Manufacturer no.:
H60T18
Pro Xp60 AA WB manual air spray gun with air assistance, 60 kV, standard display, for water-based materials
€8,035.12*
% €11,478.74* (30% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
Superior air-assisted spray pattern control for waterborne materials prevents defects in fine coatings.
For applying waterborne conductive materials with the insulation system
- This 60 kV model is the smallest and lightest air-assisted spray gun on the market.
- The air-assisted air caps use less air and reduce your electricity bill.
- Made in the USA
- This air sprayer is the smallest gun with a built-in power supply on the market: 1 inch shorter and 4 ounces lighter
- The pattern adjustment control reduces overspray by changing fan width to match the size of the part, saving you money and improving quality
- Each gun is tested and delivered with a certificate indicating that the spray pattern, mechanical and electrical performance meets Graco's requirements and your expectations.
| Air inlet size (inches): | 1/4 |
|---|---|
| Air inlet thread type: | NPSM |
| Application: | Electrostatics, water based |
| Applicator type: | Hand- |
| Coating type: | Water based |
| Compatible colour type: | Epoxy, high solids content, clear coats, latex, multi-component materials, polyurethanes, urethane, UV curing, varnishes, water-based |
| Display type: | standard |
| Gender of the air inlet thread: | External thread |
| Gender of the material inlet thread: | External thread |
| Gun activation: | Hand- |
| Gun type: | Electrostatics |
| Gun weight (g): | 660 |
| Gun weight (kg): | 0.66 |
| Gun weight (oz): | 23.28 |
| Includes: | Nozzle protection air cap, nozzle of your choice, tool kit, gun cover, exhaust pipe |
| Material inlet thread type: | NPSM |
| Maximum colour resistance (megohm/cm): | 1 |
| Maximum material pressure (MPa): | 21 |
| Maximum material pressure (bar): | 210 |
| Maximum material pressure (kPa): | 21000 |
| Maximum material pressure (kg/cm²): | 214.14 |
| Maximum material pressure (psi): | 3000 |
| Maximum material temperature (°C): | 48 |
| Minimum colour resistance (megohm/cm): | 0 |
| Model: | Pro XP |
| Series: | 60 |
| Size of the air inlet (cm): | 635 |
| Size of the air inlet (mm): | 6.35 |
| Size of the material inlet opening (inches): | 1/4 |
| Spraying technology: | Electrostatics |
| Technology type: | Air-assisted |
| Total length (cm): | 24.64 |
| Total length (mm): | 246.4 |
| Type: | Electrostatic gun |
| Voltage (kV): | 60 |
More information
- Product number: 1031891
- Manufacturer: Graco
- EAN: 00633955248229
- Weight: 1.676 kg
- Length: 420 mm
- Width: 240 mm
- Height: 190 mm
Reviews
Register
