King E60 Hazardous areas Wall mounted Integrated filter SINGLE
€11,150.78*
% €13,118.56* (15% saved)Ready for shipping in 5-8 Werktage
The King E-Series electric airless sprayer from Graco is designed for protective coatings and selected models are approved for hazardous locations. The King E-Series works with a more reliable, convenient and available electrical power source, eliminating dependence on job-site compressed air. The electric solution ensures fewer pulsations and prevents the motor from freezing, so you can always work without incident.
The superior electric solution for protective coating application
- Electric – When wired properly, electric is safe, reliable and convenient for you and your customers. Free your operation from the reliability of an air compressor. No more unscheduled downtime for large compressors.
- No icing – Since no air motor is required, icing problems are a thing of the past. In very high humidity, icing of a motor can cause motor slow down and pressure loss, which can negatively impact your production output. The King E-Series sprayer is an electric solution where you continuously get the maximum pumping potential in all conditions.
- Reduced noise: Noise significantly worsens your working conditions. The quiet electric motor provides a much more pleasant working environment. Compared to an air motor, the King E-Series is up to five times quieter.
- Plug-in & Spray – The King E-Series runs on multiple power options (120V or 240V). It can be used with the most common airless nozzle sizes from Graco and, thanks to low pulsation, offers an even spray pattern. This even spray pattern is noticeable at the spray gun. It can spray most high-solid coatings and will surely quickly become your go-to KING!
- ATEX approved – Get every job done safely: Unlike other electric sprayers, the King E-Series is approved for use in hazardous areas. ATEX, IECEx and Class 1, Div. 1 approvals mean this KING can be used in chemical plants, paint shops, refineries, offshore and anywhere else where there must be no sparking.
- Energy savings – Improved efficiency and lower total cost of ownership: The King E-Series is the most economical solution compared to pneumatic airless sprayers. Compared to an air-powered sprayer, the King E-Series can save you up to 80% on energy costs*. Expensive, heavy air compressors are no longer needed, and you can stay productive using the most reliable power source of all – electricity! *Study of pump pressure of 241 Psi (3500 Bar) – 20 hours/week; spraying with 1,226 litres (324 gallons) – 73% solid epoxy and XHD519 nozzle.
- Three-year warranty – Every piece of equipment we manufacture is backed by one of the industry's most comprehensive warranties. The King E-Series offers a three-year warranty on the gear drive, housing and electric motor. The electronics and all other power train components of the King E-Series are covered by the standard one-year warranty. Please refer to the operator's manual for complete warranty information.
Authorisation for hazardous areas: | Yes |
---|---|
Compatible material: | Protective coating |
Control type: | Pressure regulator button |
Frame configuration: | Wall mounting |
Frequency (Hz): | 50/60 |
Gender of the material inlet thread: | External thread |
Gender of the material outlet thread: | External thread |
Gun included: | 0 |
Hose inlet diameter (cm): | 9,525 |
Hose inlet diameter (inch): | 3/8 |
Hose inlet diameter (mm): | 9,525 |
Inlet colour screen: | Mesh size 8, mesh size 16 |
Material application.: | Protective coatings |
Material inlet thread type: | NPT |
Material outlet size (mm): | 12.7;9.525 |
Material outlet thread type: | NPT |
Maximum continuous double stroke rate (DH/min): | 44 |
Maximum delivery rate (L/min): | 2.6 |
Maximum hose length (m): | 64 |
Maximum nozzle size (inch): | 21 |
Maximum operating pressure (MPa): | 42 |
Maximum operating pressure (kPa): | 41500 |
Maximum operating pressure (psi): | 6000 |
Maximum operating temperature (°C): | 50 |
Maximum sound pressure level (dB(A)): | 77 |
Minimum generator output (W): | 5000 |
Minimum generator output (kW): | 5 |
Minimum operating temperature (°C): | -5 |
Model: | King |
Motor type: | Electrical, hazardous areas |
Number of guns: | 1-2 |
Outlet colour screen: | Mesh size 60 |
Permissible operating overpressure (psi): | 6000 |
Permissible operating pressure (bar): | 415 |
Phases: | 1 |
Pistol model: | No applicator |
Pressure control type: | Electric control button |
Product type: | One-legged |
Pump rod type: | Chromex |
Pump sleeve material: | Hard chrome plated, stainless steel |
Pump type: | Pneumatic piston pump |
Series: | E60 |
Size of the material inlet opening (inches): | 1 |
Size of the material inlet opening (mm): | 25.4 |
Size of the material outlet opening (inches): | 1/2, 3/8 |
Sub pump type: | Lower pump Xtreme Duty 115 cm³ |
Supply voltage: | Electric |
Transmission ratio of the pump: | 60:1 (6000psi) |
Type: | Airless sprayer |
Weight (kg): | 134 |
Wetted material: | Mild steel, alloy steel, stainless steel, galvanized, nickel plating, ductile iron, tungsten carbide, PTFE, leather, aluminum |
- Product number: 1038243
- Manufacturer: Graco
- EAN: 00769946174564
Register