″ | 911 – 929 |
Good to know
- Spray angles of 100°, 110°, 120° and other sizes are available on request.
- Compatible part by Maspra, not an original Sagola part – please check your gun's tip seat before ordering.
- We are happy to help you choose angle and orifice.
- Product number: 2209141
- Manufacturer: Maspra
- Weight: 0.01 kg
Technical details
This version
| Manufacturer order number | MA-AC-S-119 |
| Spray angle | 10° |
| Orifice | 0.019″ (0.48 mm) |
| Order code | 119 |
Maspra AirCombi – general
| Manufacturer order number | MA-AC-S-107 … MA-AC-S-929 |
| Type | AirCombi tip (air-assisted airless) |
| Housing | stainless steel |
| Compatible with | Sagola AirCombi guns |
| Spray angle | 10° to 90° (per version) |
| Orifices | 0.007″ to 0.029″ (0.18–0.74 mm) |
| Part number scheme | MA-AC-S-xxx |
Further manufacturer information
Manufacturer: MASPRA – compatible AirCombi tip, not an original SAGOLA part. SAGOLA is a trademark of SAGOLA S.A.; the name is used only to indicate fit.
Register
