Elcometer Tungsten Carbide Straight Bore Nozzle for Elcometer 1020
€1.23
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Blast nozzle in the selected size
- Rubber gasket for nylon nozzle holders
Straight bore blast nozzle – made for the Elcometer 1020
This blast nozzle is suitable for the Elcometer 1020 Abrasive Blast Machine and ideal for close up cleaning of small parts. The straight bore creates a tight blast pattern for spot blasting – for parts cleaning, weld seam shaping, cleaning handrails, steps and grillwork or carving stone. The tungsten carbide liner is encased in an aluminium jacket, offering the greatest resistance to impact or flexing. Supplied with a rubber gasket.
A larger orifice produces a greater blast coverage area but needs more air capacity from the compressor; a smaller orifice gives a narrower pattern and uses less air. As a general rule, replace the nozzle when the orifice has worn by one nozzle size – easy to check with the Elcometer 103 Blast Nozzle Gauge.
At a glance
- For the Elcometer 1020: matching ¾" fine thread and 13 mm entry
- Precise: tight blast pattern for spot and detail work
- Rugged: tungsten carbide in aluminium, greatest resistance to impact or flexing
- ¾" fine thread: for smaller hose diameters and the Elcometer 1020 Abrasive Blast Machine
- With rubber gasket: seals between nozzle and holder and helps reduce pressure loss
Sizes compared
| No. | Orifice | Length | Entry | Thread | Order number |
|---|---|---|---|---|---|
| #2 | 3.2 mm (1/8") | 45 mm | 13 mm (½") | ¾" fine | MT29472-2F |
| #3 | 4.8 mm (3/16") | 45 mm | 13 mm (½") | ¾" fine | MT29472-3F |
| #4 | 6.35 mm (1/4") | 45 mm | 13 mm (½") | ¾" fine | MT29472-4F |
| #5 | 8 mm (5/16") | 45 mm | 13 mm (½") | ¾" fine | MT29472-5F |
| #6 | 9.5 mm (3/8") | 45 mm | 13 mm (½") | ¾" fine | MT29472-6F |
| #8 | 12.5 mm (1/2") | 45 mm | 13 mm (½") | ¾" fine | MT29472-8F |
Which bore lining is right?
- Tungsten carbide (TC): relatively inexpensive and impact resistant – ideal where rough handling cannot be avoided and with mineral, glass or coal slag abrasives
- Silicon carbide (SC): impact resistant and durable like tungsten carbide, but approximately one third of the weight – ideal for long blasting periods
- Silicon nitride (SN): outstanding wear resistance and up to 50 % lighter than other nozzles of the same size – reduces operator fatigue
- Boron carbide (BC): extremely hard wearing, up to ten times the longevity of tungsten carbide – ideal for aggressive abrasives
- Product number: 2151974
- Manufacturer: Elcometer
Technical details
| Manufacturer order numbers | MT29472-2F, MT29472-3F, MT29472-4F, MT29472-5F, MT29472-6F, MT29472-8F |
| Bore lining | Tungsten carbide (TC) |
| Jacket | Aluminium |
| Bore shape | Straight bore |
| Thread | ¾" (19 mm) fine thread |
| Entry diameter | 13 mm (½") |
| Nozzle sizes | #2, #3, #4, #5, #6, #8 (3.2–12.5 mm) |
| Lengths | 45 mm |
| Supplied with rubber gasket | yes |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Matching accessories: replacement rubber gaskets (MT29212-…), aluminium (ANH-…) and nylon (NNH-…) blast nozzle holders, Elcometer 103 Blast Nozzle Gauge.
Downloads
Register
