TexSpray APX 6200 plaster spraying device, sack press, 230V
€14,064.91*
% €16,546.95* (15% saved)Ready for shipping in 5-8 Werktage
The TexSpray APX 6200 plaster sprayer has been specially developed for smoothing and plastering plaster walls and is suitable for real professionals. This sprayer pumps even the heaviest materials with optimal flow and without pressure fluctuations. The all-in-one design is also easy to move around any job site.
A better, more consistent spray pattern with large nozzles, higher flow and less time spent trowelling the material. No more wasting time mixing or thinning the putty before spraying. No more problems with cavitation and idling of the pump with high-viscosity materials.
- Endurance Airless Piston Pump
- Proven to have the longest service life in the industry
- Available fully hard chrome plated or as a comprehensive MaxLife option, depending on the type of material to be used
- SmartControl 3.0
- Provides a consistent spray pattern without pressure fluctuations
- Extra-large LED display provides information on pressure, litres, hours and more
- Easy one-button adjustment
- ProConnect 2 one-piece pump replacement system
- No more costly downtime
- Replace your pump in less than 1 minute – without tools, pins or lost parts
- 60 litre container with VIBRA-FLO system
- The exclusive vibration system reliably conveys even the thickest materials to the pump
- Variable one-knob control
- Integrated system, no additional power cords required
- The maintenance system that takes all the worry out of maintenance
- Adjustable bag press
- Empty sacks completely, cleanly and without spilling
- Can be adjusted to any bag length
- Maintenance-free design
- Welded steel chassis
- Swivelling front wheel
- 3-wheel design with brake
- Easy to transport and store, only one employee required
- Integrated tool tray and lifting handles
- X-FLO hose with super-flex whip end
- Reduces pulsation and provides better surface appearance and less manual labour
- Heavy-duty construction
- Easy to clean
| Compatible material: | Filler, joint filler, finish |
|---|---|
| Convertible: | Not convertible |
| Double strokes per gallon: | 97 |
| Frame configuration: | Chassis with integrated material container |
| Frequency (Hz): | 50 |
| Hose diameter (inch): | 5/8 |
| Includes: | All devices are delivered complete and ready to spray: |
| Inner diameter of material hose (inch): | 1/2 |
| Material outlet size (mm): | 12.7 |
| Material outlet thread type: | NPSM |
| Maximum delivery rate (L/min): | 6 |
| Maximum nozzle size (inch): | 41 |
| Maximum nozzle size 1 gun (inch): | 41 |
| Maximum operating pressure (MPa): | 20.7 |
| Maximum operating pressure (kPa): | 20700 |
| Maximum operating pressure (kg/cm²): | 20.7 |
| Maximum operating pressure (psi): | 3000 |
| Maximum sound pressure level (dB(A)): | 84 |
| Minimum generator output (W): | 5000 |
| Minimum generator output (kW): | 0 |
| Model: | TexSpray |
| Motor size (kW): | 1.9 |
| Motor type: | Brushless, DC |
| Number of guns: | 1 |
| Permissible operating overpressure (psi): | 3000 |
| Permissible operating pressure (bar): | 207 |
| Phases: | 1 |
| Pressure control type: | SmartControl 3.0 |
| Pump rod type: | Hard chrome plated |
| Pump type: | Endurance |
| Rated power (kW): | 1.9 |
| Series: | APX 6200 |
| Size of the material outlet opening (inches): | 1/2 |
| Spray gun type: | HD inline plastering gun |
| Spraying technology: | Airless |
| Supply voltage: | Electric |
| Total height (cm): | 106.7 |
| Total height (mm): | 10,668,000 |
| Total length (cm): | 109.2 |
| Total length (mm): | 1092.2 |
| Total width (cm): | 63.5 |
| Total width (mm): | 6,350,000 |
| Type: | Airless sprayer |
| Voltage (V): | 230 |
| Volume per cycle (cycles/gal): | 97 |
| Weight (kg): | 69 |
| Wetted material: | Galvanized Carbon Steel, Nickel Plated Carbon Steel, Nylon, Stainless Steel, PTFE, Acetal, Leather, UHMWPE, Aluminum, Tungsten Carbide, PEEK, Brass, Hard Chrome Plated |
- Product number: 1033899
- Manufacturer: Graco
- EAN: 00755652419464
- Weight: 119.093 kg
Register
