Manufacturer no.:
17E912
FinishPro II 595 PC Pro electric, air-assisted airless sprayer, 230V, EU
€7,990.85*
% €9,401.00* (15% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
The FinishPro II 595 PC Pro is the most powerful air-assisted airless sprayer and is ideal for commercial or industrial use. With more features and a higher flow rate, you can complete larger jobs faster, increasing productivity. Easily switch between airless and air-assisted operation for simple operation on the job site.
With the FinishPro II 595 PC Pro, you benefit from two sprayers in one. With the flip of a switch, you can switch back and forth between air-assisted and airless spraying - for ultimate application versatility and efficiency, so you can complete jobs faster than ever before.
SmartControl with digital display
- Consistent pressure output with every job
- Continuous performance monitoring and adjustment of engine speed to suit spraying requirements
- Measurement of litres/gallons, operating hours and sprayer pressure
- Support messages and diagnostic support
- Ideal for low-pressure nozzles for fine finish and reduced-mist spraying
- FastFlush system
- More spraying and less cleaning
- 4 times faster cleaning of the pump
- Faster material flow due to higher motor speed
- SmartComp
- Outstanding finish and long service life
- Compressor activated by gun trigger - only runs when you spray!
- Immediate air supply to the gun without delay
- Lower noise level at the point of use - less fatigue
- Less moisture ingress into the system and longer compressor life
- "Chromex Endurance piston pump
- The most reliable pump
- Lasts 2 times longer than the next leading brand
- Change pump seals in minutes with the QuikPak cartridge system
- Faster cleaning with the QuikAccess inlet foot valve
- ProConnect pump replacement system
- No more costly downtime
- Pump change in minutes
- Boltless design requires no tools
- Integrated air compressor with high flow rate
- Ideal for localised paint applications
- Delivers 3.2 ft³/min at 35 psi (0.1 m³/min at 2.4 bar) - enough air to break up the heaviest materials
- Exclusive pressure unloader for quieter operation
- Cooling coil to reduce air temperature for longer life of critical components and safer operation
- G40 air-assisted airless spray gun
- Excellent performance
- Industrial quality for excellent surface finishes
- Integrated air valve for better gun handling
- Airless spray gun "Contractor PC "
- Comfort and control all day long
- The lightest gun in its class
- Up to 50 % less trigger force
- Length-adjustable "E-Z Fit" trigger
- Conversion of the complete gun in seconds with ProConnect
- Super-Flex hose
- More flexibility and manoeuvrability
- Enables work in confined areas and delivers optimum finish quality
- Extremely lightweight, reduces fatigue
- Less material build-up and increased durability with "Flex Wrap" hose cover
- Super-Flex hose
- More flexibility and manoeuvrability
- Enables work in tight areas and delivers optimum finish quality
- Extremely lightweight, reduces fatigue
- Less material build-up and increased durability with "Flex Wrap" hose panelling
| Compatible replacement pump: | 17C489 |
|---|---|
| Convertible: | Not convertible |
| Filter mesh size: | 100 |
| Frame configuration: | Hi boy |
| Frequency (Hz): | 60 |
| Hose diameter (inch): | 1/4 |
| Hose inlet diameter (cm): | 635 |
| Hose inlet diameter (inch): | 1/4 |
| Hose inlet diameter (mm): | 6.35 |
| Inner diameter of material hose (inch): | 1/4 |
| Material outlet size (mm): | 6.35 |
| Material outlet thread type: | NPSM |
| Maximum delivery rate (L/min): | 2.6 |
| Maximum hose length (m): | 45 |
| Maximum nozzle size (inch): | 27 |
| Maximum nozzle size 1 gun (inch): | 27 |
| Maximum operating pressure (kPa): | 2270 |
| Maximum operating pressure (kg/cm²): | 22.7 |
| Maximum operating pressure (psi): | 3300 |
| Maximum sound pressure level (dB(A)): | 79 |
| Minimum generator output (W): | 5000 |
| Minimum generator output (kW): | 0 |
| Model: | FinishPro II |
| Motor size (kW): | 1.19 |
| Motor type: | Brushless, DC |
| Number of guns: | 1 |
| Outlet colour screen: | 60 mesh stainless steel sieve |
| Permissible operating overpressure (psi): | 3300 |
| Permissible operating pressure (bar): | 227 |
| Phases: | 1 |
| Pressure control type: | SmartControl |
| Pump mounting type: | ProConnect |
| Pump rod type: | Chromex |
| Pump sleeve material: | Hardened stainless steel |
| Pump type: | Endurance |
| Rated power (kW): | 01.04 |
| Region Plug type: | EU region (plug type C, E & F) |
| Series: | 595 PC Pro |
| Size of the material outlet opening (inches): | 1/4 |
| Spray gun type: | G40 pistol |
| Spraying technology: | Airless, airless with air atomization |
| Supply voltage: | Electric |
| Total height (cm): | 103 |
| Total height (mm): | 18,288,000 |
| Total length (cm): | 59.1 |
| Total length (mm): | 590.55 |
| Total width (cm): | 52.1 |
| Total width (mm): | 13,233,400 |
| Type: | Air Assisted Airless Sprayers |
| Voltage (V): | 230 |
| Weight (kg): | 51 |
| Wetted material: | Galvanized Carbon Steel, Nickel Plated Carbon Steel, Nylon, Stainless Steel, PTFE, Acetal, Leather, UHMWPE, Aluminum, Carbide |
More information
- Product number: 1036986
- Manufacturer: Graco
- EAN: 00755652820499
- Weight: 62.142 kg
- Length: 670 mm
- Width: 600 mm
- Height: 800 mm
Reviews
Register
