Husky 515 1/2" NPT AC pump, PP centre housing, AC seats, PTFE balls and PO diaphragm
€1,680.10*
% €1,976.59* (15% saved)Ready for shipping in 5-8 Werktage
Our Husky air operated double diaphragm pumps are packed with useful features to help you get the job done right every time, and they're designed to save you money. The Husky 515 air operated double diaphragm pump is equipped with a non-blocking and low pulsation air valve that allows for smooth and fast stroke changes. The through-bore material cover prevents material leakage and ensures greater safety with optimised reliability.
Robust construction
- Corrosion-resistant for reliable performance and a long service life
Robust construction
- Ensures durability, increased productivity and lower operating costs
Advantages of the Husky 515 double diaphragm pump
- Centre section and end opening optionally available.
- No mechanical seals to cause material leakage or failure
- Quiet running at less than 85 dB(A) with user-friendly remote silencer for even lower noise levels
- Easy to maintain air and ball check valves
- Requires only 0.14 MPa (1.4 bar, 20 psi)
- Split manifold option to allow multiple materials to be pumped without mixing
- Fully groundable acetal model
- Flow rate up to 15 lpm (56.7 l/min)
- Easy to maintain air and ball check valves
- Reliable air valves for years of continuous operation
- Lube-free for cleaner operation
- DataTrak™ available to prevent pump dry running and track material usage
| Air inlet size (inches): | 1/4 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | industry |
| Ball material: | PTFE |
| Compatible material: | Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Gear Oil, Cutting Oil, Water - Wastewater Treatment, Ink |
| Connection type: | With thread |
| Distributor O-ring material: | PTFE |
| Distributor configuration: | Connection in the centre: |
| Gender of the air inlet thread: | Internal thread |
| Gender of the material inlet thread: | Internal thread |
| Gender of the material outlet thread: | Internal thread |
| Material: | Acetal |
| Material inlet thread type: | NPT |
| Material in the liquid housing: | Acetal |
| Material of the centre housing: | Polypropylene |
| Material outlet size (cm): | 1.27 |
| Material outlet size (mm): | 12.7 |
| Material outlet thread type: | NPT |
| Maximum air pressure (MPa): | 0.7 |
| Maximum air pressure (bar): | 7 |
| Maximum air pressure (kPa): | 700 |
| Maximum air pressure (psi): | 100 |
| Maximum delivery rate (L/min): | 56.8 |
| Maximum material pressure (MPa): | 0.7 |
| Maximum material pressure (bar): | 7 |
| Maximum material pressure (kPa): | 700 |
| Maximum material pressure (psi): | 100 |
| Maximum number of cycles (DH/min): | 400 |
| Maximum operating temperature (°C): | 82 |
| Maximum solids size (cm): | 2,383 |
| Maximum solids size (mm): | 2.4 |
| Membrane, compatible material: | PTFE |
| Membrane material: | PTFE coated |
| Minimum operating temperature (°C): | 4 |
| Model: | Husky |
| Seat material: | Acetal |
| Series: | 515 |
| Size of the exhaust air opening (inches): | 3/8 |
| Size of the material inlet opening (cm): | 1.27 |
| Size of the material inlet opening (inches): | 1/2 |
| Size of the material inlet opening (mm): | 12.7 |
| Size of the material outlet opening (inches): | 1/2 |
| Standards met:: | ATEX, CE |
| Supply voltage: | Air |
| Thread of the exhaust air opening (inside/outside): | Internal thread |
| Thread of the exhaust air opening (type): | NPT |
| Type: | Pneumatic diaphragm pump |
- Product number: 1031089
- Manufacturer: Graco
- EAN: 00633955207363
- Weight: 4.304 kg
- Length: 270 mm
- Width: 205 mm
- Height: 300 mm
Register
