Manufacturer no.:
H60M10
The Pro Xp60 electrostatic manual air-assisted spray gun with Smart Display is suitable for standard coatings and can be used with AEM or AEF nozzles
€8,583.23*
% €12,261.76* (30% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
The Pro Xp60 kV air-assisted spray gun is the smallest and lightest air-assisted electrostatic spray gun on the market. It always delivers a uniform and high-quality coating. The Xp60 air-assisted gun series includes standard, smart and water-based models.
- High-quality coating performance with one-piece air cap and a wide range of spray nozzles
- Transfer efficiency is significantly improved compared to conventional air-assisted airless guns
- Made in the USA
- This air sprayer is the smallest gun on the market with a built-in power supply: 2.5 cm (1 inch) shorter and 110 g lighter
- Spray pattern adjustment control reduces overspray by changing the spray pattern width according to the size of the part: saving you money and improving quality
- Each gun is tested and supplied with a certificate stating that the spray pattern, mechanical and electrical performance meets Graco's requirements and your expectations
| Air inlet size (inches): | 1/4 |
|---|---|
| Air inlet thread type: | NPSM |
| Application: | Electrostatics, standard |
| Applicator type: | Hand- |
| Coating type: | standard |
| Compatible colour type: | Epoxy, High Solids, Clear Coats, Multi-Component Materials, Polyurethanes, Solvent Based, Urethane, UV Curing, Varnishes |
| Display type: | Smart |
| Gender of the air inlet thread: | External thread |
| Gender of the material inlet thread: | External thread |
| Gun activation: | Hand- |
| Gun type: | Electrostatics |
| Gun weight (g): | 660 |
| Gun weight (kg): | 0.66 |
| Gun weight (oz): | 23.28 |
| Includes: | Smart display, nozzle protection air cap, nozzle of your choice, tool kit, gun cover, exhaust pipe |
| Material inlet thread type: | NPSM |
| Maximum colour resistance (megohm/cm): | Infinite |
| Maximum material pressure (MPa): | 21 |
| Maximum material pressure (bar): | 210 |
| Maximum material pressure (kPa): | 21000 |
| Maximum material pressure (kg/cm²): | 214.14 |
| Maximum material pressure (psi): | 3000 |
| Maximum material temperature (°C): | 48 |
| Minimum colour resistance (megohm/cm): | 3 |
| Model: | Pro XP |
| Series: | 60 |
| Size of the air inlet (cm): | 635 |
| Size of the air inlet (mm): | 6.35 |
| Size of the material inlet opening (inches): | 1/4 |
| Spraying technology: | Electrostatics |
| Technology type: | Air-assisted |
| Total length (cm): | 24.64 |
| Total length (mm): | 246.4 |
| Type: | Electrostatic gun |
| Voltage (kV): | 60 |
More information
- Product number: 1031575
- Manufacturer: Graco
- EAN: 00633955248243
- Weight: 1.88 kg
- Length: 420 mm
- Width: 290 mm
- Height: 130 mm
Reviews
Register
