Manufacturer no.:
FD7111
SaniForce 1040 S/S Air operated double diaphragm pump with DIN connection, 316 S/S seats, PTFE O-rings, balls & diaphragm
€5,840.40*
% €6,871.06* (15% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
Graco's SaniForce 1040 hygienic air operated double diaphragm pumps feature the best, most durable, lubricant-free air valves in the industry. Excellent for applications where high flow rates and portability are required. Graco's reliable diaphragm pumps offer a wide range of food grade elastomers such as Santoprene, PTFE and moulded EPDM/PTFE.
- 38 mm (1.5'') Tri-Clamp connection
- All wetted materials are FDA approved and fulfil the requirements of Section 21 of the US Code of Federal Regulations (CFR)
- Material pressure up to 0.84 MPa (8.4 bar, 120 psi)
- Flow rates of 151 l/min
- High volume discharge of liquid concentrates from receiving containers or repackaging of materials from the original container into smaller containers - up to 10,000 cps
- Suitable for pumping products such as: concentrated fruit juices, sauces, pastes, starch, wine, cooking oil, jams and jellies
| Air inlet size (inches): | 1/2 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | Hygienic applications |
| Ball material: | PTFE |
| Compatible material: | Cooking oil, food and personal care |
| Connection type: | DIN |
| Distributor O-ring material: | PTFE |
| Distributor configuration: | End opening |
| For use with: | Food and personal care |
| Gender of the air inlet thread: | Internal thread |
| Material: | stainless steel |
| Material in the liquid housing: | 316L stainless steel |
| Material of the centre housing: | stainless steel |
| Material outlet size (cm): | 3.81 |
| Material outlet size (mm): | 38.1 |
| Maximum air pressure (MPa): | 0.8 |
| Maximum air pressure (bar): | 8 |
| Maximum air pressure (kPa): | 800 |
| Maximum air pressure (psi): | 120 |
| Maximum delivery rate (L/min): | 151 |
| Maximum material pressure (MPa): | 0.8 |
| Maximum material pressure (bar): | 8 |
| Maximum material pressure (kPa): | 800 |
| Maximum material pressure (psi): | 120 |
| Maximum number of cycles (DH/min): | 256 |
| Maximum solids size (cm): | 3,175 |
| Maximum solids size (mm): | 3,175 |
| Membrane, compatible material: | PTFE |
| Membrane material: | PTFE |
| Model: | SaniForce |
| Seat material: | 316L stainless steel |
| Series: | 1040 |
| Size of the exhaust air opening (inches): | 3/4 |
| Size of the material inlet opening (cm): | 3.81 |
| Size of the material inlet opening (inches): | 1 |
| Size of the material inlet opening (mm): | 38.1 |
| Size of the material outlet opening (inches): | 1 |
| Standards met:: | ATEX, CE, FDA compliant materials |
| Supply voltage: | Pneumatic |
| Thread of the exhaust air opening (inside/outside): | Internal thread |
| Thread of the exhaust air opening (type): | NPT |
| Transmission ratio of the pump: | 1:1 |
| Type: | Pneumatic diaphragm pump |
More information
- Product number: 1030926
- Manufacturer: Graco
- EAN: 00633955677852
- Weight: 28.313 kg
- Length: 170 mm
- Width: 95 mm
- Height: 180 mm
Reviews
Register
