Manufacturer no.:
24Y165
Reactor A-XP1 dispenser with wheels, DataTrak
€22,669.50*
Ready for shipping in 5-8 days
Also interesting
Product information
The Reactor A-XP1 is a Graco-engineered coating applicator that offers the reliability required on the job site. It features constant temperature control, even when spraying at maximum flow rates – resulting in a better foam quality.
For polyurea coatings – applies up to 5.7 litres (1.5 gal) per minute.
- Maintains temperature set point for improved yields
- Maintains consistent output pressure for a uniform spray pattern
- Easy operation and maintenance
- Best choice for affordability and durability
Three heating zones
- Three independent heat zones - ISO, resin and hose heater
- Precise temperature control for reliable spraying of varying chemical viscosities
- Digital temperature controllers
Three heating zones
- Three independent heating zones – ISO, resin and hose heater
- Accurate temperature control for reliable spraying to handle different chemical viscosities
- Digital temperature controllers
Circulation manifold
- The quick and easy way to compensate for pressure fluctuations in the system.
NXT air motor
- Higher efficiency due to low air consumption
- Low noise operation due to silencer
- The air valve ensures smooth and fast changeover
ISO pump lubrication system
- Prevents isocyanate crystallisation on the pump seal and pump shaft
Hybrid heater
- with better temperature control
| Air inlet size (inches): | 1/2 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | Protective coatings |
| Applicator type: | Hand- |
| Compatible material: | Multicomponent materials |
| Component A, inlet size (inch): | 3/4 |
| Component A, inlet size (mm): | 19.05 |
| Component A, thread gender: | Internal thread |
| Component A, thread type: | NPT |
| Component B, inlet size (inch): | 3/4 |
| Component B, inlet size (mm): | 19.05 |
| Component B, thread gender: | Internal thread |
| Component B, thread type: | NPT |
| Component type: | Two-component |
| Frequency (Hz): | 50/60 |
| Gender of the air inlet thread: | Internal thread |
| Gun type: | No gun |
| Includes: | Dispenser, Heated Hose, Wheels, DataTrak |
| Material application.: | Polyurea |
| Maximum air inlet pressure (MPa): | 0.86 |
| Maximum air supply pressure (bar): | 8.62 |
| Maximum air supply pressure (kPa): | 862 |
| Maximum delivery rate (L/min): | 5.68 |
| Maximum flow rate (cm³/min): | 5680 |
| Maximum hose length (m): | 64 |
| Maximum inlet air pressure (psi): | 125 |
| Maximum material temperature (°C): | 88 |
| Maximum material viscosity (cP): | 1500 |
| Maximum mixing ratio: | 1:1 |
| Maximum operating pressure (MPa): | 24.1 |
| Maximum operating pressure (kPa): | 24100 |
| Maximum operating pressure (psi): | 3500 |
| Minimum material viscosity (cP): | 250 |
| Model: | reactor |
| Noise pressure level, (dB(A)): | 70.2 |
| Permissible operating pressure (bar): | 241 |
| Phases: | 1, 3 |
| Print type: | High pressure |
| Product type: | multi-component |
| Rated power (W): | 13000 |
| Rated power (kW): | 13 |
| Series: | A-XP1 |
| Sink type: | solvent |
| Size of the air inlet (cm): | 1.27 |
| Size of the air inlet (mm): | 12.7 |
| Sound level, (dB(A)): | 80.1 |
| Supply voltage: | Air |
| System includes: | DataTrak and wheels |
| Total depth (cm): | 76.2 |
| Total depth (mm): | 762 |
| Total height (cm): | 110.5 |
| Total height (mm): | 1105 |
| Total width (cm): | 73.7 |
| Total width (mm): | 737 |
| Type: | Dosing system |
| Voltage (V): | 230, 400 |
| Weight (kg): | 140.6 |
| Wetted material: | Mild steel, stainless steel, chrome, aluminum, fluoroelastomer, PTFE, nylon |
More information
- Product number: 1036043
- Manufacturer: Graco
- EAN: 00755652300199
- Weight: 168.516 kg
- Length: 900 mm
- Width: 880 mm
- Height: 1300 mm
Technical details
Operating specifications
| UPC product | 755652300199 |
|---|---|
| Division | CED |
| Price Block | 026 |
| Country of origin | CN |
| Unit | EA |
| Height | 130 CM |
| Length | 90 CM |
| Width | 88 cm |
| Volume | 1 .03 m³ |
| Shipping weight | 168.52 KG |
Technical
| Air inlet size (cm) | 1. 27 |
|---|---|
| Air inlet size (in) | 1/2 |
| Air inlet size (mm) | 12. 7 |
| Air inlet thread gender | Female |
| Amperage (A) | 26 @ 380 V ac (3-phase WYE), 45 @ 230 V ac (3-phase Delta), 56 @ 230 V ac (1-phase ) |
| Component A inlet size (in) | 3/4 |
| Component A inlet size (mm) | 19. 05 |
| Component A Thread Gender | Female |
| Component A Thread Type | NPT |
| Component B inlet size (in) | 3/4 |
| Component B inlet size (mm) | 19. 05 |
| Component B Thread Gender | Female |
| Component Type | Two Component |
| Frequency (Hz) | 50/60 |
| Includes | Proportioner, heated hose, wheels, DataTrak |
| Material application | Polyurea |
| Maximum air consumption (SCFM) | 32 scfm at 2000 psi |
| Maximum air inlet pressure (bar) | 8. 62 |
| Maximum air inlet pressure (kPa) | 862 |
| Maximum air inlet pressure (psi) | 125 |
| Maximum flow rate (cc/min) | 5680 |
| Maximum flow rate (L/min) | 5. 68 |
| Maximum fluid temperature (°C) | 88 |
| Maximum fluid temperature (°F) | 1 90 |
| Maximum fluid viscosity (cP) | 1 5 00 |
| Maximum Hose Length (ft) | 2 10 |
| Maximum hose length (m) | 64 |
| Maximum Mix Ratio | 1: 1 |
| Maximum working pressure (bar) | 2 41 |
| Maximum working pressure (kPa) | 2 4 100 |
| Maximum working pressure (MPa) | 24. 1 |
| Maximum working pressure (psi) | 3 5 00 |
| Minimum fluid viscosity (cP) | 2 50 |
| Overall Depth (cm) | 76. 2 |
| Overall depth (in) | 30 |
| Overall depth (mm) | 762 |
| Overall height (cm) | 110. 5 |
| Overall height (in) | 43. 5 |
| Overall height (mm) | 1105 |
| Overall width (cm) | 73. 7 |
| Overall width (in) | 29 |
| Overall width (mm) | 737 |
| Power Rating (HP) | 17. 43 |
| Power rating (kW) | 13 |
| Power rating (W) | 1 3 000 |
| Product Type | Plural Component |
| Sound pressure level (dB(A)) | 70. 2 |
| Weight (kg) | 140. 6 |
| Maximum air inlet pressure (MPa) | 0. 86 |
| Model | Reactor |
| Series | A-XP1 |
| system_includes | DataTrak and Wheels |
Further manufacturer information
Produktbroschüre
Produkthandbücher
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Deutsch)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (English)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (中文)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (日本語)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (한국어)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Français)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Español)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (русский)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Nederlands)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Italiano)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Polski)
- 3A2018K, Reactor A-25/A-XP1 Betrieb (Deutsch) (Türkçe)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Deutsch)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (English)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (中文)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (日本語)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (한국어)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Français)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Español)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (русский)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Nederlands)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Italiano)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Polski)
- 3A2534U, Handbuch, Reactor A-25/A-XP1, Anleitung (Türkçe)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (English)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (中文)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (日本語)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (한국어)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Français)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Español)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (русский)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Nederlands)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Italiano)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Polski)
- 313541L, Manual, DataTrak Kits, Instructions and Parts, English (Türkçe)
Verkaufsliteratur
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Deutsch)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Português)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (русский)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Magyar)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (English (UK))
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Español)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Français)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Italiano)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Nederlands)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Polski)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Svenska)
- 300615DE REACTOR™ GERÄTE ZUM SPRITZEN VON PU-SCHAUM UND POLYUREA (Türkçe)
Zertifizierungen
Reviews
Register
